|
| 1 | Demolition Works |
| 2 | Demolition of Wall and Floor ceramic/vitrified tiles of thickness up to 10mm and shifting of malba up to all lead and lifts within municipal limits as directed by HITES. |
| 3 | Demolition of Brickwork. Disposal of debris/unserviceable material/malba by mechanical transport to approved Local Municipal Corporation dumping ground or C&D (Construction and Demolition) waste recycle plant for all lead and as directed by HITES.Note: All other charges including necessary permissions, Local Municipal Dumping ground/Recycling charges, Traffic NOC, or any other statutory charges for Dismantling, Demolition and Disposal etc. shall be borne by the Contractor. |
| 4 | Removing existing sunken portion of floor including breaking of cement concrete, and filling materials; sorting out serviceable materials and stacking within 50 m lead; and disposing of unserviceable materials to the designated dumping ground as directed by the HITES. |
| 5 | Disposal of debris/unserviceable material/malba by mechanical transport to approved Local Municipal Corporation dumping ground or C&D (Construction and Demolition) waste recycle plant for all lead.Note: All other charges including necessary permissions, Local Municipal Dumping ground/Recycling charges, Traffic NOC, or any other statutory charges for Dismantling, Demolition and Disposal etc. shall be borne by the Contractor. |
| 6 | Civil & Waterproofing Works |
| 7 | Plastering on walls: Providing and applying in one coat, 12-15mm thick plaster on internal surface of RCC / brick / block walls with polymer mix mortar, complete to true line & plumb in all levels and locations & finished rough to take on POP punning. Rate shall include for scaffolding, making grooves, sills, pattas, curing, surface preparation before the application of plaster, providing galvanized chicken mesh to a width of 150 mm at the junctions of masonry and RCC structure (column to wall, wall to beam, lintel to beam, corners of walls/columns etc. complete) including tying in position by using suitable nails / clamps / screws and as directed etc. complete at all levels. Contractor shall make good the grooves, pockets etc. after the scaffolding is removed. |
| 8 | Providing and laying in position Ready mix screed of specified grade including the cost of centering and shutteringAny work at all levels\"- GRADE M-10| layer up to 100mm |
| 9 | Providing & Laying M25 Concrete for Counter Slab & Washbasins including Shuttering and up to 10mm dia reinforcement in desired shape. thickness up to 100mm including plumbing provisions required for drainage as directed by HITES. |
| 10 | Providing and Application of 2 coats of Water proofing Chemical & rectification to be done for cracks or any leakage found during prepending with Dr. Fixit URP or equivalent approved as directed by HITES. |
| 11 | 4 inch thick Brickwork in cement mortar in 1cement:4 coarse sand complete in all respect and as directed by HITES.. |
| 12 | Sunken Refilling with light weight AAC blocks in all respect and as directed by HITES. |
| 13 | Plumbing Works |
| 14 | PLUMBING WORK-Internal CPVC and PVC pipe change: Providing and laying of CPVC (20mm) for water supply and PVC (100mm) for soil and drain including chase cutting, bends, Ts etc., and repairing of chase cutting and pressure testing for minimum 48hrs of Approved Brand and as directed by HITES. |
| 15 | Providing and fixing White Vitreous China Wash basin of approved make size 630x450 mm with a pair of 15 mm C.P. brass pillar tap auto closing type and maximum flow require 2.5lpm of approved make. The Wash Basin to be fixed with all necessary accessories inclusive of Bottle Trap , Pillar Cock, Angle Cock Etc. of approved brand including painting of fittings and brackets, cutting and making good the walls and floors where required and as directed by HITES. |
| 16 | Providing and fixing white vitreous china extended wall mounting water closet flow of size 780x370x690 mm of approved shape and make including providing & fixing white vitreous china cistern with dual flush with 2/4 litre per flush, including seat cover, and cistern fittings, brackets /Chairs etc. nuts, bolts and gasket, health faucet, Bib cock, floor drain SS jail etc. complete as directed by HITES. |
| 17 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approved make of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and directions of Engineer-in-charge with all fixtures. |
| 18 | Providing and fixing of fully automatic \"NO TOUCH\" durable & shock proof hand drier of approved make & manufacture suitable to operate on 220 volts, single phase 50 hz, A.C. power supply, 1500 Watt and directly plugged to power point complete in ABS plastic body having drying time 20-30 seconds complete as per directions of Engineer in Charge. |
| 19 | Air freshener Automatic |
| 20 | Providing and fixing and demolishing 4\" PVC pipe roof to GT hole sewer line complete in all respect and as directed by HITES. |
