|
| 1 | Earthwork in excavation in all kinds of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the earth transported by transport vehicles disposing at places as directed with supply of all labour, materials, T&P, taxes, as directed by the Engineer-in-charge. (Excluding cost of GST) |
| 2 | Shoring and shutteringfor foundation trenches, pits etc. with supply of38 mm thick non sal planks for poling boards and 10 mm thick non sal planks for walling and 125 mm dia non sal bullah for strutting including puttingclose thewooden planks sheets for protection of excaveted earth pit with supply of all labour, materials, T&P, taxes, tollage, royalties,transportations etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 3 | Sump foundation from 1.50m to 3.00m depth |
| 4 | Pump room foundation upto 1.50m depth |
| 5 | Filling in foundation and plinth with filling sand(dredged spoil) including watering, and ramming with supply of all labour, materials, water charges, T&P, taxes,transportations loading & unloading etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) (NB : 10% voids to be deducted from actual measured qty. at site). |
| 6 | Back Filling in foundation and plinth with excavated materials including watering and ramming, water charges with supply of all labour, materials, T&P, taxes, transportations etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 7 | P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing, hosting, laying to proper level & slope, compacting, curing including cost & supply of all materials, labour, T&P, taxes, tollage, royalties,transportations,testing charges, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 8 | Cement concrete (1:2:4) using 12mm to 20mm size C.B.G. chipsfor all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, transportations,testing charges, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 9 | Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chipsfor all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, testing charges,water charges,transportations etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 10 | Supply Tor/TMT steel of Fe-500 grade manufactured from integrated steel plant confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges,loading & unloading charges , testing charges, T&P, taxes, tollage, royalties etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) (NB: No payment shall be made for extra weight than theoretical co-efficient). |
| 11 | 25mm. (av) thick graded cement concrete in C.C.(1:2:2) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, transportations,loading & unloading charges , curing,testing charges, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 12 | Providing rigid smooth leak proof centering & shuttering made ofsteel/ply, plankof approved quality for R.C.C.structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage,transportations,loading & unloading charges , etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 13 | R.C.C. foundation and footing bases of columns, mass concrete & pre-cast slab etc. |
| 14 | RCC wall & fins |
| 15 | Beam, column, girder |
| 16 | Lintel |
| 17 | Roof slab, landing, projection Chajja upto 4.30 mtr. |
| 18 | RCC Stairs excluding landing but including railings |
| 19 | Brickwork in Fly Ash Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) includingsplay/cutting, raking out the joints curing, hoisting, curing, staging at any heightwith cost and supply of all materials, labour, T&P, taxes, royalties, transportation,loading & unloading charges , testing charges, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 20 | Foundation & Plinth |
| 21 | Ground Floor |
| 22 | 16 MM thick Cement plaster with cement mortar (1:6) proportion, over brickwork including raking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding at any height, curing, taxes,tollage, royalties,transportation,loading & unloading charges , water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 23 | Neat cement punning over cement plaster using cement @2.20 kg/m2 & curing with cost of labour, materials, T&P, taxes, royalties,tollage,transportation,loading & unloading charges , water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 24 | 12 mm thick Cement plaster with cement mortar (1:6) proportion, over brickwork including raking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding at any height, curing, taxes, tollage, royalties,transportation,loading & unloading charges , water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 25 | Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, royalties,tollage,transportation,loading & unloading charges , staging, scaffolding at any height etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 26 | Supplying, fitting, fixing of 32mm thick factory made door shutter out of piasal wood styles & rails &12mm thick B.W.R ply of two panels. The styles width should be 100mm top & bottom rail width should be 200mm & lock rail width should be 150mm and panel should be 12 mm thick B.W.R Plyembedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mmwith 175mm x 40mm flat aluminum handles, 2 nos. of 250 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats & sand blocks & hinges with all cost of materials, labour, T&P, taxes, royalties,tollage, transportation,loading & unloading charges ,scaffolding up to any height etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 27 | Supplying, fitting, fixing of 32mm thick factory made window shutters made out of piasal wood styles & rails and 9mm thick B.W.R ply with three panels. The styles width should be 75mm, top and bottom rail & middle two rails width should be 75mm & panel should be of 9mm thick B.W.R ply embedded16mm to styles and rails with 02nos. of 75mm with 118mmx33mm flat aluminum handles,04 nos. of 100mmx10mm aluminum tower bolts & required nos. of wooden hinged cleats & sand blocks and hinges with all cost of materials, labour, T&P, taxes, royalties, tollage,transportation,loading & unloading charges , scaffolding up to any height etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 28 | Supplying fitting & fixing 32mm thick piasal wood fully glazed shutter with 5mm thick plain/frosted/colour glass panels to required size including cutting grooves in frames for window of approved quality & necessary fittings with supply of all labour, materials, scaffolding up to any height transportation charges T&P,all taxes, royalties,tollage, transportation,loading & unloading charges , curing, staging, scaffolding at any height etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 29 | Supplying fitting fixing of 8mm thickceramicfloortiles ( premium Quality 300 x300 mm or 400 x 400 mmsize)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning, curingcomplete including supply of all labour material taxes,tollage, royalties,transportation,loading & unloading charges , water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 30 | Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles ( premimum Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaningcomplete including supply of all labour material, taxes,royalties, tollage, transportation, curing, staging, scaffolding up to any height, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 31 | Providing, supplying, fitting, fixing of M.S. grills for windows of approved quality & design including fabrication charges, with supply of all labour, T&P, materials, taxes,royalties,tollage,transportation,loading & unloading charges , staging, scaffolding up to any height etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 32 | Providing fitting and fixing the fabricted MS structures after cutting, bending, making holes, jointing ,welding as per requirement and Hoistingfabricated structurals, placing in positionas per the drawings or as directed with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables, hire and running charges of all kind of equipments, royalties,tollage,transportation,loading & unloading charges , scaffolding up to any height etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 33 | Painting two coats with approved quality & shade enamel wood / Iron paint onnew work / old work over one coat of primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, tollage, royalties,transportation,loading & unloading charges , staging, scaffolding, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 34 | One coatpriming with water bond cement primer to the newly plaster surface of the exterior / interior wall surface of the interior wall of approvedmake&shadeto make an even finished surface in all heights with all scaffolding and staging including cost and supply of all materials, labour, T&P, all taxes, tollage, royalties, transportation,loading & unloading charges , staging, scaffolding, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 35 | Paintingtwo coat with acrylic base plastic emulsion