|
| 1 | Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 120 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, not less than 50000 GPH water discharge , 80 mtrhead, fitted on Iron base frame with mandatory accessories etc. complete all as specified and directed. |
| 2 | Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 60 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, not less than 24000 GPH water discharge , 40 mtrhead, fitted on Iron base frame with mandatory accessories etc. complete all as specified and directed. |
| 3 | Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 25 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, not less than 50000 GPH water discharge , 20 mtrhead , fitted on Iron base frame with mandatory accessories etc. complete all as specified and directed. |
| 4 | Supply, installing, testing and commissioning of split case centrifugal pump set with induction motor 15 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, not less than 25000 GPH water discharge , 12 mtrhead , fitted on Iron base frame with mandatory accessories etc. complete all as specified and directed. |
| 5 | Supply, installing, testing and commissioning of back washing arrangement air blower/ compressor (capacity not less than of 350 CFM , pressure 5 PSI) with motor of 13.5 HP ,1450 RPM, 415 volt, 50Hz , fitted on Iron base frame with mandatory accessories all as per existing etc. complete all as specified and directed. Make - Everest, swan , Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE. |
| 6 | Supply, installing, testing and commissioning of vaccum pump set with induction motor 05 HP , 1450 RPM, 415 volt, 50Hz coupled with horizontal split casing type pump, not less than 50000 GPH water discharge , 20 mtrhead , fitted on Iron base frame with mandatory accessories all as per existing etc. complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE. |
| 7 | Supply, installing, testing and commissioning of Automatic home pressure pump set as existing with motor 01 HP , 2800 RPM, 415 volt, 50Hz not less than 3200 GPH water discharge , 52 mtrhead complete with mandatory accessories all as per existing etc. complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE. |
| 8 | Supply, installing, testing and commissioning of chemical dosing equipment of alum, lime complete with agitator shaft provided with blades as existing, motor reduction gear, motor of 05 HP , 1450 RPM, 415 volt, 50Hz provided , fitted on Iron base frame with mandatory accessories all as per existing etc complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE. |
| 9 | Supply, installing, testing and commissioning of motor with reduction gear box with twin drive coupler , motor 05 HP , 1450 RPM, 415 volt, 50Hz , fitted on Iron base frame with mandatory accessories all as per existing etc. complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos or equivalent as approved by GE. |
| 10 | Note :- Ser item No 1.00 to 9.00 is against BER items and material taken out will be deposited in MES store. |
| 11 | Supply, Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 150 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pneumatic timer ,Overload protection Relay suitable Range, in sheet steel enclosure,with single phase Protection feature for 120 HP motor Rating 415 V, 50 Hz, 3 Phase, provided with 4 pole MCCB protection of 250 amps and suitable size contactors three in one as required etc , complete all as specified and directed . |
| 12 | Supply ,Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 75 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pneumatic timer ,Overload protection Relay suitable Range, in sheet steel enclosure,with single phase Protection feature for 60 HP motor Rating 415 V, 50 Hz, 3 Phase, provided with 4 pole MCCB protection of 160 amps and suitable size contactors three in one as required etc , complete all as specified and directed . |
| 13 | Supply ,Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 35 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pneumatic timer ,Overload protection Relay suitable Range, in sheet steel enclosure,with single phase Protection feature for 25 HP motor Rating 415 V, 50 Hz, 3 Phase, provided with 4 pole MCCB protection of 63 amps and suitable size contactors three in one as required etc , complete all as specified and directed . |
| 14 | Supply ,Install, Testing & Commissioning Fully Automatic Star-Delta Starter, max. motor output 25 HP, provided with voltmeter and ampmeter , with NHD contactor, BOCR relay with pneumatic timer ,Overload protection Relay suitable Range, in sheet steel enclosure,with single phase Protection feature for 15 HP motor Rating 415 V, 50 Hz, 3 Phase, provided with 4 pole MCCB protection of 32 amps and suitable size contactors three in one as required etc , complete all as specified and directed. |
| 15 | Supply and fix in replacement of DOL starter for motor pump set upto 5HP , complete all as specified and directed. |
| 16 | Supply fix and testing in replacement of cast iron Non Return Valve 200 mm dia PN 1.6, ISI marked connected with two end flanges suitable for connecting with Pipe, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc complete all as specified and directed . |
