|
| 1 | Removing of old unserviceable cane from wooden furniture (other than chair Varandah) and material and labour for recanning with new plastic cane 2 mm wide half round for weaving, 3-4 mm wide, 1/2 round for border complete all as specified and shown in drg. |
| 2 | Chair dining as shown in drg FD-228/279. all as per above |
| 3 | Chair writing as shown in drg FD-250. all as per above |
| 4 | Removing of the following unserviceable/broken wooden members from chair diningand S&F new one made out of first class hard wood (Indian Teak wood) including tightining of seat frame fixing of joints with fevicol/glue and bamboo pins and all as per drawing and specified & directed. |
| 5 | Front legs of chair dining showing in drg FD-228 & FD-279. |
| 6 | Rear legs of chair diningshowing in drg FD-228 & FD-279. |
| 7 | Front Rail of chair diningshowing in drg FD-228 & FD-279. |
| 8 | Rear Rail of chair diningshowing in drg FD-228 & FD-279. |
| 9 | Side Rail of chair diningshowing in drg FD-228 & FD-279. |
| 10 | Back Patti of chair diningshowing in drg FD-228 & FD-279. |
| 11 | Wooden Stiffner of chair diningshowing in drg FD-228 & FD-279. |
| 12 | Removing of the folowing unserviceable/broken wooden members from chair writing and supply and fixing new one made out of first class hard wood (Indian Teak wood) including tightining of seat frame fixing of joints with fevicol/glue and bamboo pins and all as per drawing and specified & directed and shown in drg FD-280. |
| 13 | Front legs of Chair writing shown in drg FD-280. |
| 14 | Rear legs of chair wiriting shown in drg FD-280. |
| 15 | Front rail of chair writing shown in drg FD-280. |
| 16 | Rear rail of chair writing shown in drg FD-280. |
| 17 | Side rail of chair writing shown in drg FD-280. |
| 18 | Wooden stiffnerof chair writing shown in drg FD-280. |
| 19 | Back patti of chair writing shown in drg FD-280.. |
| 20 | Arm rest of chair writing shown in drg FD-280. |
| 21 | Removing unserviceable/broken legs and S&F new leg made out of first class hard wood (Indian teak wood) for table 900 X 600 mm without drawer all as shown on drawings, as specified & directedDrg No FD-231 |
| 22 | Removing of unserviceable/broken top long rail and supply and fixing first class Hard wood (Indian teak wood) of size 65 mm X 25 mm thick to table of size 900 mm x 600 mm without drawers all as shown on drawings as specified and directed Drg No FD-231 |
| 23 | Remnoving of unserviceable/broken side short rail and supply and fixing first class Hard wood (Indian teak wood) of size 65 mm X 25 mm thick to table of size 900 mm X 600 mm without drawers all as shown on drawings as specified & directed Drg No FD-231 |
| 24 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and S&F new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beadingduly polished size 900 X 600 mm Table without drawer and shown in drg FD-231. |
| 25 | Removing the unserviceable plywood top of bed hard and supply and fix new 12 mm thick plywood top BWR grade including tightening the beds with proving 04 Nos wooden brackets to each bed complete all as specified and shown on drawing & directed Drg No FD-246 |
| 26 | Removing of unserviceable/broken long rail and supply and fixing new long rail made out of first clas Hard wood (Indian Teak wood) for bed hard ply top all as shown on drawing and specified & directed Drg No FD-246 |
| 27 | Removing of unserviceable/broken short rail and supply and fixing new short rail made out of first clas hard wood (Indian Teak wood) for bed hard ply top all as shown on drawing and specified & directed Drg No FD-246 |
| 28 | Removing of unserviceable/broken head rest and supply and fixingnew head rest complete with leg frame and teak veneered duly french polished for bed hard ply top all as shown on drawing and specified & directed. Drg No FD-246 |
| 29 | Removing of unserviceable/broken foot rest and supply and fixingnew foot rest complete with leg frame and teak veneered duly french polished for bed hard ply top all as shown on drawing and specified & directed. Drg No FD-246 |
| 30 | Removing of old unserviceable/broken Stiffner from bed plywood top and (S&F) new stiffner of first class hard wood size 40 x 60 mm all as shown on drawing and specified & directed. Drg No FD-246 |
| 31 | Removing unserviceable/broken legs and supply and fixing new leg made out of first class hard wood (Indian Teak wood) for table dining for 6/8 persons all as shown on drawings, as specified & directed Drg No FD-239 |