paint of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, tollage, royalties,transportation,loading & unloading charges , staging, scaffolding, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 36 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, tollage, royalties,transportation,loading & unloading charges , staging, scaffolding, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 37 | Supplying, fitting & fixing of following C-PVC, PVC & CP ofISI make conformingfor water supply & sanitary work including cement & plumbing solvent etc. all complete at any height & any level including cost & supply of all materials, labours, T&P, all taxes tollage, royalties,transportation,loading & unloading charges , staging, scaffolding, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 38 | 15mm dia pipe with all fittings |
| 39 | 20mm dia pipe with all fittings |
| 40 | 25mm dia pipe with all fittings |
| 41 | 40mm dia pipe with all fittings |
| 42 | 150mm dia pipe& vent cowl for sump |
| 43 | 20mm dia ball valve |
| 44 | 25mm dia ball valve |
| 45 | 40mm dia ball valve |
| 46 | 32mm dia long flush bend |
| 47 | 15mm dia CP angular stop cock |
| 48 | 15mm dia CP concealed stopcock |
| 49 | 20mm dia CP concealed stopcock |
| 50 | 10lit. Capacity low level cistern |
| 51 | Hand wash basin with pedestal |
| 52 | 15mm dia CP pillar cock |
| 53 | 100mm dia CP grating |
| 54 | Porcelain commod with seat cover (P-Trap) |
| 55 | 15mm dia CP long body bibcock |
| 56 | 15mm dia CP 600mm long flexible connection pipe |
| 57 | 32mm CP Waste full thread 80mm long |
| 58 | 32mm PVC waste pipe for basin |
| 59 | CP shelf (20\" x 5\") |
| 60 | 5mm bevelled edge plate glass mirror(24\"x18\") with masonite board and screw |
| 61 | CP towel ring |
| 62 | CP towel rail (24\" x 8\") |
| 63 | Soap holder |
| 64 | C-PVC Clamp with nail (15mm to 50mm) |
| 65 | 110mm Pipe |
| 66 | 75mm Pipe |
| 67 | 110mm door bend |
| 68 | 110mm Plain bend |
| 69 | 110mm dia S/J with door |
| 70 | 110mm dia Nahani Trap |
| 71 | 110mmdia offset |
| 72 | 110mm dia vent cowl |
| 73 | 110mm PVC clamp with nail |
| 74 | 110mm dia socket |
| 75 | 75mm dia socket |
| 76 | 75mm Plain bend |
| 77 | 75mm door bend |
| 78 | 75mm dia S/J with door |
| 79 | 75mm dia vent cowl |
| 80 | 75mm PVC clamp with nail |
| 81 | 500ltr capacity PVC sintex tank white colour - (3core) |
| 82 | 65mm dia Jam nut with washer & all complete |
| 83 | 25mm dia Jam nut with washer & all complete |
| 84 | Constructing of Manhole Chamber including earthwork excavation in all kinds of soil, backfilling the same after work done, with CC(1:3:6) using 40mm & down CB metal of approved qty. over the bed of 0.25M thick, KB Brick having crushing strength not less than 75Kg/Cm² to 99Kg/Cm², RCC cover slab with CC(1:2:4) using 20mm & down CB chips of approved qty. including bending, binding of Tor steel with binding wire 18 to 20 gauge & centering/shuttering, Cement plastering(1:3) of 12mm thick to outside & inside& neat cement punning to the inside surface wall & flooring as per the approved specification & design Size(1200 x1200 x 900)mm with cost & supply of all materials, labour, T&P, tollage, royalties,transportation,loading & unloading charges , curing, water charges etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) |
| 85 | Dewatering of accumulatedwater by engaging required numbers of 10HP diesel pump with all accessories, T&P, suction & disposal pipe with fuel consummable , operator charges, engagement hire & running charges of equipmentwith cost & supply of all materials, labour, T&P, tollage, royalties,transportation,loading & unloading charges , etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST)(N.B: 1. No idle charges shall be paid. 2. Payment shall be made as per logbook . ) |
| 86 | Engagement of chain mounted poclain 2.00 Cum capacity bucket size or equivalent excavator for excavation work, leveling to the existing area, leveling to the sump bed, shifting of all DI flang pipes, shifting & positioning the Submercible pump & loading the extra exvcavated materials from sump foundation to tractor for clearance of work site etc. as required with hirerunning charge of machineries loading & un-loading of machine, POL fuel consummable , operator charges, engagement hire & running charges of equipmentwith cost & supply of all materials, labour, T&P, tollage, royalties,transportation,loading & unloading charges , etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST)(NB: 1. No idle charges shall be paid, 2. Payment shall be made as per logbook .) |
