|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. |
| 10 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 12 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand). |
| 13 | Providing and fixing of Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate doorframe molded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiberglass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 14 | Providing and fixing to existing door frames.30mm thick fiberglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 : 2000, complete as per direction of Engineer-in-charge. |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete. |
| 17 | Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter. |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 20 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). |
| 21 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 coarse sand). |
| 22 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand). |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. |
| 28 | Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. |
| 29 | Providing and fixing plain bend of required degree. 100 mm. Sand cast iron S&S as per IS - 1729. |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 31 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms. |
| 32 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore. |
| 33 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work, 20 mm dia nominal bore. |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work, 25 mm dia nominal bore. |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. |
| 36 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore. |
| 37 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm nominal bore. |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 40 | Add GST Modifed factor @.973 in total amount from Srl. No- 01 to 53 |
| 41 | Add cost index @ 27.10% from Srl No-01 to 53 |
| 42 | Providing and laying UPVC single socketed SWR pipes type-B for sewerage line conforming to IS code-13592, including all fittings. This includes jointing of pipes & fitting with rubber ring & testing of joints complete as per direction of Engineer-in-charge. External work. 100 mm nominal inner dia pipes. |
| 43 | Wiring for light pt/ fan pt/ Ex-fan pt/ call bell point with 1.5 sq mm FRLSPVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit , with modular switch, modular plate suitable size GI box and earthing the point with 1.5 sq mm FRLSPVC insulated copper conductor single core cableas required (Group- B). |
| 44 | Wiring for circuit / sub main wiring along with earth wire with the following sizeof FRLSPVC insulated copper conductor, single core cable in surface / recessed medium class PVCconduitas required. 2x2.5 Sq mm + 1x2.5 Sq mm earth wire. |
| 45 | Wiring for circuit / sub main wiring along with earth wire with the following sizeof FRLSPVC insulated copper conductor, single core cable in surface / recessed medium class PVCconduitas required. 2x4 Sq mm + 1x4 Sq mm earth wire. |
| 46 | S/F suitable size GI box with modular plate and cover in front on surface or in recess , including P/F 6 pin 5/6 & 15/16 amps modular socket out let and 15/16 amps modular switch ,connections Etc. as required. |
| 47 | Supplying and fixing 6 Way double door Single pole and neutral sheet steel MCB DB 240 Volts on surface/recess complete with tinned copper bus bar, neutral bus bar , earth bar , din bar, interconnection, powder painted including earthing etc as required. ( But without MCB / RCCB / ISOLATOR ) . |
| 48 | S/F 5 Amp to 32 Amp rating , 240/415 VOLTS \" C \" curve , MCB suitable for inductive load of single poles in the existing MCB DB complete with connection , testing and commissioning etc as reqd . |
| 49 | S/F 63 Amp rating , double pole 240 V, Isolator in the existing MCB DB complete with connection , testing and commissioning etc as reqd . |
| 50 | Earthing with GI earth pipe 4.5mtr long , 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangements and watering pipe etc.with charcoal / coke and salt as reqd. |
| 51 | Providing and laying earth connection from eath electrode with6 SWG dia GI wire in 15 mm dia GI pipe from earth electrode i/c connection with GI thimble excavation and re- filling as required . |
| 52 | Supplying and making end termination with brass compression gland and aluinium lugs for 2x25 sq mm (22 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor,cable 0f 1.1 KV grade as required. |
| 53 | Supplying and fixing of light class G.I. pipe of 50 mm dia (nominal) 3 mtr length along the pole for protection of under ground cable etc as required. |
| 54 | Supplying and fixing 20 amps , 240V, SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alongwith 20 amps \"C\" curve SP MCB in sheet steel enclosure on surface or in recess metal cover for the socket outlet and complete with connection testing and commissioning etc as reqd . |
| 55 | AddGST 6% on DSR 2022 by MF @ 0.0633 |
| 56 | Providing and laying of one number PVC insulated and PVC sheathed / XLPE power cableof 1.1 KV gradeof 2 x 25 sq mm armoured cable direct in ground including excavation , and refilling the trench etc as required, but excluding sand cushioning and protective covering ( Havells / Polycab / Standard / Plaza and equivalent make ). |
| 57 | Providing and laying of one number PVC insulated and PVC sheathed / XLPE power cableof 1.1 KV gradeof 2 x 25 sq mm armoured cable direct in the RCC / HUME / METAL as required.Conf. to IS: 7098 part - I of make Havells / Polycab / KEI / Plaza and equivalent make ). |
| 58 | SupplyingInstallation, testing and commissioning of20/22 watts LED batten 4\" long, basic all purpose surface and wall mounted LED batten with polycorbonate housing & integrated electronic driver complete with all accessories i.e connection with 3 x 1.5 sq.mm, FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Make : Phillips/ Crompton Greaves/ Havells etc. |
| 59 | SupplyingInstallation, testing and commissioning of10 watts Mirror light LED batten 2\" long, basic all purpose surface and wall mounted LED batten with polycorbonate housing & integrated electronic driver complete with all accessories i.e connection with 3 x 1.5 sq.mm, FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Make : Phillips/ Crompton Greaves/ Havells etc. |
| 60 | SupplyingInstallation, testing and commissioning of6 watts surface / recess, round / squareLEDwith electronic driver complete with all accessories i.e connection with 3 x 1.5 sq.mm, FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Make : Phillips/ Crompton Greaves/ Havells etc. |
| 61 | Supplying, Installation of 300 mm sweep exhaust fan with metal body and blades with metal louvers including making opening making good the damage, connection, testing , commissioning etc as required. Compatible to Havells Model no.Ventil Air DB Green or equivalent make of Usha/ Khaitan/ CG/ Orptat/ Orient/ Bajaj etc. |
| 62 | Supply installation testing and cmmissioning of 40/45 W LED street light fitting at 230 V , 50 HZ AC with high power LED , Pressure die cast aluminium IP66 protection along with electronic driver with 1.5 sq mm copper wire etc as reqd . MakeBajaj and equebalent make Havells / Philips/Crompton / Syska etc as required. |
| 63 | Providing, installation, testing and commissioning of 50 Ltrs Geyser 230 Volt 50 HZ, 2000 Watt with thermostarter autocut facilities on the wall with providing the connection pipe and makig proper connection with the existing water pipe etc as required with 2 years comprehensive warrantyMonza DX Make - Havellsand equivalent ( Bajaj / Crompton / Jaguar ISI marked 50 ltr capacity vertical mounting storage Geyser ). |
| 64 | Providing and fixing of 63Amp 415 V double pole main switch complete with all accessories etc directly on wall includng connection as required make (Havells / L & T/ HPL). |