| 32 | Removing unserviceable/broken top long rail for table dining and supply and fixing first class hard wood (Indian teak wood) of size 100 mm X 25 mm thick for table dining 6/8 person all as shown on drawings, as specified & directedDrg No FD-239 |
| 33 | Removing of unserviceable/broken top short rail to table diing 6/8 persons and supply and fixing first class Hard wood (Indian teak wood) of size 100 mm X 25 mm thick for table dining 6/8 person all as shown on drawings, as specified and directedDrg No FD-239 |
| 34 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and S&F new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1500 X 900 mm & 1800 x 900 mm of Table dining 6/8 persons and shown in drg FD-239/273. |
| 35 | Removing unserviceable/broken legs and S&F new leg made out of first class hard wood (Indian teak wood) for table peg all as shown on drawings, as specified & directed Drg No-FD-236 |
| 36 | Removing of unserviceable/broken long top rail and supply and fixing new top rail of first class Hard wood (Indian teak wood) of size 40 mm X 19 mm thick to table pegall as shown on drawings as specified & directed Drg No-FD-236 |
| 37 | Removing of unserviceable/broken short top rail and supply and fixing new short top rail first class Hard wood (Indian teak wood) size 40 mm X 19mm thick to table peg all as shwon on drawings as specified & directed Drg No-FD-236 |
| 38 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and S&F new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 300 X 450 mm Table Peg and shown in drg FD-236. |
| 39 | Supply and fixing wooden bracket of size75 x 75 x 25 mm to various wooden furniture as directed. |
| 40 | Supply and fixing nylon buffer to various wooden furniture as directed. |
| 41 | M&L for French polishing to under mentioned furniture after removing the old polished and prepration of wooden surface by providing putty and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as directed. |
| 42 | Chair dining as shown in drg FD-228/279. |
| 43 | Chair writing as shown in drg FD-280. |
| 44 | Peg table as shown in drg FD-236. |
| 45 | Table dining 6 persons as shown in drg FD-239/273. |
| 46 | Table 3\" x2\" without drawer as shown in drg FD-231 |
| 47 | Sofa chair as shown in drg FD-373 |
| 48 | Supply and fixing 100 mm thick flexipuff / U foam cushion of 40 density of make sleepwell / comfort / kurlon,covered with new tapestary cloth (cloth as per sample) complete. All as specified and directed. |
| 49 | Locker Steel single door (FD-SK/4/95/2000/02/01) |
| 50 | Removing unserviceable steel handle and supply and fixing new steel chromium plated handle for locker steel single door all as per drawings as specified and directed and shown in drg FD-SK/4/95 2000/02/01 |
| 51 | Removing unserviceable legs of locker steel single door and supply and fixing new one made out of 16 guage MS black sheet & welding including painting with two coats of synthetic enamel paint over a coat of primer all as shown as drawings, as specified & directed and shown in drg FD-SK/4/95 2000/02/01 |
| 52 | Removing of unserviceable locks with keys and supply and fixing new MS locks of size 50 mm 6 levers with stainless steel keys in duplicate of locker steel single door all as shown on drawings, as specified and directedand shown in drgFD-SK/4/95 2000/02/01 |
| 53 | Sofa Set 5 Seater (3+1+1) FD-281 |
| 54 | Supply and fixing in replacement of front/rear leg first class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg. |
| 55 | All as per item No.12.01 here-in-before buts arms. |
| 56 | All as per item No.12.01 here-in-before buts Side rails. |
| 57 | All as per item No. 12.01 here-in-before but front & back rail of single seater sofa. |
| 58 | All as per Srl item No 12.01 here-in-before but front/back rail of sofa three seater (long seat) |
| 59 | Supply and fixing in replacement of cushion of Sofa set of drg FD-373 size to made in shape as shown on drg and directed by Engr-in-charge. |
| 60 | Charpoy GI Hard Ply Top (FD-220) |
| 61 | Dismantling & re-assembling/tightening of all members/parts of charpoy G.I. Pipe carefully including removing of unserviceable plywood and segregate the serviceable and unserviceable parts and stacking of serviceable parts complete as per directed. (Note:- Unserviceable spares will be measured and paid separately) |
| 62 | Supply and fixing new long rail of G.I. tubing 32mm bore medium grade duly threaded both ends all as specified and shown on drg and as directed. ( Make:- Jindal/TATA/Prakash (Surya) |
| 63 | Labour only short rails as made out from the unserviceable long rail parts under item No. 14.02 above including cutting and threading at the both ends and fixed in position complete all as per drg and as directed. |
