|
| 1 | Supply of 24W (Minimum), 24V DC, high intensityLED light empowered color changing & monochromatic RGBWinground/buried LED light suitable for DMX controller, Ingress Protection(IP-67), for delivering the vibrant colors for illuminations of fountain system as per technical specifications etccomplete as requiredwith 05 Years warranty of complete light fitting from OEM . |
| 2 | Supply, Installation, Testing & Commissioning of DMX Controller (DMX512-Console)suitable for color changing ofRGBWinground/buried LED lights as mentioned in BoQ Item no. 1, including programming of DMX controller with required connector, etc complete as required. |
| 3 | Supply, Installation, Testing & Commissioning of splitter having 06 independent outputs and suitable for DMX512 controllermentioned in BoQ Item no. 2with connectors etc complete as required. |
| 4 | Supply, Installation, Testing & Commissioningof address writer suitable for DMX512 controller mentioned in BoQ Item no. 2with required connectors etc complete as required. |
| 5 | Supply of waterproofpower supply driver 24 Vdc, 150W or suitable rating to feed power supply to 04 nos 24W RGBWinground/buried LED lights mentioned in BOQ Item no-01etc complete as required. |
| 6 | Supply and laying of 2 pair, 2 conductor in each pair, 22 AWG stranded, 120 Ω Characteristic impedance, DMX data communication cable (shielded twisted pair) etc complete as required.Make: Belden, Polycab or equivalent. |
| 7 | Supply of 54W(Minimum) warm white projector LED light made from die cast aluminum housing, powder coating, Toughened glass cover, compact, excellent in heat dissipation, easy to install and maintain with consistent locking hinge with adjustable tilt angles to achieve desired light on the object, high-power led with lenses with various beam angles, minimum luminous flux 3780Lm, Correlated Color Temperature/Color 3045K±175K; Color Rendering Index >70, IP-66 as per technical specifications including suitable driver and 05 years warranty of complete fitting from OEM etc. complete as required. |
| 8 | Supply of 72W (Minimum)warm white projector LED light made from die cast aluminum housing, powder coating, Toughened glass cover, compact,excellent in heat dissipation, easy to install and maintain with constant locking hinge with adjustable tilt angles to achieve desired light on the object, high power led with lenses with various beam angles, minimum luminous flux 5040Lm, Correlated Color Temperature/Color 3045K±175K; Color Rendering Index >70, IP-66 as per technical specifications including suitable driver and 05 years warranty of complete fitting from OEM etc. complete as required. |
| 9 | Supply, Installation, Testing & Commissioning of 5 Pin TConnector with IP67 ingress protection etc complete as required for connection of 24W, RGBWinground/buried LED lights. |
| 10 | Supply of 5 Pin SConnector with IP67 ingress protection including laying in the existing DWC pipe, testing & commissioning etc complete as required for connection of 24W, RGBWinground/buried LED lights. |
| 11 | Supply, Installation, Testing & Commissioning of 2 Pin TConnector with IP67 ingress protection etc complete as required for connection of 54W/72W warm white LEDlights. |
| 12 | Supply of 2 Pin SConnector with IP67 ingress protection including laying in the existing DWC pipe, testing & commissioning etc complete as required for connection of 54W/72W warm white LED lights. |
| 13 | Installation, Testing & Commissioning of 04 Nos RGBWinground/buried LED lights, by recessed in the existing RCC foundation for proper illumination of fountain system including connection of lights with power supply driver, DMX controlleretc complete as required as per site requirement. |
| 14 | Installation, Testing & Commissioning of 04 Nos Warm White projector LED light, on the existing RCC foundation with suitable screw/ fastener for proper illumination of stone craft monuments, including connection with power supply driver etc complete as required as per site requirement. |
| 15 | Formation of foundation for installation of LED warm white and RGBW lights withReinforcement cement concrete (RCC)1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) foundation ofsize 300mm x 300 mm and depth of 500 mm (300 mm below the ground & 200mm above the ground) with provision of suitable iron angle, nut bolt for installation of light, 02 nos 25 mm HDPE pipe, including paint with exterior enamel paint as per direction of EICetc complete as required. |
