|
| 1 | NOTES :-In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | Taking down Chowkats or frames with shutters not exceeding 1.5 Sqm each (Without taking off shutters from the frames) |
| 3 | Taking down Chowkats or frames with shuttersexceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) |
| 4 | Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed. |
| 5 | Taking down shutters of any description from the frames not exceeding 1Sqm complete all as directed. |
| 6 | S & F Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions and as directed by Engineer-in-Charge. |
| 7 | S&F Factory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. |
| 8 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 9 | S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). |
| 10 | M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed. |
| 11 | S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. 4mm thick glazing with plain glass ,Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 12 | S&F factory made uPVC white colour fixed window / ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 4mm thick glazing with selected quality glass including all necessary items complete all as specified and as directed. |
| 13 | S & F aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified |
| 14 | S&F aluminium powder coated of any colour (thickness or power coating not less than 50 micron) door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified |
| 15 | S&F powder coated aluminium window shutters powder coating of any colour (Thickness or powder coating not less than 50 micron)., sliding type two / three track, for fixing wire mesh aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and directed.Note : Wire cloth will be measured and paid seperately under relevant item. |
| 16 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed. |
| 17 | M&L for Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified |
| 18 | S&F, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed. |
| 19 | S & F Mild Steel Mortice lock 4 leavers vertical type size 100mm complete all as specified and directed. |
| 20 | S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed. |
| 21 | M&L, making good under cills or over arches, lintels andbressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed. |
| 22 | M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.. |
| 23 | M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromeprimer including preparation ofsurfacescomplete all as specified and as directed. |
| 24 | S&F 300mmlong Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.. |
| 25 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section. |
| 26 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section. |
| 27 | S & F 150mmlong extruded aluminium alloy handles fabricated type anodised. |
| 28 | S&F 100mm long MS butt hinges, medium weight cold rolled. |
| 29 | S&F 100mm long stainless steel butt hinges complete all as spd and directed. |
| 30 | S & F, 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete Make:- Crown/Swastik |
| 31 | S & F, in repair 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete Make:- Crown/Swastik |
| 32 | Supply and fix Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long |
| 33 | Supply and fix in repair Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 35 | S&F MS Framed work such as grills or grattingetc with ends of bars welded of any size and any design including welding all as directed of Fe 290 Grade E-165. |
| 36 | M&L welding in repairs n. exc 2.50 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 38 | M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note: Shade, design/pattern of tiles shall be as approved by GE |
| 39 | M&L for10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete all as specified and directed. |
| 40 | M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 41 | Demolition Wallandceilingboards(fibre, pulp, insulation, etc.) any thickness, including cover fillets/frame/hangers etc all as specified and directed by Engineer-in-Charge. |
| 42 | M&L forNon asbestos fibre cement building boards 6 mm thickness fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed. |
| 43 | S&F Anodised aluminium snap grid frame work size 605 x 605mm for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 44 | Taking downcementor cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 45 | M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6complete all as specified and directed. |
| 46 | M&L for Preparing new plastered surfaces of walls and applyingtwo coats of oil bound distemper over a coat of primer over 2mm thick wall care putty complete all as specified and directed. |
| 47 | Taking down old pelmet box /curtain rod of any description and any size complete all as specified and directed. |
| 48 | M & L for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed |
| 49 | M & L for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and Approved |
| 50 | M&L Veneered decorative plywood of 12 mm thick, grade 1 (with BWR resin) with decorative face only on one side fixed with screws to timber frame work complete all as specified and as directed. |
| 51 | S&F external teak wood lipping, 6mm thick, fixed with nails to prelaminated particle board. |
| 52 | S&F 0.9mm thick decorative laminates type I, or surface finish , any colour and pattern as approved . |
| 53 | S& F autoclosing mild steelhinges 4 holes with springfor , cupboardfixed with nut, screw and washer of mild steel, bright finished |
| 54 | S&F stainless steel handles, fancy type 150 mm complete.. |
| 55 | S&F stainless steel handles, fancy type 100 mm complete.. |
| 56 | S&F Locks, cupboard, grade I, size 65 mm4 leversfixed to shutter complete all as directed.Make: Godrej/Harrison |
| 57 | S & F in repairs 0.56mm thickplain aluminium sheeting, Alloy 31000H4 as in bottom portion of door shutters complete all as specified and directed. |
| 58 | S & F Aluminium (Extruded section body ) door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs complete all as specified and directed. |
| 59 | S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified. |
| 60 | M&L for post consturction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/holeby drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 61 | M&L in repair Aluminium Composite panel 3mm thick any colour , any shape fixed on wall or ceiling complete all as specified and directed. |
| 62 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified |
| 63 | S&F lnsulated PVC Wall Lining 25mm thick consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified. |
| 64 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 65 | S&F in repair 12mm thick toughened glass door including all fitting/fixtures, locking arrangements, handles, auto closing hinges etc complete all as specified and directed. |