| 64 | Labour only leg as made out from the unserviceable short rail under item No. 14.03 above including cutting and threading at one end and fixed in position complete as per drg and directed. |
| 65 | Supply and fixing new elbow three way of size 32 mm bore ISI mark. |
| 66 | Supply and fixing new G.I. check nut of size 6 mm thick 32 mm bore. |
| 67 | Supply only PVC Shoes for charpoy G.I. Pipe of size 32 mm bore and best quality all as per directed. |
| 68 | Removing the unserviceable plywood and supply and fixing in replacement of new plywood only of size 1980x900x12 mm thick BWR gradeall as directed. (Make of plywood:- Archidply/Centuryply/Greenply/Kitply) |
| 69 | Supply and fixing in replacement of unserviceable existing stiffener with new stiffener of length 825 mm will be welded under the plywood top of Charpoy GI pipe as approved and directed. |
| 70 | Fixing of Old serveciable plywood only after tightening of Charpoy G.I. pipe all as directed. |
| 71 | Almirah medium steel (FD-1032) |
| 72 | Supply and fixing in replacment of legs of almirah medium steel with new legs made of 1 mm thick M S sheet duly spray painted with synthetic enamel Olive Green paint two coats over a coat of red oxide primer. |
| 73 | All as per item No 14.01 here-in-before but lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed. |
| 74 | All as per item No. 14.01 here-in-before but handle mild steel CP 100 mm long for almirah large/medium steel all as directed and shown on drg. |
| 75 | Supply and fixing in replacement of shelf of almirah large/medium steel. Made of M.S. sheet 1 mm thick bend to shape and size as shown on drg. |
| 76 | Supply and fixing in replacment of unserviceable locking device with new locking device and cover of device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed. |
| 77 | Supply and fixing in replacement of door shutter of almirah medium steel, made of M.S. Sheet 1 mm thick bend to shape and size as shown on drg. |
| 78 | Spray painting to Almirah Mediium Steel with synthetic enamel Olive Green spray paint internaly and externally after removing of loose paint and providing putty after removing denting and making good of bends surfaces complete all as specified and directed. (FD-1032) |
| 79 | Spray painting to Locker Steel single door with synthetic enamel Olive Green spray paint internaly and externally after removing of loose paint and providing putty after removing denting and making good of bends surfaces complete all as specified and directed. (FD-1032) |
| 80 | Removing of unserviceable defect mirror from table dressing gents of 5.5mm thick and S&F new mirror of same size.all as shown on drg as specified and shown in drg FD-231. |
| 81 | Removing of unserviceable/chipped plastic laminated sheet 1.00 mm thick from table dressing gents and S&F new plastic laminated sheet natural teak face finish 1.0 mm thick on top, both side and drawers facing and all as shown on drawing as specified and directed and shown in drg FD-31/230. |
| 82 | Removingof unsv plywood from back side of frame table dressing gents & S&F new plywood 6mm thick commercial BWR grade all as per drg as specified and directed and shown in drg FD-31/230. |
| 83 | Removing of unserviceable/broken plywood from drawers bottom & S&F new plywood commercial BWR grade 6mm thick to the drawer of table dressing gents all as shown on drg & as specified and directed and shown in drg FD-31/230. |
| 84 | Removing of unserviceable defect mirror from table dressing ladies of 5.5 mm thick and S&F new mirror of same size.all as shown on drg as specified.( Drg : As per Trade pattern). |
| 85 | Removing of unserviceable/chipped plastic laminated sheet 1.00 mm thick from table dressing ladies and S&F new plastic laminated sheet natural teak face finish 1.0 mm thick on top, both sides and drawers facing and all as shown on drawing as specified and directed and shown in drg FD-32/251. |
| 86 | Removingof unsv plywood from back side of frame of table dressing ladies & providing new plywood 6mm thick commercial BWR grade all as per drg as specified and directed and shown in drg FD-32/251. |
| 87 | Removing of unserviceable/broken plywood from drawers bottom and S&F new plywood commercial BWR grade 6mm thick to the drawer of table dressing ladies all as shown on drg & as specified and directed and shown in drg FD-32/251. |
| 88 | Removing of unserviceable plywood and supply and fixing new plywood 3 mm thick one side teak veneer and teak wood beading all around for head rest (inand out side) of bed plywood top all as shown on drawing and specified and directed Drg No FD-246 |
