|
| 1 | Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth: for foundation etc or for manholes, laying of pipe lines,cables,pipes etcin any type of soil and getting out complete all as specified and directed by EIC. |
| 2 | Returning filling in, including spreading, leveling watering & well rammng in layers not exc 25 cm thick complete all as specified and directed by EIC. |
| 3 | Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & diected. |
| 4 | Taking out existing CI/DI pipe line, of any class including CI fitting with spigot andsocket ends and lead joint including burning out lead joints recover in lead and to be relaying after cleaning / insertion of new CI pipes/CI fittings of any class/type of follwing sizes in safe condition for the following sizes :- |
| 5 | (a) 80mm bore |
| 6 | (b) 100 mmbore |
| 7 | (c )150 mm bore |
| 8 | (d) 200 mm bore |
| 9 | (e) 250mm bore |
| 10 | Refixing CI pipe including fittings with spigot and socketed end/ flanged end,centrifugally cast laid in trenches after cleaning internally and externally, drawing out forigen material/rust complete up to satisfaction of Engr in Charge of following sizes with and including new titon joint for fixing of pipe :- Note :- (i)Earth work , joints and CI Specials/fittings of the pipes shall be measured andpaid separately under appropriate item. |
| 11 | (a) 80mm bore |
| 12 | (b) 100 mmbore |
| 13 | (c )150 mm bore |
| 14 | (d) 200 mm bore |
| 15 | (e) 250mm bore |
| 16 | Supply , laying and jointingDI ironpipes S/S class K 9 of standard length , internal cement mortar coating an external surface with bituminious paint of the following sizes ISImarked including nut bolt, packing material etc and making the joint leak proof complete all as specified and directed. Note : - (i)Earth work, joint and CI/DI specials/fittings of the pipes shall be measured and paid for separately under appropriate items of Schedule. |
| 17 | (a) 100 mmbore |
| 18 | (b )150 mm bore |
| 19 | (c) 200 mm bore |
| 20 | (d) 250mm bore |
| 21 | S&F push on flexible rubber gasket (Tyton) joint suitable for following sizes :- |
| 22 | (a)80 mm bore |
| 23 | (b)100 mm bore |
| 24 | (c)150 mm bore |
| 25 | (d) 200 mm bore |
| 26 | (e) 250mm bore |
| 27 | Cutting of cast iron pipes in position for insertion of new tees , branches, etc for the following sizes complete all as specified and directed :- |
| 28 | (a) 80mm bore |
| 29 | (b)100 mmbore |
| 30 | (c )150 mm bore |
| 31 | (d) 200 mm bore |
| 32 | (e) 250mm bore |
| 33 | S & F for CI/ DIfittings i.e bend (any type, radius and angle) tapers any type, (straight bend including decreasing or double socket etc) Tee pieces single branch,\"Y\" junction, (all sockets or socket and spigot or flanged) collars, caps and plugs.for spigot socketed pipesOfupto 250vmmsize. |
| 34 | M&L for run lead joint for spigot and socketed end CI pipe & fittingscomplete all as specified incl excavation, returning & refilling and directed by Engr in charge for following :- |
| 35 | (a)80 mm bore |
| 36 | (b) 100 mm bore |
| 37 | (c )150mm bore |
| 38 | (d) 200mm bore |
| 39 | (e) 250 mm bore |
| 40 | M&L for cocking of run lead joint for spigot and socketed pipes and fittingscompleteincl excavation, returning & refilling, all as specified and directed of following sizes :- |
| 41 | (a) 80mm bore |
| 42 | (b)100 mmbore |
| 43 | (c )150 mm bore |
| 44 | (d) 200 mm bore |
| 45 | (e) 250mm bore |
| 46 | Taking out,sluice valve top cover, repiaring of unserviceable spindle and unserviceable check nut by grinding, machining and putting extra material including complete lathe work and refixing of sluice valve parts after servicingincluding replacment of gland packing, rubber sheet, nut, bolt,Spindle ,check nut and washer of existing size complete all as specified and directed, of following size:- |
| 47 | (a) 80 mm bore |
| 48 | (b) 100 mm bore |
| 49 | (c )150mm bore |
| 50 | (d) 200mm bore |
