|
| 1 | Demolition of brick work, PCC and RCC of any descriptionand in any positionnot otherwise specifically providedfor complete all asspecified. |
| 2 | Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc |
| 3 | Dismantling structural steel work including doors, gates,etc all as specified and directed by Engineer in Charge |
| 4 | Earth work in excavation over areas not exceeding1.5 m in depthincluding getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m inallkindofsoil , as directed by Engineer-incharge, as directed by Engineer-in-charge. |
| 5 | Dittobutdepthexceeding 1.5mbutnotexceeding3.00 mtr |
| 6 | Returning filling in soil, including spreading, leveling,watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 7 | Removing excavated soil to a distanceexc 50m but not exceeding 500m and deposting where directed complete all as specified and as directed. |
| 8 | M&L PCC 1:4:8 type D2using 40mm graded aggregate as in foundation, subbase and mass filling concrete etc complete all as specified and as directed. |
| 9 | M&L reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specifiedanddirected. |
| 10 | M&L reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specifiedanddirected. |
| 11 | M&L reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) sabs supported on walls, beams and columns in floors, roofs, landings, balconies, Chajjas, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 12 | M&L reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate)Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 13 | M&L for formwork to sides of rough finished flat surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specifiedanddirected. |
| 14 | M&L for formwork to sides of rough finished flat surface of concrete pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 15 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, Chajjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 16 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 17 | S&FTMT bars 10 mm dia & over cut out length, bent to shape including cranking, bending and binding with 0.9 mm dia mild steel wire or securing with clips complete all as specified and as directed |
| 18 | S&FTMT bars 5 mm dia and over up to and including 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9 mm diamild steel wire or securing with clips for stirrups complete all as specified and as directed |
| 19 | M&L for brickwork with fly ash old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified |
| 20 | M&L for Plain Cement Concrete 1:2:4 type B-1 (12.5 mm graded aggregate) as in coping, Kerbing, flooring, mass concreting, water troughs and similar work including weathering, slightly roundede or chamfered angles and throating, as directed. |
| 21 | M&L for rendering 15 mm thick onconcrete surfaces/brick walls set in CM 1:6 finished even smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for finishing walls, Columns and beams with textured finish of approved design including exterior acrylic emulsion paint of approved shade two or more coats overexterior primer complete all as specified and as directed. |
| 23 | M&L rendring 10 mm thick in CM 1:4 on concrete surface/brick work complete all as specified and as directed. |
| 24 | M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed |
| 25 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running rails and guides) and hanging; also fastening and fixing and similar work confirming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 26 | M&Lpreparationofneworpreviouslyuntreatedsteelsurfacesofanydescriptionover 10 cminwidthorgirthandapplyingtwo coatofsyntheticenamelpaintovera coatofred oxide , zincchromeprimer , completeallasspecifiedanddirectedby Engineerin Charge |
| 27 | M&L Anti-skid / Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer of mortar in cementmortar 1:6 for lying floor finishes complete all as specified and directed |
| 28 | M&L glazed ceramic coloured tiles 450x 300x 6 to 7mm thick on vertical surfaces such as dados,wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces including 10 mm thick backing coat in CM (1:4) finished rought to receive wall tiles complete all as specified and as directed. |
| 29 | M&L 18 to 20mm thickGranite (of any type) work (table rubbed and polished) including edge chamfered and full/half nosing for verticle surface andwall lining (veneering to wall) 15mm thick as backing coat in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all asspecified and directed. |
| 30 | S&F Powder coated of approved shade aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as directed by Engr-in-Charge |
| 31 | S&F in anodised aluminium Powder coated of approved shade door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. complete all as specified complete all as specified and directed |