| 17 | Supply fix and testing in replacement ofcast iron Non Return Valve 150 mm dia PN 1.6,ISI marked connected with two end flanges suitable for connecting with Pipe, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc complete all as specified and directed . |
| 18 | Supply fix and testing in replacement ofcast iron Non Return Valve 100 mm dia PN 1.6, ISI marked connected with two end flanges suitable for connecting with Pipe, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc complete all as specified and directed . |
| 19 | Supply and fix in replacement gun metal globe or gate valve of size 50mm bore ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe complete all as specified and directed. |
| 20 | Supply and fix in replacement gun metal globe or gate valve of size 20mm bore ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe complete all as specified and directed. |
| 21 | Supply and fix ductile iron sluice valve PN-1.6 with flanged ends 150 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber board gasket nuts, washers etc complete all as specified and directed. |
| 22 | All as per Ser item No 20.00 here in before but 100 mm bore. |
| 23 | Taking up/down steel tubing GI pipelines/connection of 25mm bore from trenches incl connected fittings/accessories complete all as specified and directed. |
| 24 | All as per Ser item No. 22.00 here in before but of 20 mm bore. |
| 25 | Supply and laying in trenches GI pipe 25 mm bore medium grade ISI markedwith all fittings complete all as specified and directed. |
| 26 | All as per Ser item No. 24.00 here in before but of 20 mm bore. |
| 27 | Supply and fix Butter Fly Valve lever operated conforming to IS 13095 of size 150 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc with flanges nut - bolts complete all as specified and directed. |
| 28 | All as per Ser item No 26.00 here in before but 100 mm bore. |
| 29 | Material and Labour for PCC 1:3:6type C1 (using 20 mm graded crushed stone aggregate) for foundation of chloronomes plant /Header/LT Panels etc complete all as specified and directed. |
| 30 | Material and Labour forfoundation with change heavy duty Mild steel channel (Mild steel channelsize not less thenISMC 125mmthickness 8mm appx.) complete for pump motor setincluding PCC (1:2:4) type B1 (using 20 mm graded aggregate) staging size not less then 2.5x1.05x1.0Mtr for surface channels including plaster for above surface, welding work, frame work, Nut & Bolt of suitable size as per old, finishing of staging, leveling and painting, bending cold or hot, drilling holes for bolts of any shape and sizes with hold fast arrangement each for 100/50HP pumping set complete all as specified and directed. |
| 31 | Supplyand fix in ductile iron fittings for spigot and socket /fanged pipe such as bends upto 350 mm bore (any type radius and angle) tapers any type ( straight, bends, increasing, decreasingor double socket etc) Tee pieces single branch, \"Y\" junction, double branch , cross collers , caps and plugs including taking down old unserviceable complete all as specified and directed. |
| 32 | Material and Labour for Earthing complete with galvanised iron earth plate 60×60cm, 6mm thick electrodeas earthing lead buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 32x6mm GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test pointetc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, including removal of unsv old existing earthing, complete all as specified and directed .Note : (i) The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire mesh, RCC cover, etc. complete. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way.(ii) The quoted rate shall include the cost of the earth pit covers to be conspicuously marked of plate with standgrouted in PCC.(iii) On testing after completion if the desired earth resistanceis more than 2Ώthe earthing will be redone at no extra cost |
| 33 | Supply & fixing in replacement of PVC submersible copper cable flat of size 50 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed. |
| 34 | Supply & fixing in replacement of PVC submersible copper cable flat of size 35 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed . |
| 35 | Supply & fixing in replacement of PVC submersible copper cable flat of size 16 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed . |
| 36 | Supply & fixing in replacement of PVC submersible copper cable flat of size 10 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed . |
| 37 | Material and labour for 15mm thick rough cast plaster over and including 10mm thick base rendering in cement mortar (1:4) on brick or concrete surface of any description with WPC @2% by weight of cement or as per manufacturer’s instructions,finished even and fair and including taking down existing raking out joints, hacking of keys, scrubbing down with water etc of any thickness complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 38 | Supply only integral water proofing compound, complete all as specified and directed. |
| 39 | Material and labour for Mild steel framed works such as shafts of alum mixing chamber and flash mixing chamber, blades,grills, gratings etc with ends of bars, shouldered and/or rivetted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame works of water tank and similar work confirming to Fe.290.Gde-E-165 including nuts, bolts, washers, welding, binding, cold or hot, drilling holes for bolts, in any shape or size inclusive of one primer coat, one under coatand one finishing coat ofpaint as specified and directed including taking down existing complete all as specified and directed. |
