|
| 1 | Excavation in trenches, for laying of pipe line not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 2 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed. |
| 3 | Removing excavated material in soft/ loose soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting pointcomplete all as specified and directed. |
| 4 | M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 60 cm in depth for passing of GI/CI pipes all as specified and directed . Note : Making good with PCC shall be measured and paid separetely under respective item. |
| 5 | M&L for cement concrete(1;2;4) type B-0 using 12.50 mm graded granite stone aggregate for repairing to disturded surfaces complete all as directed. |
| 6 | Disconnecting and taking down cast iron water mains 150 mm bore (including all fittings) with spigot and socket ends and lead joints, including burning out joints and recovering lead complete all as specified and as directed. |
| 7 | All as per Item No 06 above but 100 mm bore |
| 8 | All as per Item No 06 above but 80 mm bore |
| 9 | M&L for cast iron pipes in replacement 150 mm bore with spigot and socket end centrifugally cast , class LA, ISI marked in any length laid in trenches including rubber gaskets and insulation material complete all as specified and directed. |
| 10 | All as per Item No 09 above but 100 mm bore |
| 11 | All as per Item No 09 above but 80 mm bore |
| 12 | M&L for replacement of cast iron special fittings such as bends (any type, radius and angle) tapers any type, (straight bend, increasing, decreasing or double socket etc) Tee pieces single branch.Y junction double branch cross (all sockets or socket and spigot) collers, caps and plugs for upto 150 mm bore in mm all as specified and directed |
| 13 | M&L for replacement ofconnecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth for upto 150 mm bore all as specified and as directed |
| 14 | M&L for replacement of gland packing of sluice valveof suitable size 80 mm to 200 mm bore including nut ,bolt and washer complete. |
| 15 | Material & Labour to repair leakages through lead joints from existing CI pipe, fittings, tee, bends tail pieces, connecting pieces etc by using previously usedand additionalrun lead , spun yarn including caulking to make the joints water tight including excavation works as required complete all as specified and directed for the following bore pipe line :- 200 mm bore pipe |
| 16 | All as per Ser Item No 15.00 above but 150 mm bore pipe |
| 17 | All as per Ser Item No 15.00 above but 100 mm bore pipe |
| 18 | All as per Ser Item No 15.00 above but 80 mm bore pipe |
| 19 | Taking up/ down of following bores of steel tubing and connections from excavated trenches and building up to tripple storey with due care from site complete all as specified and directed :- 15 mm nominal bore |
| 20 | All as per Ser Item No 19.00 above but 20 mm nominal bore |
| 21 | All as per Ser Item No 19.00 above but 25 mm nominal bore |
| 22 | All as per Ser Item No 19.00 above but 40 mm nominal bore |
| 23 | All as per Ser Item No 19.00 above but 50 mm nominal bore |
| 24 | Supply & Fixing for replacement of following bore of GI tube medium grade/ ISI marked complete with all fittings (such as bends, elow, tees, connectors, caps, plugs, unions etc) including cutting, screwing as required and fixed to wall or roof or laid on floor or in trenches including fixing wall hooks,cutting through wall, floors etc and making good the disturbed surface with cement mrtar 1:3 after fixing the tubes complete all as specified and directed :- 15 mm nominal bore |
| 25 | All as per Ser Item No 24.00 above but 20 mm nominal bore |
| 26 | All as per Ser Item No 24.00 above but 40 mm nominal bore |
| 27 | Re-fixingold steel tubingand connection in new or oldposition in trenches/wall/ ceiling/ floors etc with using all new fittings complete including making good the disturbed portion as per existing pattern (PCC, road, path etc) as directed of sizes15mm bore |
| 28 | All as per item No 27.00 but size 20mm bore |
| 29 | All as per item No 27.00 but size 25mm bore |
| 30 | All as per item No 27.00 but size 40mm bore |
| 31 | All as per item No 27.00 but size 50mm bore |
| 32 | Supply and replacement of Bib tap 15 mm size ISI markedstandard of PTMThigh pressure screwed for iron pipes and fixed. |
| 33 | Testing of drinking water for chemical analysisas per IS 10500. 2012 guideline after lifting the sample from Pump as per testingguidline enumerated intestPhysical Parameter (PH Value,Turbidity,colour,odour) Chemical Parameter (Ammonia free & saline, Ammonia Albuminoid,O2 absorbed, Nitrates, chlorides,Hardness temp & Permanent ,TDS, Metal Iron ,Manganease,Zinc,Calcium ,Magnesium ,Sulphate ,Phenolic Substances)all as directed by Engr-in-Charge. |