| 87 | Engagement of Tractor for shifting of extra excavated materials & other debrises from work site to dumping yard or to low laying area within a lead of 6.00 km. for clearance of work site etc. as required with hirerunning charge of machineries ,POL fuel consummable , operator charges, engagement hire & running charges of equipmentwith cost & supply of all materials, labour, T&P, tollage, royalties etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) (N.B: 1. No idle charges shall be paid.2. Payment shall be made as per logbook . ) |
| 88 | Engagement of Hydra for shifting shifting of all CI flange pipes, shifting, positioning & submercible pupm, loading & unloading etc. as required with hirerunning charge of machineries , POL fuel consummable , operator charges, engagement hire & running charges of equipmentwith cost & supply of all materials, labour, T&P, tollage, royalties etc. all completeas directed by Engineer-in-charge.(Excluding cost of GST) (N.B: 1. No idle charges shall be paid. 2. Payment shall be made as per logbook . ) |
| 89 | Supplying , fitting & fixing of following DI pipes / fittings, pumps, & valves ofISI make conformingfor water supply with all required accessories etc. all complete at any height & any level including cost & supply oflabours, T&P, all tollage, royalties,transportation ,loading & unloading charges ,staging, scaffoldings,taxes if any etc. all complete as per the direction of Engineer-in-charge.(Excluding GST). (NB : The payment of following items (from 33.01 to 33.32)shall be made after commissioning of the water supply system ) |
| 90 | Centrifugal Split Case type Pump Kirloskar make or equivalent ISI make of Capacity 270 m3/hr at 40 mtr head, with 45 KW/60 HP, 4 Pole IE2 motor, Cast Iron Body, CI Impeller, Stainless steel shaft(SS 410), fitted with Mechanical Seal, MS fabricated base frame, coupling, coupling guard etc. complete set . |
| 91 | C.I. Tamper proof Kinetic Air Valve of Pressure rating PN 1.6(Without Isolating Sluice Valve), Flange Drilling as per IS : 1538(Table 4 & 6) of Size : 150 mm. |
| 92 | C.I. Foot Valve of Pressure rating PN 0.2, Flange Drilling as per IS : 1538(Table 4 & 6) of Size : 150 mm. |
| 93 | C.I. Non Return Valve of Pressure rating PN 1.6, Flange Drilling as per IS : 1538(Table 4 & 6) of Size : 150 mm . |
| 94 | C.I. Wafer End Centric Butterfly Valve of Pressure rating PN 1.6, Ends : Wafer type to suit mounting between flanges Drilled to IS : 1538(Table 4 & 6) of Size : 200 mm . |
| 95 | Non Rising Spindle C.I. Sluice Valve of Pressure rating PN 1.6, Flange Drilling as per IS : 1538(Table 4 & 6) of Size : 150 mm . |
| 96 | 150 mm dia DI Screwed double flanged pipeof 5.000 Mtr. Length |
| 97 | 150 mm dia DI Screwed double flanged pipe of 2.500 Mtr. Length |
| 98 | 150 mm dia DI Screwed double flanged pipe of 2.000 Mtr. Length |
| 99 | 150 mm dia DI Screwed double flanged pipe of 1.500 Mtr. Length |
| 100 | 150 mm dia DI Screwed double flanged pipe of 1.000 Mtr. Length |
| 101 | 150 mm dia DI Screwed double flanged pipe of 0.500 Mtr. Length |
| 102 | 200 mm dia DI Screwed double flanged pipe of 5.000 Mtr. Length |
| 103 | 200 mm dia DI Screwed double flanged pipe of 2.500 Mtr. Length |
| 104 | 200 mm dia DI Screwed double flanged pipe of 2.000 Mtr. Length |
| 105 | 200 mm dia DI Screwed double flanged pipe of 1.500 Mtr. Length |
| 106 | 200 mm dia DI Screwed double flanged pipe of 1.000 Mtr. Length |
| 107 | 200 mm dia DI Screwed double flanged pipe of 0.500 Mtr. Length |
| 108 | 250 mm dia DI Screwed double flanged pipe of 5.000 Mtr. Length |
| 109 | 250 mm dia DI Screwed double flanged pipe of 2.500 Mtr. Length |
| 110 | 250 mm dia DI Screwed double flanged pipe of 2.000 Mtr. Length |
| 111 | 250 mm dia DI Screwed double flanged pipe of 1.500 Mtr. Length |
| 112 | 250 mm dia DI Screwed double flanged pipe of 1.000 Mtr. Length |
| 113 | 250 mm dia DI Screwed double flanged pipe of 0.500 Mtr. Length |
| 114 | 150mm DI Screwed double flanged Tee. |
| 115 | 200mm DI Screwed double flangedTee . |
| 116 | 150mm dia DI Screwed double flanged Y Tee . |
| 117 | DI Blank flange 10mm thickPlate 150 mm dia . |
| 118 | DI Open flange 10mm thick Plate 150 mm dia. |
| 119 | 150mm dia DI Screwed double flanged 90° bend . |
| 120 | 200mm dia DI Screwed double flanged 90° bend . |
| 121 | 250mm dia DI Screwed double flanged 90° bend . |
