|
| 1 | M&Lrepair to pot holes any depth, not exc 1 sqmeach including sweeping free from dust and mud or water, scoring sunken surfaces in road, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot-holes exc 30 mm complete all as specified and directed. |
| 2 | M&L for repair to potholes any depth, not exceeding 1 sqm each, including sweeping free from dust, mud or water, scoring sunken surfaces in roads and paths, cutting around edges to at least 25 mm in depth, making good by filling with screened and graded road metal, watering and well ramming, including supply of all materials complete all as specified and directed. |
| 3 | M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm and n exc 50mm deep complete all specified and directed. |
| 4 | Providing and laying WBM grading-1 (90 to 40mm size) for base course, compacted to a thickness of 100 mm, including spreading, rolling with power roller, watering and consolidating to the required grade and camber, blanketing with screening and binding material as per specifications |
| 5 | M&L for preparing Unsurfaced water bound macadam surfaces by brushing with hard wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed. |
| 6 | M&L for applying evenly a priming/tack coat with bituminous primer @ 10Kg/10 Sqm, using paving bitumen of grading VG 10 complete all as specified and directed. |
| 7 | M&L for preparing black top surfaces by brushing with hard wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed. |
| 8 | M&L for applying evenly a priming/tack coat with bituminous primer @ 5 Kg/10 Sqm, using paving bitumen of grading VG 10 complete all as specified and directed. |
| 9 | M&L for bituminous premixed semi - dense asphaltic concrete 25mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient all as specified and directed using paving bitumen of grading VG 30 laid with mechanical paver complete all as specified and directed. |
| 10 | M&L premix bituminous, macadam laid rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), binder content 4 % of binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 10 tonne capacity power roller by using mechanical paver all as specified and directed. |
| 11 | S&F in repair Supply and fixing cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 12 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied high-retroreflectivity, anti-skid thermo plastic road marking paint of approved colour confirming to IS 164:2022 with special applicator machine all as per manufacturers instruction complete all as specified and directed |