| 51 | (e) 250 mm bore |
| 52 | Taking out old UNSV Sluice valve & Supply and fix cast iron flanged sluice valve of class 1.6 PN, long body, ISI marked, conf to IS-14846 with stainless steelspindle and hand wheel including nut bolts, rubber gasket complete for installation of valve all as specified and directed by EIC of following size: |
| 53 | (a) 80mm dia |
| 54 | (b)100 mmbore |
| 55 | (c) 150 mm bore |
| 56 | (d) 200mm bore |
| 57 | (e) 250mm bore |
| 58 | Taking up or down (from wall/trenches/floor) existing GI steel tubingand connections, including cleaning for refixing or removal to storeof following sizes:- |
| 59 | (a) 80 mm bore |
| 60 | (b) 50 mm bore |
| 61 | (c) 40 mm bore |
| 62 | (d )25 mm bore |
| 63 | (e)20 mm bore |
| 64 | (f) 15 mm bore |
| 65 | Refixing of old steel tubing and connections in new or old positionincludingcleaning internally and externally, any grade/make in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc allas specified and directed offollwing size:- |
| 66 | (a) 80 mm bore |
| 67 | (b) 50 mm bore |
| 68 | (c) 40 mm bore |
| 69 | (d )25 mm bore |
| 70 | (e)20 mm bore |
| 71 | (f) 15 mm bore |
| 72 | S&F & laying only GI tubing medium grade ISI Marked with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittingsfor laid in trenches/wall/ceiling/ floor/all as specified and directed of following size. |
| 73 | (a)50 mm bore |
| 74 | (b) 40 mm bore |
| 75 | (c) 25 mm bore |
| 76 | (d)20 mm bore |
| 77 | (e) 15 mm bore |
| 78 | Drilling and taping cast iron water mains (in position) for branch connections forfollowing size |
| 79 | (a) 15mm |
| 80 | (b) 20 mm |
| 81 | Taking out UNSV Gun metal globe & S&F Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new positionfor following size: |
| 82 | (a)50 mm bore |
| 83 | (b)40 mm bore |
| 84 | (c)25 mm bore |
| 85 | (d) 20 mm bore |
| 86 | (e) 15 mm bore |
| 87 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight210 gms) complete all as specified and directed. |
| 88 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight455 gms) complete all as specified and directed. |
| 89 | M&L for replacment of stainless steel splindlewith check nut of existing type & size, includingopening, grinding , threading , machning ofgun metalgate, replacement of nut, bolt and washer including rubber sheet complete all as specified & directed for following sizes :- |
| 90 | (a) 80 mm |
| 91 | (b) 100 mm |
| 92 | (c) 150mm |
| 93 | (d) 200mm |
| 94 | (e) 250mm |
| 95 | Taking out old mechanical Jointand s& F new MJDI type K12 of followng sizeincluding nut bolt all connecting accessories all specified and directed. |
| 96 | (a) 80 mm |
| 97 | (b) 100 mm |
| 98 | (c) 150mm |
| 99 | (d) 200mm |
| 100 | (e) 250mm |
| 101 | Day to Day Maintance GI pipe line various sizes for minor reparing/rectified and attending the complain of pipe line leakage/float valve reparing of size 15 mm to 50 mm by highly skilled trades man as required at site to complete job with stuiplated time without hampering water supply and making functional including all necessary T & P Complete all as specified and directed at site.Note : - (i) The quoted rate deems to exclude for all excavation & dewatering and new GI fittings of suitable size.(ii) The trades man shall report to E/M complaint cell of AGE E/M Dronachal daily at 8.30 am to take complaints from concern JE E/M . The complaint must be attended on same day in stuiplate time period by providing material required and by deploying sufficient manpower by the contractor. The complaint slip duly singned by the user shall be returened back at the complaint cell with proper feed back in the eveing.(iii) For urgent complaint must be come in holiday.(iv) New GI fittings of suitable size,Yarn & safeda/White lead paid and measured to be separetally .(v) Complaint slips & other stationary required for attending complaint shall be supplied by contractor without any extra cost to the departement. |
