|
| 1 | Comprehensive, preventive and periodical maintenance of lifts/elevators installed in AHRR Complex as mentioned here-in-after, in reliable, safe and efficient manner using latest techniques & expertise consultancyby regularly examining, lubricating and adjusting the mechanical and electrical driving equipment, including replacement of unserviceable component such as governor sleeve, shaft assembly, bearing / contact,governor jaws, car & hall mechanical buttons,car & hall position indicators, car direction indicators and all other car and landing signal / fixtures, deflectors, counter weight, guide rails, buffers, machines motors, generators, door ropes, ARD system, PCBs, belts, rollers, gears, bearings, solenoids, coils, chock brake shoes, liners, contactors, relays, coils, pushbuttons, door operator VVF drive, VVVF main drive, cardoor safety device, limit switches, governor, hoistway door locks, indicators and other mechanical and electrical parts (excpet car cabin, landing door, sheave rim and Srl item No 02 to 20 of Sch \"A\") for smooth functioning of elevators and incl all machine works i.e. welding, cutting, drilling, screwing, etc.as and when required, to entire satisfaction of Engineer-in-charge, including cost of materials complete including Sunday & Holiday, complete all as specified & directed for following Lift(s) / Elevator(s) - |
| 2 | Electric Hospital passenger cum stretcherelevator /lifts of capacity 26 passenger serving (G+4) 5 floors installed at D Block lift No 02 & 03-02 Nos lifts. |
| 3 | Electric Hospital passenger cum stretcher elevator /lifts of capacity 20 passenger serving (B+G+4) 6 floors installed at E-Block-01 Nos lifts |
| 4 | Electric Hospital passenger cum stretcher elevator /lifts of capacity 08 passenger serving (G+5) 6 floors installed at P18 -01 No, P19 - 01 No -02 Nos lifts |
| 5 | Notes for item No. 1.00 to 1.03: 1. This contractis \"All in All\" contract where OMEGA will bear thecost of repair / replacement of any of the worn out part without any additional charges. 2. Cabin Interior, Battery is not covered in AMC and replacement will be paid under relevent Item(i) The above maintenance shall be done through OEM of existing lifts.Please also refer Sch \"A\" Notes.(ii) The contractor shall have to submit MOU from OEM M/S Omega Elevators (srl Item No 1.01 to 1.03)(iii) The rates quoted shall be inclusive of T&P required for carrying out repairs, stationary for maintenance of recordall as specified.(iv) All the cleaning items (Dusting cloths, floor/Glass cleaner, SS steel cleaner, broom etc) shall be provided by the contractor and rates deemed to be included in the quoted rate. Otherwise a penalty of Rs. 100/- per day will be charged.(v)Any items not covered in Sch \"A\" (excpet car cabin, landing door, sheave rim and Srl item No 02 to 20 of Sch \"A\") shall be deemed to be included in the unit rate quoted for above items for the smooth functioning of lifts and the contractor may quote the rate accordingly. Contractor is expected to inspect the lift before quoting the rate and Lifts will be handed over in the same condition. No claim will be admissible thereof. |
| 6 | Notes for item No. 1.00 to 1.07 (contd.):-(vi)Contractor shall be attending complaints round the clock i.e. 24 hrs. If contractor is not able to rectify the complaint, penalty shall be charged as given below:-(a)up to 1st day- NIL(b)2nd day- Rs 1000/- day(c)Subsequency for every days - Rs 2000/day.(vii) Contractor shall be responsible to register the day to day complaints of lifts and addressed the same with in the stipulated timeframe and the complaint registerwill be putup to the JE / Engr-in-charge on daily basis. (viii) The comprehensive / preventive / periodical maint incl six routine maintenance visits for oiling and greasing and three visits of special lift safety inspection(ix) Contractor shall submit safety security certificate of lifts from OEM in every month as per performa mentioned in tender documents.(x) Adequate arrangements shall be made to dewatering the lift pit as and when water accumulates. Cost Should be included in the quoted rate. Otherwise penality of Rs 500 per day per lift will be recovered from the contractor.(xi) Contractor shall be responsible to update the imp tele number and safety precautions of inside the car cabin of each lifts and update the same time to time. |
| 7 | Supply & fix in replacement ofmaintenance free Battery, 12 V 7AH complete all as specified & directed. |
| 8 | Supply & fix in repair of 1350 Rpm Car Fan/bloweras per existing type complete all as specified & directed. |
| 9 | Supply & fix in replacementtravelling cable multistranded copper conductor of size 12 core 0.5 sqmm all as directed by Engr-in-Charge. |