| 21 | Providing and fixing and demolishing 4\" PVC pipe roof to GT hole waste water line complete in all respect and as directed by HITES. |
| 22 | GT hole complete in all respect and as directed by HITES. |
| 23 | Repair and plaster work to GT hole any line complete in all respect and as directed by HITES. |
| 24 | Square folding |
| 25 | Providing and fixing ACP sheet of approved make including remove and fixing complete in all respect and as directed by HITES. |
| 26 | Providing and fixing and demolishing 1.25\" CPVC pipe roof to ground floor complete in all respect and as directed by HITES. |
| 27 | Electrical Works |
| 28 | Supply and Laying of electrical work with Switch & Socket HAVELLS FABIO MODEL as approved by HITES. Wiring for 6 ampere light point/ fan point/ exhaust fan point point with 1.5 sq.mm polycab PVC insulated copper conductor single core cable and fixing suitable size MS box and earthing the point as required and as directed by HITES. |
| 29 | Supply and Laying of electrical work with Switch & Socket HAVELLS FABIO MODEL as approved by HITES. Wiring for 16 ampere light point/ fan point/ exhaust fan point point with 1.5 sq.mm polycab PVC insulated copper conductor single core cable and fixing suitable size MS box and earthing the point as required and as directed by HITES. |
| 30 | Supply & Installation of Concealed/Surface Lights complete in all respect and as directed by HITES. |
| 31 | Supply and installation Exhaust Fan including Testing & Commissioning - Usha Crisp Air Premia CV 260mm Exhaust Fan (White) |
| 32 | Ducting for exhaust - Providing, fabricating, supplying, and installing exhaust air ducting system for washrooms complete with all accessories, supports, fittings, dampers, and insulation (if required) as per drawings, specifications, and relevant standards as directed by HITES. |
| 33 | Tile Works |
| 34 | Providing and laying Multi charged Vitrified floor/ Wall tiles in different sizes with water absorption less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Minimum Size of Tile 600x600 mm of uniform color, size, thickness, free from cracks and with straight edges and perfect corners, laid at right angles as per approved pattern over a bedding of cement mortar complete in all respect and as directed by HITES. |
| 35 | Stone Work |
| 36 | Providing and fixing 18mm thick gang saw cut mirror polished pre moulded and pre polished, machine cut for platforms, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade complete in all respect and as directed by HITES. |
| 37 | Cutting & grinding in the counter top stone for the installation of the basin as per the size & shape of the basin available as site. Additional on item 6A complete in all respect and as directed by HITES. |
| 38 | False Ceiling |
| 39 | Gypsum False ceiling False Ceiling (Amount may vary as per actual details) In 12mm gypboard incl framing, jointing, Cutting etc. as per drawing complete in all respect and as directed by HITES. |
| 40 | Doors & Partitions |
| 41 | Supply &Fixing of Urinal Partition of size 900x(450-350)x12mm In Toughened Opaque Glass of approved make complete in all respect and as directed by HITES |
| 42 | ALUMINIUM WINDOW 6*3 same as fixed as existing as per CPWD Specifications with all accessories and fittings complete and as directed by HITES |
| 43 | MIRROR 2X3 BACKLIT MIRROR: Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with frame made out of aluminium pvd coated of approved design including finishing to required shade, with 6 mm thick hard board backing complete in all respect and as directed by HITES. |
| 44 | ALUMINIUM WINDOW 3.5*3 including glazing similar to existing fixed windows and as per CPWD Specifications with all accessories and fittings glazing complete in all respect and as directed by HITES |
| 45 | Paint Works: Providing and applying 3 coats of premium emulsion paint of approved make and shade to all walls, partitions, panelling, plywood / wood / MDF surfaces etc. No cornices, grooves, pattas shall be measured separately. Only plain surface shall be considered for measurement. All works to be carried out as per manufacturer\"s specification and guidelines complete in all respect and as directed by HITES. |
| 46 | Painting of existing Door Shutters of all Wash Rooms with Melamine Polish one or more coat complete as per CPWD Specifications including providing and replacing door fixtures complete in all respect as instructed by HITES. |
| 47 | Supply, installation, testing and commissioning of Shoe shining machine - Dolphy Brand Model - DSPM0010 \"Operation: Fully AutomaticUsed for : Brown Shoes, Black ShoesIdeal for diverse types of shoes polishing, as per your distinctive requirement. Hygienic and efficient machine Material: Stainless Steel , Wooden\" |
| 48 | Supply and installation, testing and commissioning of sanitary and cp products for CMD WASHROOM- KEROVIT |
| 49 | Supply and installation, testing and commissioning of sanitary and cp products for all WASHROOMS- KEROVIT |