| 16 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal)DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16205, Part-24:2017 complete with fitting and cutting, jointing etc. direct in the existing trench/in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 17 | Supplying and laying of 40 mm dia (OD-40 mm & ID- 32 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16205, Part-24:2017 complete with fitting and cutting, jointing etc. direct in the existing trench/in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 18 | Supplying and laying of 25 mm outer diaHDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 4984:2016 complete with fitting and cutting, jointing etc. direct in the existing trench/in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 19 | Supply, installation, testing & commissioning of outdoor type LT distribution panel made of 2.0 mm thick CRCA sheet having aluminium bus-bar of100 Amp rating, with suitable M.S angle stand including fixing on cement concrete foundationand consisting the following :-(i) Incomer with 32 A FP MCCB (Ics=Icu=25 KA) with thermal magnetic release.- 01 No.(ii) Outgoing with 32 A FP MCCB (Ics=Icu=25 KA) with thermal magnetic release.- 01 No.(iii)Outgoing with 32 A DP C Curve MCB, Timer and suitable contactor etc.-01 No.The panel should have sufficient space to accommodate the DMX multiplier/splitter/ power supply driver etc. ( DMX multiplier, splitter, power supply will be provided by AAI separately). |
| 20 | Supply of 4C X 6 Sqmm size, XLPE insulated, PVC Inner sheathed, Armoured Copper Conductor cable suitable to work upto 650/1100V, AC Supply confirming to IS:7098 (Part-1) 1988 upto date amendments etc complete as required. |
| 21 | Supply of 3 CX 2.5 Sqmm size FRLS, PVC insulated un sheathed bright anneales Copper Conductor cable suitable to work upto 1100V, AC Supply confirming to IS:694 upto date amendments etc complete as required. |
| 22 | Supply of 4C x 25 Sqmm, 1.1 KV grade, Armoured, XLPE insulated, PVC sheathed, Aluminium conductor cable confirming to IS: 7098 (Part -1) 1988 amended upto date. |
| 23 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Upto 35 sq. mmsize in the existing HDPE/DWC/RCC/Metal/Hume pipe as required. |
| 24 | Supplying and making end termination with brass compression gland and aluminium lugs for 4C x 25 sq.mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 25 | Supplying and making end termination with brass compression glandand Copper lugs for 4C x 6 sq.mm size of XLPE insulated, PVC Inner sheathed, Armoured Copper Conductor cable of 1.1 kV grade as required. |
| 26 | Design, Fabrication, Supply, installation, testing and commissioning of vermin proof, dust proof, front operated, cubicle type, floor mounted, double door, outdoor LT feeder panel made out of 2 mm thick CRCA sheet duly rust inhibited, powder coated paint, fully compartmentalized complete with double hinged front door with lockable arrangement etc. including necessary iron channel stand of size 50X50X5, depth of leg 3 feet (minimum), CC all around of the panel upto 1 Meter, control wiring, with mechanical interlocking, etc. and having following accessories.INCOMER2 Nos. 250 A 4P MCCB(Ics=Icu=36KA) with rotary operating mechanismincluding terminal extension.Each Incomer shall have one set of the following items:Digital Multifunction Meter, suitable for measure Voltage, Current, Energy, frequency, power factor etc. withCT ratio programmable and auto ranging along with suitable range CTs.1 Set of Indication Lamps, LED type, R,Y,Band MCCB \"ON\" lamps.BUS COUPLER1 Nos. 250 A 4P MCCB(Ics=Icu=36 KA) with rotary operating mechanismincluding terminal extension.Bus coupler shall have indication \"ON\" indication lamp.BUS BAR1 Set of 400 A TPN Busbars of aluminium alloy.OUTGOING02 Nos. 160 A TPN MCCB (Ics=Icu=25 KA) with thermal magnetic release.02 Nos. 63 A TPN MCCB (Ics=Icu=25 KA) with thermal magnetic release.02 Nos. 32 A TPN MCCB (Ics=Icu=25 KA) with thermal magnetic release also with Timer and suitable contactor etc.-01 No.06 Sets (1 Set for each outgoing) LED type \"ON\"Indication Lamps. |