| 10 | S&f in replacementcopper cable 1.5 Sqmm single core, 1100V PVC round sheathed flexible type complete all as directed. |
| 11 | S&F in replacement RCCB in sheet metal enclosure 40 Amps, 300mA, four pole, 415 Volts complete all as directed. |
| 12 | S&F in repair MCCB 4 pole 63 A 16 kA in sheet metal enclosure fix to wall complete all as directed. |
| 13 | S&F in replacement MCB SP 6 to 16 Ampscomplete all as directed. |
| 14 | S&F in replacement MCB TPN 63 Ampscomplete all as directed. |
| 15 | Supply and fix in repair, Metallic body exhaust fan of 350/380 mm sweep, single phase including winding of motor and necessary addn/altn to accommodate at the existing location or making provision by cutting/chasing wall and making good the disturbed surfaces, matching with the existing colour of wall all as directed by Engr-in-Charge. |
| 16 | Supply & fix in repair as in shaft light of lift environmental friendly, ultra modren, energy saving LED bulk head 10W IP 65 in die cast aluminium housing & frosted glass with all connection incl wiring all as per site requirement complete all as specified and directed. |
| 17 | S&F in repair decorative ultra slim linear LED 4\" long (18 W) lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack complete with connecting up with threecore twisted flexible copper conductor cable up to main connection all as per site requirement. |
| 18 | S&F in replacement 07 W ultra slim decorative aluminium casted, recess mounted round/square fixture (as per existing size and type) in white finish with opal diffuser and electronic driver, suitable for low depth ceiling of lift complete all as per site requirement directed by Engr-in-Charge. Make : Surya/Havells/Bajaj |
| 19 | Material and labour for removal of dust, stain marks, scratches, on stainless steel surface of car cabin including ceiling and carry out scrubbing, polishing, buffing of stainless steel polish liquid and buffing tool to give glossy and clean finish to lift cabin surface oflift complete all as specified and as directed. |
| 20 | Material and labour for removal of dust, stain marks, scratches, on stainless steel surface of landing door including landing frame and carry out scrubbing, polishing, buffing of stainless steel polish liquid and buffing toolto give glossy and clean finish to lift cabin surface of lift complete all as specified and as directed. |
| 21 | M&L for replacement of landing sill of complete all as specified and as directed. |
| 22 | Dismantling/taking down old unserviceable landing door and supply, fixing, testing, commissioning of complete landing door SS hairline finish metal sheet (18 Gauge approx) SS 304 and scratch resistant as per existing size and model including complete door header assembly i.e door hander roller and landing sill for smooth opening of landing door suitable for 20/26 passanger cum stretcher lift with 2 hours fire rating, with gate lock, door shoe and other fittings as per site requirement complete all as specified and directed by Engr-in-Charge (Make: As per OEM recommendation) Note: (i) rate quoted by contractor are deemed to be inclusive of minor spares such as gate lock, door roller, door shoe, door rope etc and any other civil work required at site for taking down old door assembly and fixing new one and making good disturbed surfaces complete as per direction.(ii) Any damage done by contractor shall be replaced with same make and model of the door sensor while taking down and rectify the same free of cost by contractor. |
| 23 | Dismantling/taking down old unserviceable car door and supply, fixing, testing, commissioningof complete car door SS hairline finish metal sheet (18 Gauge approx) SS 304 and scratch resistant as per existing size and model including complete door operator assembly for smooth opening of car doors suitable for 20/26 passanger cum stretcher lift with 2 hours fire rating, with gate lock, door shoeand other fittings as per site requirement complete all as specified and directed by Engr-in-Charge (Make: As per OEM recommendation) Note: (i) rate quoted by contractor are deemed to be inclusive of minor spares such as gate lock, door roller, door shoe, door rope etc and any other civil work required at site for taking down old door assembly and fixing new one and making good disturbed surfaces complete as per direction.(ii) Any damage done by contractor shall be replaced with same make and model of the door sensor while taking down and rectify the same free of cost by contractor. |
| 24 | S&F in replacement of floor matt of car cabin of 08 passanger lift existing size and make complete all as specified and as directed. |
| 25 | S&F in replacement of mirror of car cabin of 08 passanger lift existing size and makecomplete all as specified and as directed. |
