|
| 1 | COMMON NOTES |
| 2 | Quoted rates shall deem to include for the following provisions :-(1)The SMART PERIODICAL PORTION of the work shall be carried out through an authorised applicator of paint manufacturer after concluding an MOU with the manufacturer for Company back guarantee for MINIMUM 05 YEARS. (2) MOU shall be submitted to GE by contractor along with Perfomance Security before issue of Work Order. In case of failure to do so, the contract will be cancelled and the contractor will be liable for penalties as stipulated in the tender documents.(3)Contractor shall procure the paint, distemper & primer directly from manufacturer and submit purchase voucher accordingly. Procurement from dealers is not acceptable under the subject contract.(4) Painting shall be carried out in a camouflage pattern as per the new Sigma pattern generated by the AF station, with RGB values varying from 110 to 171, using 4 to 5 color shades in any proportion required to achieve the desired pattern and shades. The contractor\"s quoted rate shall be deemed to include all aspects mentioned herein, and no additional claim shall be entertained during the currency of the work. contd........ |
| 3 | (5)Paint, Distemper and primer shall be supplied in sealed containers and shall be kept in MES Store under custody of concerned JE (Civil). The contractor\"s supervisor shall be responsible for daily collection of container from the concerned JE (Civil). (6)All T&P, transportation, scaffolding, ladders, ropes, trestles, cradles etc shall be provided by the contractor under his own arrangements.(7)The contractor shall provide all necessary safety gear and ensure all safety precautions during the currency of work at any height up to 25 m, and the Department shall bear no liability in case of any accident due to negligence of the contractor.(8)Removing of nails, making good holes, cracks etc with suitable putty, crack filler etc.(9)Work in patches and in narrow width, bands cornices, pilasters etc and cutting in edge of line wherever necessary.(10)Providing, Spreading and removing protective covering to doors, windows, fittings, furnitures, appliances etc to protect them from splashes.(11)Washing floors, cleaning glass panes, joinery, electric fittings, wirings etc. Drops & splashes of primer, paint, distemper & putty to be cleaned to the entire satisfaction of Engr-in-Charge. |
| 4 | PLASTERING WORK |
| 5 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed. |
| 6 | M&L for Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound(as per manufacturer\"s instructions) on external surfaces ofbrick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as \"Supply only\". |
| 8 | Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed. |
| 9 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed. |
| 10 | SMART PERIODICAL[EXTERNAL SURFACES] |
| 11 | M&L for complete removal of existing treatment on old painted surfaces of EXTERNAL WALLS, SOFFITS OF CHAJJAS, ROOF PROECTIONS, FASCIA ETC by scrapping andremoving treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of80 grit size having 7\"-9\" dia (as required) incl cleaning, watering to make the surface clean & free from dust, etc incl necessary scaffolding, safety & protective measures upto any height of buildings complete all as specified & directed.(NOTE: This item shall not be considered for areas measured under Item No. 2.01 here-in-before) |
| 12 | M&L for cutting open visible cracks in existing walls, RCC structures to a ‘V’ groove, cleaning thoroughly to remove dust, loose particles, and laitance, and filling with approved acrylic / epoxy crack filler paste, complete all as specified and directed by the Engineer-in-Charge.(MAKE: STP, PLASTISEAL / FOSROC, RENDEROC CS / SIKA, SIKADUR-20 / DR FIXIT CRACK X) |
| 13 | M&L for applying 1.5 mm thick waterproof wall putty in two layers on old or new plastered surfaces of external walls, soffits of chajjas, roof projections, fascia, etc., of any building height, finished to a smooth and even surface, including all necessary surface preparation, scraping, sanding with sandpaper, scaffolding, safety, and protective measures, complete in all respects as per specifications and as directed. |
| 14 | M&L for applyingtwo coats of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) [IN CAMOUFLAGE PATTERN] over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for any building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 15 | REGULAR PERIODICALS [EXTERNAL SURFACES] |
| 16 | M&L for complete removal of existing treatment on old painted surfaces of walls by scrapping andremoving layers of all wall finishes including cleaning, watering to make the surface clean and free from dust, etc including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 17 | M&L for cutting open visible cracks in existing walls, RCC structures to a ‘V’ groove, cleaning thoroughly to remove dust, loose particles, and laitance, and filling with approved acrylic / epoxy crack filler paste, complete all as specified and directed by the Engineer-in-Charge.(MAKE: STP, PLASTISEAL / FOSROC, RENDEROC CS / SIKA, SIKADUR-20 / DR FIXIT CRACK X) |
| 18 | M&L for applying 1.5 mm thick waterproof wall putty in two layers on old or new plastered surfaces of external walls, soffits of chajjas, roof projections, fascia, etc., of any building height, finished to a smooth and even surface, including all necessary surface preparation, scraping, sanding with sandpaper, scaffolding, safety, and protective measures, complete in all respects as per specifications and as directed. |
| 19 | M&L for applyingtwo coats of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) [IN CAMOUFLAGE PATTERN] over a coat of suitable exterior primer of approved makefor any building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 20 | M&L for applyingtwo coats of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) [IN CAMOUFLAGE PATTERN] over a coat of suitable exterior primer of approved make over new ROUGH CAST plastered surfaces complete all as specified and directed. |
| 21 | M&L for preparation of old decorated plastered / concrete surfaces on external surfaces of buildings by brooming down or steel wire brushing and scraping down, removing all algae, lichen, fungi or any organic growth, washing and cleaning the surface by sweeping, allowing to dry and then remove all loose dirt & dust particles, cleaning and filling of cracks with suitable putty or cement paste/mortar, allowing to dry and applying Two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (in camouflage pattern) for any building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 22 | M&L for preparation of old decorated plastered / concrete surfaces on external surfaces of buildings by brooming down or steel wire brushing and scraping down, removing all algae, lichen, fungi or any organic growth, washing and cleaning the surface by sweeping, allowing to dry and then remove all loose dirt & dust particles, cleaning and filling of cracks with suitable putty or cement paste/mortar, allowing to dry and applying One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (in camouflage pattern) for any building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 23 | M&L for preparation of old decorated ROUGH CAST plastered surfaces on external surfaces of buildings by brooming down or steel wire brushing and scraping down, removing all algae, lichen, fungi or any organic growth, washing and cleaning the surface by sweeping, allowing to dry and then remove all loose dirt & dust particles and applying Two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (in camouflage pattern) complete all as specified and directed. |
| 24 | M&L for preparing old treated/decorated surfaces of ceilings, soffit of chajja, etcand applying Two Coats of White Wash, complete all as specified and directed. |
| 25 | M&L forpreparation of old painted/unpainted steel roofing sheets or wall cladding (corrugated / plain), over 10 cm in width or girth by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots over 10cm width or girth and applying two coats of synthetic enamel paint (in camouflage pattern) over a coat of red oxide primer for any building height including removal of old zinc coating using mordant soluton and all necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 26 | M&L forpreparation of old painted steel roofing sheets or wall cladding (corrugated / plain), over 10 cm in width or girth by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots over 10cm width or girth and applying two coats of synthetic enamel paint (in camouflage pattern) for any building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