| 102 | ( a ) 15 mm dia |
| 103 | ( b ) 20 mm dia |
| 104 | (c ) 25 mm dia. |
| 105 | (d) 40 mm dia. |
| 106 | (e) 50mm bore |
| 107 | S&F 25 mm GI socket |
| 108 | S&F 25 mm GI Elbow |
| 109 | S&F 25 mm GI Union |
| 110 | S&F 25 mm GI Tee |
| 111 | S&F GI reducer 25 x 20 mm |
| 112 | S&F GI Nipple 25 x 100 mm |
| 113 | S&F 20 mm GI Union |
| 114 | S&F 20 mm GI Tee |
| 115 | S&F GI reducer 15 x 20 mm |
| 116 | S&FGI Nipple 20 x 100 mm |
| 117 | S&F 15 mm GI Union |
| 118 | S&F 15 mm GI Tee |
| 119 | S&F GI reducer 15 x 25 mm |
| 120 | S&F GI Nipple 15 x 100 mm |
| 121 | S&F 20 mm NRV |
| 122 | S&F 25 mm NRV |
| 123 | S&F 15 mm NRV |
| 124 | S&F teflon tap |
| 125 | M&L for maint & cleaning of surrounding areas of water supply installations, pump house, etc by cutting all bushes, shurbs, sharkandas and any other type of vegetations and trees girth upto 30 cm and treeming the earth surface to make good soil pressions removing and disposal of the waste retreat to a distance not exceeding 100 M by deploying Mazdoor/T&P as required and taking all precautions complete all as specified and directed. |
| 126 | Supply only (Calcium Hypo chlorite)65% -70% Chlorine Content (Calcium based granular disinfectant for water treatment & Swimming poolin factory sealed container/drum) (45 kg packing),complete all as specified and directed. Make - \" (PURI CHLOR) \" manufactured by Shree Rayalaseem Hi-strength Hypo Ltd or any other equivalent make as approved by E-in-C Branch, New Delhi. |
| 127 | Supply, install, testing of open well-submersible pump setof capacity 3 HP, suction size 65 mm,Delivery size 50 mm,Speed 2800 RPM,3 Phase,frequancy 50 HZ,No of stage one,Head18-24 mtr,Discharge max 9.7 LPS,Pump shaft stainless steel, with & including starter of suitable size/capacity and single core copper cable of 10 sqmm length approx (20 metre) connection from starterto motorcomplete all specified and directed. |
| 128 | Supply, install, testing of open well-submersible pump setof capacity 0.5 HP, suction size 25 mm,Delivery size 25mm,Speed 2740 RPM,1 Phase,frequancy 50 HZ,No of stage one,Head12-18 mtr,Discharge max 1.7 LPS,Pump shaft stainless steel, with & including starter of suitable size/capacity and single core copper cable of 2.5 sqmm length approx (20 metre) connection from starterto motorcomplete all specified and directed. |
| 129 | S&F stainless steel Fountain nozzle,Nozzle Diameter 20 mm,Working pressure 5 Bar all as specfied and directed . |
| 130 | M&L for taking out unserviceable submersible pumping set complete with column pipe any capacity and any type from existingbore well carefully without damaging the p/set including connecting parts and lowering the same after repair including provision of suitable size of nut & bolts with washer and suitable packing for column pipes and connection of submersible cable complete all as directed by Engineer -in-Charge.( NOTE: (1) Chain pully block and clamps etc shall be provided by the contractor. (2) Necessary safety pracaution will be responsibility of the contractor. |
| 131 | Supply,install,commissioing and testing of submersible pump set 10 HP of mim head not less than 130 mtr ,min 15 stage ,motor electric driven 3 phase 415 volt AC,50 Hz,2880 RPM ,high quality abrasion resistance bronze and dynamically balanced impeller complete all as specfied and directed. |
| 132 | Taking out old UNSV Starter and S&F in replacement automatic starter of star delta in sheet metalenclosure type, wall mounting suitable for centrifugal pump /submercible pump/monoblock pump pump of , 3 phase, 415 volt, 50 hz, suitable relay range in 5 to 30 Amp, ML contactor, ML over load relayall including taking out old starter single phase preventer fittngs complete all as specified and directed. |
| 133 | Taking out old submersiblle cable and S&F submersible flat copper cable of size6 sqmmX3core , 220 volt , 50 Hzall specified and directed. |