| 89 | Removing of unserviceable plywood and supply and fixing new plywood 3 mm thick one side teak veneer and teak wood beading all around for foot rest (inand out side) of bed plywood top all as shown on drawing and specified and directed Drg No FD-246 |
| 90 | Removing the unserviceable plywood top of bed hard and supply and fix new 12 mm thick plywood top BWR grade including tightening the beds with proving 04 Nos wooden brackets to each bed complete all as specified and shown on drawing & directed Drg No FD-246 |
| 91 | Removing of unserviceable/broken long rail and supply and fixing new long rail made out of first clas Hard wood (Indian Teak wood) for bed hard ply top all as shown on drawing and specified & directed Drg No FD-246 |
| 92 | Removing of unserviceable/broken short rail and supply and fixing new short rail made out of first clas hard wood (Indian Teak wood) for bed hard ply top all as shown on drawing and specified & directed Drg No FD-246 |
| 93 | Removing of unserviceable/broken head rest and supply and fixingnew head rest complete with leg frame and teak veneered duly french polished for bed hard ply top all as shown on drawing and specified & directed. Drg No FD-246 |
| 94 | Removing of unserviceable/broken foot rest and supply and fixingnew foot rest complete with leg frame and teak veneered duly french polished for bed hard ply top all as shown on drawing and specified & directed. Drg No FD-246 |
| 95 | Removing of old unserviceable/broken Stiffner from bed plywood top and (S&F) new stiffner of first class hard wood size 40 x 60 mm all as shown on drawing and specified & directed. Drg No FD-246 |
| 96 | Removing the unserviceable plywood top of bed hard (MAP) and supply and fix new 12 mm thick plywood top BWR with edgeing placed in top of 25 x 25 mm supports. all as specified and shown on drawing & directed Drg No FD/E6/MAP/08 |
| 97 | Removing of unserviceable/broken pre-lamminated particle board of head rest and supply and fixingnew head rest of pre-laminated particle board of 18 mm complete.as per shown in drg. and specified & directed. Drg No FD/E6/MAP/08 |
| 98 | Removing of unserviceable/broken Foot rest and supply and fixingnew head rest complete with 18 MM PRELAMINATED PLYWOOD BWR GRADE as per shown in drg. and specified & directed. Drg No FD/E6/MAP/08 |
| 99 | Removing unserviceable/broken legs and supply and fixing new leg made out of first class hard wood (Indian Teak wood) for table dining for 6/8 persons all as shown on drawings, as specified & directed Drg No FD-239 |
| 100 | Removing unserviceable/broken top long rail for table dining and supply and fixing first class hard wood (Indian teak wood) of size 100 mm X 25 mm thick for table dining 6/8 person all as shown on drawings, as specified & directedDrg No FD-239 |
| 101 | Removing of unserviceable/broken top short rail to table diing 6/8 persons and supply and fixing first class Hard wood (Indian teak wood) of size 100 mm X 25 mm thick for table dining 6/8 person all as shown on drawings, as specified and directedDrg No FD-239 |
| 102 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and S&F new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1500 X 900 mm & 1800 x 900 mm of Table dining 6/8 persons and shown in drg FD-239. |
| 103 | Removing unserviceable/broken legs and S&F new leg made out of first class hard wood (Indian teak wood) for table peg all as shown on drawings, as specified & directed Drg No-FD-236 |
| 104 | Removing of unserviceable/broken long top rail and supply and fixing new top rail of first class Hard wood (Indian teak wood) of size 40 mm X 19 mm thick to table pegall as shown on drawings as specified & directed Drg No-FD-236 |
| 105 | Removing of unserviceable/broken short top rail and supply and fixing new short top rail first class Hard wood (Indian teak wood) size 40 mm X 19mm thick to table peg all as shwon on drawings as specified & directed Drg No-FD-236 |
| 106 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and S&F new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 300 X 450 mm Table Peg and shown in drg FD-236. |
| 107 | Removing of unserviceable/broken legs and S&F new leg made out of first class hard wood (Indian teak wood) for table centre all as shown on drawings, as specified & directed Drg No-FD-274 |
| 108 | Removing of unserviceable/broken long top rail and supply and fixing new long top rail of first class hard wood (Indian teak wood) of size 50 mm X 25 mm thick to table centreall as shown on drawings as specified & directed Drg No-FD-274 |