| 32 | S&F Anodised aluminium powder coatedof approved shade window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 33 | S&F sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as directed |
| 34 | S&F 1.2mmstainless steel 18 gauge (304 grade) enbossed 3 Dletterwithtwolanguagewith Ashoka EmblembothinHindi&English (Military CollegeofElectronicsandMechanicalEngineering ) Letter size andheight 30cm to 45cmor as approved by Engr-in-Charge complete all as specified and as directed. |
| 35 | E/M PORTION M&Lfor point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including cutting chases andcontinous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including Concealed modular metal flush boxes in walls and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc and making good the disturbed surface to match with existing complete all as specified and directed by E-IN-Charge for the following:- |
| 36 | (a) One light point controlled by one, one way switch 6 A, SP |
| 37 | (b)One ceiling fan/exhaust fan point controlled by one, one way switch |
| 38 | (c) One bell point controlled by one bell push. |
| 39 | (e)One 3 point 6 Amps switch socket outlet point controlled by one switch on the same board. |
| 40 | (f)One 3 pin 6 Amps switch socket outlet point controlled by one switch on independent board. |
| 41 | Description all as per item No 1 here-in-before but using 4.0 Sq mm single core copper conductor cable of multistranded PVC FRLSH insulated unsheathed 1100 Volts grade for 6/16 Amps switch socket combination point including running of 4.0 Sq mm copper conductor PVC FRLSH wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 42 | S&F modular switch 1way 6A, 1 module all as specified and directed |
| 43 | S&F modular switch 1way 16A, 1 module all as specified and directed |
| 44 | S&F modular Bellpush 6A, 1 module, 230 Volts all as specified and directed. |
| 45 | S&F modular socket, 6A - 2/3 pin combined 2 module, flush tpe all as specified and directed |
| 46 | S&F modular socket, 6A/16A - 2/3 pin combined 2 module, flush tpe all as specified and directed |
| 47 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified. |
| 48 | S&F modular metal flush box 6 module all as specified and directed |
| 49 | All as per item No.48 hereinbefore but 4 moudle |
| 50 | All as per item No48 hereinbefore but 3 moudle |
| 51 | All as per item No.48 hereinbefore but 2 moudle |
| 52 | S & F modular white cover plate with frame 6 module all as specified and directed |
| 53 | All as per item No.52 hereinbefore but 4 moudle |
| 54 | All as per item No.52 hereinbefore but 3 moudle |
| 55 | All as per item No.52 hereinbefore but 2 moudle |
| 56 | S&F of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. |
| 57 | S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge. |
| 58 | Supply & replacement of 20 W ( minimum 120 lumem / watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/w, CRI>80, PF>0.9, CCT 6500K, independent isolated SMPS pased constant current electronic LED driver with THD<20%, surge voltage protection and other safety tests as per IS15885 (Part-2/Sec-13): 2012, with rated life 50,000 burning hours, system efficiency/ lumens 120 lumen per watt and housing made up of aluminium, white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input freqency 50-60 Hz, including electrical connection with3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Note: Contractor shall submitTDS ( Technical Data Sheet) alongwith sample approvalMake: Havells-ENDURALINE APRROBSO20W LED 865SPCSSIND/ Philips BN 170CLED 20S- 6500PSUL120/ WIPRO LL24-311-XXX-65-HE |
| 59 | S&F electric bells AC 230 single pole and testing complete all as specified and directed by the Engineer-in-Charge. |
| 60 | S&F modular fan step regulator, 2 module all as specified and directed. |
| 61 | S&Fceiling fans completewith blades, down rods, electronic regulator and accessories, white color, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC). Note : - Old Fan deposit in MES store yard.Make: Havells Cat No. FHCSS1SWHT48 / STANDARD Cat No. FSCZL5SWHT48 / Bajaj Cat No. 251100. |
| 62 | S&FWall mounted fans AC single phase 230/ 240 V, of size 450 mm sweep, PVC body, three blade with service value 6.00 BEE. Five star rated With fixing arrangement.complete all as specified and directed by the Engineer-in-Charge. Make: Havells / Crompton / Bajaj / Orient |
| 63 | M & L for Submain wiring with two single core 10 Sq mm PVC FRLSH insulated unsheathed copper conductor multistranded 1100 Volts grade drawn in and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall including cutting & chases with one run of 10 sqmm PVC FRLSH insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note 1: Two runs of 10 Sqmm cable, one run of 10 Sqmm earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length length including qutade rate. |