| 34 | S&F in replacement microprocessor based digital electronic water level indicator without using any conductive sensor having following features:-(a) Indicator suitable for 1 km distance Range.(b) No cable is needed for communication between tank house in digital indicator.(C)Big seven segment red LED display visible from long distance.(d) Microprocessor based latest technology PCB.(e) very low power consumption.(f) having no any moving mechanical parts.(g) Level can be measured in liters, Kiloltrs or % etc.(h) Size of letter not less than 50-55 mm. Note:- (i) The cost of necessary additional transmitter/ repeater/ other requisite components/ materials/ PCC work etc. shall be included in the quoted rate. |
| 35 | Supply, fixing, connecting MS column pipe of 150 mm nominal dia having wall thickness not less than 7.0 mm in 3.0 Mtr length, coupled/threaded and welded with MS Flange of 12 mm thick on both end with supporting ribs (4 Nos.) including jointing with rubber or fiber board gasket with all nuts, bolts and washer set and making edge cutting for passing the submersible cable complete in all respect and directed. |
| 36 | Supply and fix in replacement ofair release valve flanged type 150 mm dia complete withfittings all as required and directed at site. |
| 37 | Material and Labour for brick masonry valve pit chamber of size 1200mm x 1200mm x 1200 mm (internal) complete with PCC (1:3:6) type C-2 for foundation, brick work in Cement Mortar (1:6), 15 mm thick plastering in Cement Mortar (1:4) (internally) including 6.0 mm thick MS plate covering and angle iron frame of suitable size for covering plate including coping, 100 mm thick, PCC flooring in 1:2:4 type B-1 and two coats of synthetic enamel paint over a coat of red oxide primer includingpreparation of surfaces with locking arrangement complete all as specified and directed. |
| 38 | All as per item No 37.00 above for valve pit of size 1000mm x 1000mm x 1000 mm (internal). |
| 39 | All as per item No 37.00 above but for valve pit of size 800mm x 800mm x 800 mm (internal). |
| 40 | Routinemaintenanceof chloronomeplant (Granuals based dosing plant) as specified by Engg-incharge which includethe following :-(ii) Cleaning of plant room once in a daily.(ii) Daily Checking of Chlorination plants /testing of complete system for serviceability of plant.(iii) Routine maintenance and servicing of Agitator by using necessary lubricant,replacement of bush/bearingall as directed.Note :If any defect is found in plant, contractor should rectify the defect within 24 Hrs, if failed to rectify the decfectthe contractor shall be liable to pay compensationRs 500/- (Rupees five hundred only) per plant per day. |
| 41 | S&FGear motor as per existing 230 volt, 50 Hz complete all as specified and directed. |
| 42 | S&FRotor assemblyas per existing model complete all as specified and directed. |
| 43 | S&FDosing tank as per existing size complete all as specified and directed. |
| 44 | S&FInjection check valve 3/8\" size.as per existing model complete all as specified and directed. |
| 45 | S&FWeighted suction line strainer3/8\" size as per existing model complete all as specified and directed. |
| 46 | S&FAgitator Shaftwith impeller madepoly propylene rigid 32 mm dia and 500 mm length complete as per existing model complete all as specified and directed. |
| 47 | S&F Check valve duck bill as per existing model complete all as specified and directed. |
| 48 | S&F ofPVC Tubingsuction /discharge line 3/8\" size heavy dutyas per sample complete all as specified and directed.. |
| 49 | M&L for replacement ofHead of dosing pump with accessories including Connecting Nuts, and Ferrules all as directed. |
| 50 | M&L for replacement of agitator motor of capacity 120 watts, 920 RPM single phase 230 V withimpeller Shaftmadepoly propylene rigid 32 mm dia and 500 mm length and blade complete all as directed. |
| 51 | M & L for rewinding of agitator motor of capacity 120 watts, 960 RPM single phase 230 V and using copper winding wire of existing gauge with necessary insulation material including testing after repair and refixing of the same complete all as directed. |
| 52 | Taking out the defective submersible pump set of 20000 GPH capacity with 30/40/41 HP motor from bore well with column pipe rope cable and other accessories etc anddepositing aswhere directed |