| 109 | Removing of unserviceable/broken short top rail and supplying and fixing new short top rail of first clas hard wood (Indian Teak wood) of size 50 mm X 25 mm thick to table centreall as shwon on drawings as specified and directed Drg No-FD-274 |
| 110 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and S&F new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 900 X 450 mm Table Centre and shown in drg FD-274. |
| 111 | Hat Stand with Mirror Removing of unserviceable/old defected mirror and S&F new mirror 5 mm thick to Hat stand includingFrench polishing complete all as shown on drg No FD 23/FD 233 asspecified by Engr-in-charge. |
| 112 | Removing of unserviceable/broken Plywood and S&FNew plywood commercial BWR Grade 4 mm to back of Hat stand complete all as shown on drg No FD 23/FD 233 asspecified by Engr-in-charge. |
| 113 | Supply and fixing wooden bracket of size75 x 75 x 25 mm to various wooden furniture as directed. |
| 114 | Supply and fixing s/s knob to various wooden furniture as directed. (As per sample) |
| 115 | Supply and fixing nylon buffer to various wooden furniture as directed. |
| 116 | M&L for French polishing to under mentioned furniture after removing the old polished and prepration of wooden surface by providing putty and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as directed. |
| 117 | Hat stand with mirror as shown in drg FD-233. |
| 118 | Peg table as shown in drg FD-236. |
| 119 | Table centre as shown in drg FD-235/29 |
| 120 | Table dressing Gents with mirror as shown in drg FD-230/31 |
| 121 | Table dressing Ladies with mirror as shown in drg FD-251/32. |
| 122 | Table dining 6 persons as shown in drg FD-239/30. |
| 123 | Sofa chair as shown in drg FD-258/281/373 |
| 124 | Supply and fixing 100 mm thick flexipuff / U foam cushion of 40 density of make sleepwell / comfort / kurlon,covered with new tapestary cloth (cloth as per sample) complete. All as specified and directed. |
| 125 | Sofa Set 5 Seater (3+1+1) FD-258 & FD-281 |
| 126 | Removing of old unserviceable foam cushions with kora cloth lining and tapestry cloth of back rest of sofa to seat 3 person and providing 32 density new polyurethane foam cushion 50 mm thick with kora cloth lining and tapestry cloth all as specified and shown in drg FD-258. |
| 127 | Removing of old unserviceable foam cushions with kora cloth lining and tapestry cloth of back rest of sofa to seat one person and providing 32 density new polyurethane foam cushion 50 mm thick with kora cloth lining and tapestry cloth all as specified and shown in drg FD-258. |
| 128 | Removing of old unserviceable foam cushion of seat with kora cloth lining and tapestry cloth for seat of 3 persons and providing new polyurethane, foam 40 density 100 mm thick with new kora cloth lining and tapestry cloth all as specified, directed and shown in drg FD-258 |
| 129 | Removing of old unserviceable foam cushion of seat with kora cloth lining and tapestry cloth for seat single person and providing new polyurethane 40 density 100 mm thick with new kora cloth lining and tapestry cloth all as specified, directed and shown in drg FD-258 |
| 130 | Almirah large/medium steel (FD-1031 and 1032 |
| 131 | Supply and fixing in replacment of legs of almirah large/medium steel with new legs made of 1 mm thick M S sheet duly spray painted with synthetic enamel Olive Green paint two coats over a coat of red oxide primer. |
| 132 | All as per item No 29.01 here-in-before but lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed. |
| 133 | All as per item No. 29.01 here-in-before but handle mild steel CP 100 mm long for almirah large/medium steel all as directed and shown on drg. |
| 134 | Supply and fixing in replacement of shelf of almirah large/medium steel. Made of M.S. sheet 1 mm thick bend to shape and size as shown on drg. |
| 135 | Supply and fixing in replacment of unserviceable locking device with new locking device and cover of device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed. |
| 136 | All as per Srl. Item No.29.05 here-in-before but almirah large Steel. |
| 137 | Supply and fixing in replacement of door shutter of almirah medium steel, made of M.S. Sheet 1 mm thick bend to shape and size as shown on drg. |
| 138 | All as per Srl. Item No.29.07 here-in-before but almirah large Steel. |
| 139 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 11,794.50.00 (Minus) as listed in Schedule of Credit.Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\" |