| 64 | M & L for Submain wiring with two single core 6 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn in and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall/floor with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note 1: Two runs of 6 Sqmm cable, one run of 6 Sqmm earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length length including qutade rate. |
| 65 | S&F sheet Metal enclosure double door type for DB’s 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar complete all as specified andas directed.Make: ABB/ Legrand/ Havells. |
| 66 | S&F sheet Metal enclosure double door type for Vertical TPN DB for 125 Amp MCCB as incommer, 12 way with 200 Amps rated bus bar complete all as specified andas directed. Make: ABB Cat No.1SYN8690VMXT108/ Legrand Cat No. 5077 52/ Havells Cat No. DHDLVDRWAOFO08. |
| 67 | S&F MCCB 415 Volt 16/18 KA 4 pole 125 Amp thermal magnetic trip release & setting ICU= 100% ICS as incoming with fixing arrangement complete all as specified and directed. Make: ABB Cat No. ISDA066708R1 / Legrand Cat No. 6697 19./C&S Cat No. CS3A4* |
| 68 | S&FMCB SPN 40/63Amps , 240 volt, 10 KA,complete all as specified andas directed. Make: Havells Cat No. DHMZCSPF006-040 / ABB Cat No. 1SYS272012R0404/ Legrand Cat No. 4086 18. |
| 69 | S&F MCB SPN 32 Amps , 240 volt, 10 KA,complete all as specified andas directed. Make: Havells Cat No. DHMZCSPF006-032 / ABB Cat No. 1SYS271112R0324 /Legrand Cat No. 4086 17. |
| 70 | S&F MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Cat No. DHMZCSPF006-032 / ABB Cat No. 1SYS271012R0324 / Legrand Cat No. 4085 95. |
| 71 | S&F Energy saving and environmental friendly long life 60W LED bldg security light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08, potted Elect driver with surg protection, min 50000 burning hrs complete with all accessories incl three run of 1.5 Sqmm Copper conductor cable from security light to ceiling rose complete.Make : Havells/ Wipro/Philips |
| 72 | S&F GI pipe bracket made of 40 mm bore light grade pipe made to shape of overall length of 1.2 mtr for fixing of security light fittingincluding MS clamps , nuts & bolts of required size complete |
| 73 | S&Fon wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 50 Sqmm , 3.5 core all as specified and directed. ( Main panel to VTPN DB ) Make: Havells/KEI/Polycab/Gloster |
| 74 | Excavation in trenches not exceeding 1.5 mtr width and not exc 1.5 mtr in depth and getting out in hard /dense soil for laying / repairing of LT cable / GI pipe. |
| 75 | Supply, spread river sand of approvalin cable trenches providing for cable cushioning as directed.NOTE :- Punned thickness of sand only will be measured and paid. |
| 76 | Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm |
| 77 | S&F medium grade GI tubing of 50 mm dia for XLPE cable protection complete all as specified and as directed |
| 78 | S&F in replacement round shape 12/15 watt 220 volts AC 4\"\"/6\"\" recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, suitable for roof ceiling /false ceiling including connecting up with three core flexible copper conductor cable of suitable size. Make : Havells/ Wipro/Philips |
| 79 | S&Fin replacementLED Bush type pointed focus ligh fitting for gate light 12/15 Watt 230 V AC decorative type with high pressure die cast aluminum hosing, fixing in 300x300mm plenth and cover to6 mm GI mesh frame with driver, (with burning hrs 50000), surg protection complete. Make : Havells/ Wipro/Philips |
| 80 | S&F in repairLED bollard lights fitting 12 Watt 230 V AC, 4\" decorative round type with high pressure die cast aluminum hosing with driver, (with burning hrs 50000), surg protection complete. Make : Havells/ Wipro/Philips |
| 81 | S&F LED 2 side point focus (wall washer) lights fitting 9/10 Watt 230 V AC, decorative type with high pressure die cast aluminum hosing with driver, (with burning hrs 50000), surg protection complete. Make : Havells/ Wipro/Philips |
| 82 | S&F in replacement of LED Strip light luminaries of 10W INDIA FLAG COLOUR water proofing, with driver (01 driver for 18mtr each), IP 67 protection and with all fixing arrangement, to electric system with 1.5 Sqmm PVC Copper stranded conductor 2 core up to require length and to be fixed on 9 Mtr longpole srrounding to pole complete all as specified and directed. Make : Havells/ Wipro/Philips. |
| 83 | S&Fof LED Strip light luminaries of 10W Whight COLOUR water proofing, with driver (01 driver for 18mtr each), IP 67 protection and with all fixing arrangement, to electric system with 1.5 Sqmm PVC Copper stranded conductor 2 core up to require length and to be fixed on 9 Mtr longpole srrounding to pole complete all as specified and directed. Make : Havells/ Wipro/Philips. |
| 84 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mmbore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.) |
