|
| 1 | Supplying and making end termination with brass compression gland and aluminium lugs for 3.5x35SQMM size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 2 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 3.5x35SQmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 3 | Earthingwith G.I. earth pipe4.5mtr long x 40mm dia including accessories and providing masonary enclosure with cover platehaving locking arrangement and watering pipe etc. withcharcoalor coke and salt complete as required. |
| 4 | Providing and fixing 6 SWG dia G.I. Wire in 15 mm dia GI pipe from earth electrode i/c connection with GI nut bolt spring washer excavation and refilling etc as required. |
| 5 | Supplying and drawing 8x1.5+1x1.5SQmm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in the existing steel tubular BFL Pole as required. |
| 6 | Supplying & laying of one number XLPE insulated and PVC sheathed Armoured power cable of 1.1 KV grade of size 3.5 x 35 sqmm, direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering Conf. to IS:7098 part - I of make Havells / Polycab/ KEI. |
| 7 | Supplying & laying of one numberXLPE insulated and PVC sheathed , armoured aluminium power cable of 1.1 KV Grade of size 3.5 X 35 Sq. MM conf to IS: 7098 (Part-I) in the existing masonry open duct as required. makeMake Havells / Polycab /KEI. |
| 8 | Supplying & fixing of loop box withlid (195 x 135 x 90)with 6 amp SP MCB for individual lights ,terminals, plastic gland, lugs and accessories etc. as required. Make sintexGSJBproduct code-2014 or equivalent to Hensel |
| 9 | Supplying and Erection of steel tubular pole, swaged type 11 mtr long design (410 - Sp-57) conforming to to IS-2713-1980-part-I&II amended upto date including providing & fixing M.S. flange of 300mm outer dia & 8mm thick with 4 Nos, 18mm dia holess (symmetrically located) for holding lighting brackets, nuts etc. necessary holes G.I. nuts and bolts, washers, arrangements for fixing of earthing studs (2 Nos) for earthing including painting with aluminium paint after applying 2 coats of approved quality primer of anti-corrosive primer etc as per specifications & Erection of steel tubular poles of 11 mtr length in cement concrete 1:3;6 (1cement, 3 coarse sand, 6 graded stone aggregate 40mm nominal size) foundation after providing cement concrete 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) pole base of size 900mmx900mmx200mm depth at the bottom of pole for resting of the MS base plate including excavation refilling etc.as required with collar size 400mmx400mmx850mm (height) from the ground level as per drawing attached as required |
| 10 | Erection/Fixing of pole bracket on 11mtr long steel tubular pole after assembling the accessories at site with suitable size of nut-bolts & washers & painting with aluminium paint after applying 2 coats of approved quality primer including nuts & bolts & washers required for fixing the bracket on the pole etc. as required |
| 11 | Erection/Fixing of totally outdoor type front openable LOOP BOX with hinged type door and locking arrangement of size 300mmx500mmx160mm (deep) fabricated out of 2mm thick MS sheet with necessary clamp including fixing 04 Nos 100Amp capacity aluminium bars, 1 No. C series 6 Amp SPMCB, drilling holes, connections, interconnections, painting with aluminium paint after applying 2 coats of approved quality primer, earthing including providing necessary water proof gasket arrangement to the box, nut & bolts etc. as required |
| 12 | Numbering of poles including abbreviated name of the BOPs etc. complete as required. |
| 13 | Add GST @18% on DSR\"22 instead of 12% ( Multiplication Factor 0.0633 on total of item Srl No. 01 to 4) |
| 14 | Labour cess @ 1 % |
