|
| 1 | Supply and replacement of self priming mono block pump set 1 HP of 25x25 mm of (6-50 m) Head & (4250-900) LPH Discharge , 3000 RPM with MS base frame foundation nut bolts washers and rain protection cover i/c conection testing, commissioning etc as reqd i/c rebate for dismantle material |
| 2 | Supply and replacement of 200 mm dia size of stainer installed with 25 mm dia pipe ,cutting welding, providing pipe fittings, elbow, tee reducer etc complete as required i/c testng, commissioning rebate for dismantle material |
| 3 | Supply and replacement of honey cooling pad size of 4500x1250x100 mm thick with aluminium base frame i/c nut bolt washer, packing and water proofing joints i/c testing and commissioning etc as reqd rebate for dismantle material. |
| 4 | Supply and replacement of UPVC pipe 25mm dia confirming to IS 4985:2021 with union elbow, Tee tank connection, testing,commissioning etc complete as reqd. |
| 5 | Supply replacement of spray nozzle fixing of UPVC pipe threading connection, testing, commissioning etc as reqd rebate for dismantle material. |
| 6 | Supply and replacement 25mm dia ball valve with union i/c connection, testing, commissioning etc as reqd rebate for dismantle material. |
| 7 | Supply and replacement of 600 mm dia. metal body Exhaust fan having 6125 C.F.M air delivery at rated RPM to operate on single phase 230 volt, 50 HZ AC Supply with aerodynamically designed & Balanced Blade/impeller, copper windingwith bird guard/louver and protection cover to protect the fan in running condition, arm-set, frame and all required accessories, testing, commissioning as per site condition.i/c rebate for dismantle material |
| 8 | Supply and replacemnet of suitable capacity & rating temperature relay, contactor, MCB as per existing installation with wiring, coneection/interconnection, testing etc. complete as required i/c rebate for dismantle material. |
| 9 | Supplying,replacement, testing and commissioning ofFloor mounted freestanding LT feeder pillarcubical type duly compartmentalised single door of nominal size 1000mm x 900mm x 300mm deep with general arrangemnent made out of 2 mm thick CRCA MS sheet having hinged gasketed cover and screw type knob welding of MS angle ironofsize 40mm x 40mm x 6 mm x 1000mm long grouted on 1:3:6CC foundation , connection, inter-connection with suitable size of FRLS PVC insulated copper conductor earth studs i/csupplying and fixing of following accessories etc. as reqd. (a) 63 Amps. TP &N MCB10 KA----- 2 No.(b) 32 Amp DP MCB- 4 Nos. (c) 100 Amp , Four strip aluminum busbar of suitable size - 1 set (d) 32 A TP MCB(C-curve) -1 No. (e) volt meter indicating Lamp - 1set .(f)Danger notice plate----- 1 No.(g) Lifting hook on the top of the feeder pillar - 1 No. Note: Foundation duly plastered and finished shall be made as per site requirement for which nothing extra shall be paid.Replacing the old panel & i/c rebate for dismantle material. |
