|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means overareas (exceeding 30 cm indepth, 1.5 min width as well as 10 sqm on plan) including gettingoutand disposal of excavated earth lead D.S.R 2.6.1 |
| 2 | 1:4:8 (1Cement 4 coarse sand (zone-III) denved from naturalsources 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 (2023) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derivedfrom natural sources) DSR 5.1.2 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1 |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.3 |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fromnatural sources) DSR 5.2.2 |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1cement : 4 coarse sand) DSR 6.4.1 |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fromnatural sources). DSR 5.3 |
| 9 | Mild steel iron in plain work such as in reinforced concrete or reinforce brick work wrought to required shape as necessary cutting. bending for proper completion of the work and including supply of steel its wastage bend hook sand authorised over lapping shall be measured required to proper completion of thework S.I.No. 504 |
| 10 | Excavating, supplying, stacking and filling of localearth (including royalty) by mechanical transportupto a lead of 5km also including ramming and watering of the earth in layers note exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR 2.25A |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal sizestone aggregate DSR 11.3. |
| 12 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR13.4.1 |
| 13 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR13.5.1 |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete. DSR 13.80 (2023) |
| 15 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR 13.41.1 |
| 16 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 13.47.1 |
| 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sgm including pointing the joints with white cement and matching pigment etc., complete. DSR 11.37 |
| 18 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement oncrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). DSR 10.13.1 |
| 19 | Approximate cost of oxidised iron fitting ISI Marked only.materials Chaperter 01 (SI No.16) |
| 20 | (A) I.S.I Marked Oxidised Iron Tower bolt - |
| 21 | 09 mm dia 300 mm long (D) |
| 22 | (B) I.S.I Marked Alluminium Iron Sliding bolt - |
| 23 | 16 mm dia 300 mm long (D) |
| 24 | (C) I.S.I Marked Oxidised Iron Door handle - |
| 25 | 10 mm dia 150 mm long (D) |
| 26 | (D) MISL .FITTINGS |
| 27 | I.S.I marked iron Hings 100 mm long (D) |
| 28 | Iron screws 25 mm |
| 29 | Iron screws 30 mm |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 |
| 31 | Supply and fixing of anodizod alumium door having 5 mm thick aluminum section excluding coating and an averge coating of 20 micron fully glazed made of aluminum door tube size 83.5 x44.65 m as vertical member and 1140 x 44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminum tublar vertical with two open able shutter, the rate will including cost of material fixtures 4 mm glass handles locks screw necessary bendign and excluding cost of floor spring if required for proper completion of the work. as per direction of Engineer in charge |
| 32 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid D.S.R No17.2.1 |
| 33 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.D.S.R No-17.24 |
| 34 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Long pattern W.C. pan of size 580 mm D.S.RNo-17.13.1 |
| 35 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450 mm D.S.R No-17.25.1 |
| 36 | Provision of 25 mm dia. P.V.C. pipe. |
| 37 | Provision of Soakpit with all respect complete |
| 38 | Provission of Sumersebul+Pipe of with all respect complete. |
| 39 | Provission of Electrificatoion of with all respect complete. Please Enable Macros to View BoQ information |