| 53 | Lowering submersible pump set of 30/40/41 HP with three phase electric motor suspended including column pipe of 3.0 metre each or to replace the worn out column pipe to avoid any leakage in boreby unscrewing the nut & bolts at flange joints, steel rope , submersible cable and lowering , commissioning the same after rectification complete all as specified and directed. |
| 54 | Repair and rewinding of submersiable pump setof capacity 30/40/41HP with PVC insulated /coated copper winding wire of existing gauge with other winding material including rewinding of motor, repalcement of insulating paper sleeves bamboo sticks etc as per starnadrad manufacturer specificationincluding cleaning of starter slots and replacement of defective partsand testing complete all as specified and directed by Engr- In - Charge |
| 55 | Dismantling of pump and motor set complete cleaning all dismentalled spare/parts /winding for inspection of Engg in charge to acrtainthe scope of works for repair and replacements |
| 56 | Machining work required for repair to submirsible pump set by straightening, polishing of pump shaft. Making screw and key way, including replacement of wornout parts re-assembling pump after repair for smooth functioning of pump. Note:- Fixing payment shall be deemed to be including in quoted rates. |
| 57 | Supply only components/spare parts of existing discription and make for the submersible pumps and motors of capacity as under :-SS impellers with Key and distance bushes suitable for 20000 GPH |
| 58 | All as per Ser Item No 57.00 above NRV for submersible pump set 20000GHP |
| 59 | All as per Ser Item No 57.00 above Thrust Bearingfor submersible pump for 20000 GPH |
| 60 | All as per Ser Item No 57.00 above Neck ring submersible pump set 20000 GPH |
| 61 | All as per Ser Item No 57.00 above Distance sleeves for 20000GPH |
| 62 | All as per Ser Item No 57.00 above High tensile nut bolts suitable for 20000 GPH pump. |
| 63 | All as per Ser Item No 57.00 above GM motor bush upper and lower (set of two) |
| 64 | All as per Ser Item No 57.00 above Rotor bearing sleeve upper and lower |
| 65 | All as per Ser Item No 57.00 above Coupling with key for motor pump |
| 66 | All as per Ser Item No 57.00 above Sand Guard for submersible pump set |
| 67 | All as per Ser Item No 57.00 above Housing upper & lower |
| 68 | Supply & Fixingin replacement ML - 3 Type three Pole Power contactor conforming to IS:13947-4-1/IEC:60947-4-1 having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage240 /415 Volt, 50 Hz AC 3 rating 70 A, ACI Rating 100Acomplete all as specified. |
| 69 | Supply of water pressure gauge, 100 mm dial size of range 0 to 7.0 Kg/Cm2,Accuracy ± 2%with pressuge gauge cock complete all as specified and directed. |
| 70 | S&F in replacement Single phase preventer VSP 3 auto reset 50 Volts unbalanced type complete all as specified and directed. |
| 71 | M&L fordisconnecting and stopping of incoming and outgoing pipes of RCC over head tank ofcapacity 1,00,000 gallon by means of hassen clothe to avoid choking of distribution pipe lines,removing total water ,frame the over head tank,cleaningtankcomplete with steel brush,removing complete settled dirt /sand/silt and flushing the complete tank through wash out pipes,cleaning of pipes(Rising, delivery wash out ,over flow pipes),Sluice valve of any size including painting after cleaning surface of pipes with existing shade of synthetic enamel paint and date of cleaning shall also be mentioned on over head tank of pillar with synthetic enamel paint, including removing bee hives from OH Tank if present as directed by Engr-in-Charge at site complete all as specified and directed Note:- (a) The work shall be carried out through trained staff with hygiene and safety equipment.(b) Responsibility for insurance and safety of team will solely rest with the contractor. |
| 72 | All as per serial item No 71.00 above but 75000 gallon capacity |
| 73 | S & Fin replacement Digital AC Volt meter ( 0 to 500/600 Volt) , square size, flush mounted case, complete all as specified and directed. |
| 74 | S & Fin replacement Digital AC Ammeter ( 0 to 200 Amp ), CT Operated - 5 Amps,square type,flush mounted case,complete all as specified and directed . |
| 75 | Supply & Fixed in replacement Gun metal Gate valve with iron wheel head conforming to IS : 778/ 1984, Class-1, Screwed both end as per IS: 554 Parallel, ISI marked including taking out the worn out/ old GI gate valve complete all as specified and directed suitable for 50mm Dia bore |