| 40 | Dismantling of floor or wall tiling/ kota stone/ dholpur stone/checked tile /ceramic tile including cement mortar bedding and removing the rubbish outsidethe defence land complete all as specified and directed . |
| 41 | Supply and fixingmachine cut kota stone slab 20-25 mm thick (of size not less than (55 cm x 55 cm) laid in floor, jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 15mm thick in cement mortar (1:4) base , complete all as specified. |
| 42 | Material and labour for Premium quality, glazed coloured ceramic tiles 300 x 300 x 7mm thick on vertical faces including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 43 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed . |
| 44 | Material and labour for brick work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 and complete all as specified &directed. |
| 45 | Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored (except grey color),interlocking designer paver blocks in Milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including surface excavation over area n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil and removing excavated soil exc 50 mtr but not exceeding 250mtr complete all as specified and directed. Note:- (i) Cost of earth work is included in the unit rate quoted by contractor.(ii) Interlocking paver block is to be done below header at motor room at SYL phase-II. |
| 46 | Material and labour for cement concrete 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and directed. |
| 47 | Material and labour for sand cushioning 25mm compacted complete all as specified and directed. |
| 48 | Supply and fixing of concerteena coil with barbed wires and barbs having 1000mm dia of streched coils complete all as specified and directed. |
| 49 | Supply and laying 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 13.5 (PN-8) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 110 mm, including fittings complete all as specified and directed. |
| 50 | Supply and fix PPR Gate Valves (Brass Insert) of 110 mm bore complete all as specified and directed. |
| 51 | Supply and fix of cast iron 600mm x 600mm open channel sluice gate provided with nuts, washers etc complete all as specified and directed .(SYL-I) |
| 52 | Supply, installation, testing and commissioning LT panel of suitable size as per IE rule and latest IS, factory made dust and vermin proof indoor type made out of 2 mm thick CRCA sheet including seperate compartment for each MCCB & for cable and busbar, mounted on frame of MS angle iron 40mmx40mmx6 mm with front and back openable door with lock & Key including necessary grouting and double coat powder coated of grey colour painting complete with following accessories.The degree of protection of panel shall be IP-54. (CPRI approved) of size not less than (1.0m x 2.5m )INCOMING: (i) 4 pole MCCB 100 Amp, 25 KA rupturing capacity - 2 Nos (01 working + 01 spare)(ii) Aluminium bus bar 3 phase 4 strip suitable for 200 Amps current carrying capacity complete with post insulators and heat shrinkable sleeves.(iii) 200 Amp on load changeover 4pole, 415 volt(iv) Phase indicating lights & control fuses -1 Set(v) Multifunction meter of accuracy class 1 having showing parameteras of 3 pohase voltage, current, frequency, PF, kW, kVA kVAR, kWh–1 SetOUTGOING: (i) DOL starters for 05 hp pumpsets - 07 Nos(ii)MCB 32 Amps SPN ,16 KA breaking capacity- 02 Nos (lighting load)(iii) RYBindication lamp -07 No.(iv) Multifunction meter of accuracy class 1 having showing parameteras of 3 pohase voltage, current, frequency, PF, kW, kVA kVAR, kWh–4 No |
| 53 | Notes for Ser Item No 51.00:-(i) Rate incl all items required for supply, installing , testing and commissioning of LT panel such as any no of contactor of suitable capacity required in star delta starter, time relay, single phase preventor, single pole MCB required for safety , thimbles, end joining kit etc complete. The quoted rate shall include minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc.(ii)All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming toIS-694.(iii) Panel drawing shall be got approved before placing of orderfrom Engr-in-Charge/GE.(iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated.(v) Cable will be entered in panels through gland.(vi) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate. |
| 54 | Supply & laying existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 35 Sqmm 3.5 Core complete including thimble work and all necessary material required for making connection good between the LT panel complete all as specified and directed. |
| 55 | Supply, installing, testing and commissioning of Flash mixer consist of scrap pipe mixer heavy duty reduction gear operated motor 05 HP , 1450 RPM, 415 volt, 50Hz provided with stainless stell blades complete all as existing at SYL plant , fitted on Iron base frame with mandatory accessories all as existing etc. complete all as specified and directed. Make - Kirloskar /Mather & Platt/ Grandfos/greaves ltd or equivalent as approved by GE.Note :- The said item is against BER items and material taken out will be kept in MES store. |
| 56 | Note:-Amount of credit ofRs. 65600.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. |