| 76 | All as per item No 75.00but size 40mmbore. |
| 77 | All as per item No 75.00but size 25 mmbore. |
| 78 | All as per item No 75.00but size 20mmbore. |
| 79 | Supply & fix in replacement of cast iron non-return valve 150 mm dia ISI marked with CML Noincluding nut, bolt, washer and rubber packing complete all as specified. |
| 80 | Supply & Feeding/Dissolvingcalcium Hypo chlorite having 65% to 70% chlorine content Granular Chlorination Chemical (Water Treatment Chemical ), free flowing granular material free of foreign matter in 45 Kg in sealed packing complete all as specified and directed.Note : Feeding of calcium Hypo chlorite granules to dozer pump should be done on daily basis in limited amountas specified by Engg-in-charge. |
| 81 | M&L for replacement ofDosing PumpHigh Pressure Single Head Gear Motored Adjustable dosing pump with accessories including Lead Tubing, Connecting Nuts, Injection Check Valve,Clay Weight, and Ferrules all as directed. |
| 82 | Routine/periodical cleaning the inside area of pump area including cutting/removal of uprooting of unwanted grass,bushes and small trees near all around sub station and pump house complex complete including surface dressing and levelling by surface excavation complete all as directed. |
| 83 | M&L for painting of CI/MS pipe line with existing colour by means of scafolding of following sizes :-200 mm dia |
| 84 | All as per Serial item No 83.00 above but 150 mm dia |
| 85 | S&Fin replacement offlat PVC Insulated & Sheathed IndustrialSubmersible Cable with Bare Bunched Copper Conductor for Submersible Pump Motors with Voltage Grade 1100 Volts generally conforming to IS 694/1990. of size 16 Sqmm x 3 core including connecting both end with proper size of copper lugs duly crimped with die press crimping device complete all as specified and directed by GE (I). |
| 86 | Supply and fiixing LED Aviation obstruction light Die-cast aluminum housing with Red polycarbonate dome having IP -65, 240 V, 20/25 watt for Overhead Water storage tank or reservoir over the height of 1.5 mtr above the top of Tank including with fixing arrangement complete all as specified and as directed. |
| 87 | S&F in repair weather proof service wire,single stranded copper conductor 1100 voltsize 6 Sqmm 2 core on surface for aviation light on OH tank by means of clips/saddling complete all as specified and directed. |
| 88 | Supply and fix in replacement/ installation and testing of cast iron sluice valve,heavy duty class-I, ISI marked, conforming to I S 14846, long body type, pressure type PN-1.6,flanged ends and drilled having brass steel spindle with iron head wheel at the top complete with and including nuts, bolts, washer, rubber gasket and jointing complete all as specified and directed of following sizes :- 80mm bore |
| 89 | All as per Serial Item No 88.00 above but 100mm bore |
| 90 | All as per Serial Item No 88.00 above but 150mm bore |
| 91 | All as per Serial Item No 88.00 above but 200mm bore |
| 92 | S&F in repair retro reflective installation board made out of acrylic sheet, size 1.5 x 1.2 Mtr.0.5mm thick writing with computer graphic marking, size of letter not more than 100 mm in length with approved white letter writing on blue back and border of 15mm all around including necessary grouting the installation board with PCC 1:2:4 type B-1 (using 20mm graded stone aggregate)to the ground with angle iron of size 40x40x6mm complete with necessary frame work, welding, bending etc including painting with two coats of synthetic enamel paint over one coat of red oxide primer on exposed MS work complete all as specified and as directed. |
| 93 | S&F in repair for construction offire fighting post of height 3.5 feet x length 6 feet x width 3 feet having arrangement for hanging fire bucketsmade out of MS angle iron 40 x 40 x 6 mm and 2mm thick MS sheet cover duly painted with two coats of synthetic enamel paint over one coat of red oxide primer including bucket made out of MS sheet of capacity 9 ltr with carrying handle at bottom of the bucket each for fire fighting point duly painted with two coats of synthetic enamel paint over one coat of red oxide primer complete and construction of PCC foundation in PCC 1:2:4 type B-1 including earth work for fire fighting to be prepared as per direction. |
| 94 | Supply and installation in repair wooden made duly painted first aid box in built size 300x300x150mm hanging and locking arrangement with all necessary first aid medicines materials such as cotton, band aid, dettol, burnol etc. complete all as specified and directed. |
