|
| 1 | Labour only for attending day to day external/treated water supply complaints of all nature including grey water pipe leakage i.e leakage in water supply pipe lines , fitting/fixture, over flow of overhead tank, no water supply in supply tank/direct kitchen tap and grey water supply in various locations & taking out water from trenches during repair including note downthe complaints in complaint register complete all as specified and as directed(Note:- Any material required for attending complaints shall be measured and paid separately under respective item herein after as \"Supply only\"). |
| 2 | Labour only for attending day to day electric supplycomplaints of day to day maintenance of existing LT Panels involving replacement of meterials including connecting electrical accessories / spares of water supply installation from 0830 hrs to 1730 hrs and electrical fitting & light, short circuits in pump house including Note down the complaints from various locations in complaints register and distribution to the trademen complete all as directed. (Note:- (i) Any meterial required for atteding complaints shall be measured & paid seperately under respective item here after as \"supply only\")(ii) The suitable shift duites as deems fit shall be decision of the Engr-in-charge |
| 3 | Notes for Item No 1.01 & 1.02 :-(i) Any material required for attending complaints shall be measured & separately under respectvie items here - in- after.(ii) The complaints shall be attended and the defetcs shall be rectified by a team of matric qualified having minimum 03 years experienced electrician/Plumber as applicable assisted with adequate number of helpers as directed by Engineer-in-charge.(iii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 200/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor\"s dues.(iv) In case, after checking & attending the defect, it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep.IfEngineer-in- charge is satisfied with contractors view, no recovery will be made.(v)While attending the complaint of water supply if earth workis required then the same shall be measured and paid seperately under appropriate itemof Sch \"A\" of BOQ. However, no extra payments shall be made for dewatering.(vi)Cutting of GI pipe in position and threadingis also deemed to be included in the job rate (Fittings and fixtures will be measured and paid separetely under respective items of Sch as \"supply only\").(vii) All T&P required for attending the Complaints shall be provided by the contractor.) |
| 4 | (viii) The Pipe Fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench, Chain wrench, Caulking tools, complete set of spanners and ladders etc asrequired at site.(ix)The Electrician shall always in possession of all Electrician tools, LT Megger, Earth Tester, Multimeter, Crimpling tool, insulation tape, Hand gloves etc required at site. (x) Rate for taking down/out existing & fittings & fixtures and refixing to make it functional shall be into account. All the fitting & fixtures shall be measured and paid supply only in respective items of BOQ i.e. Ser Item No. 3 to 16, 17, 18.01 to 18.05, 24, 44 to 50 and 54 to 60.(xi) A BOO ordered for material procured by contractor and taken on charge through RV and complaint wise dockets will maintained and USR\"s duly vetted by AO GE (E/M) for procured materials issued for incorporation in work will be mentioned in BOO. BOO will concorn/approved by Accepting Officer in one time for complete materials to be consumed in work and if any balance quantity of material left with contractor the same will received back on credit USR\"s & kept on record. |
| 5 | Supply only GI Socket \"medium grade\" ISI Marked superior / standard of a make of following sizes :- |
| 6 | 15 mm bore |
| 7 | 20mm bore |
| 8 | 25mm bore |
| 9 | 40mm bore |
| 10 | 50mm bore |
| 11 | Supply only GI Elbow \"Medium grade\", ISI Marked superior / standard of a make of following sizes : - |
| 12 | 15 mm bore |
| 13 | 20mm bore |
| 14 | 25mm bore |
| 15 | 40mm bore |
| 16 | 50mm bore |
| 17 | Supply only GI Union \"Medium grade\", ISI Marked superior / standard of a make of following sizes : - |
| 18 | 15 mm bore |
| 19 | 20 mm bore |
| 20 | 25 mm bore |
| 21 | 40 mm bore |
| 22 | 50 mm bore |
| 23 | Supply only \"GI Nipple\" of suitable length as required at site & ordered by EIC both end screwed \"Medium Grade\", ISI marked superior / standard of a make of following sizes: |
| 24 | 15 mm bore |
| 25 | 20mm bore |
| 26 | 25mm bore |
| 27 | 40mm bore |
| 28 | 50mm bore |
| 29 | Supplyonly GI Reducing socket \"medium grade\" ISI marked superior / standard of a make of the following sizes :- |
| 30 | 20 mm x 15 mmbore |
| 31 | 25 mm x 15 mm bore |
| 32 | 25 mm x 20 mmbore |
| 33 | 50 mmx 40mmbore |
| 34 | Supply only GI Tee \"Medium grade\" of different length as per requirement, both end screwed ISI marked of following sizes : - |
| 35 | 15mm x 15mm x 15mm |
| 36 | 20 mm x 20 mm x 15 mm |
| 37 | 20 mm x 20 mm x 20 mm |
| 38 | 25 mm x 25 mm x 20 mm |
| 39 | 25 mm x 25 mm x 15 mm |
| 40 | 25 mm x 25 mm x 25 mm |
| 41 | 40 mm x 40 mm x 20 mm |
| 42 | 40 mm x 40 mm x 25 mm |
| 43 | 40 mm x 40 mm x 40 mm |
| 44 | 50 mm x 50 mm x 15 mm |
| 45 | 50 mm x 50 mm x 20 mm |
| 46 | 50 mm x 50 mm x 25 mm |
| 47 | 50 mm x 50 mm x 40 mm |
| 48 | 50 mm x 50 mm x 50 mm |
| 49 | Supply only GI Solid plug heavy duty ISI Marked superior / standard of a make of following sizes : - |
| 50 | 15 mm bore |
| 51 | 20 mm bore |
| 52 | 25 mm bore |
| 53 | 40 mm bore |
| 54 | 50 mm bore |
| 55 | Supply only in replacement PVC \"L\" type Holdersuitable for Aluminium rod,Float Ball etc all as required at site and complete all as specified and as directed of following Sizes:- |
| 56 | 15 mmbore |
| 57 | 20 mm bore |
| 58 | 25 mmbore |
| 59 | 50 mm bore |
| 60 | Supply only PTMT float valve with epoxy coated aluminium rod and high density plastic ball of following sizes complete all as specified and as directed |
| 61 | 15 mm bore |
| 62 | 20 mmbore |
| 63 | 25 mmbore |
| 64 | 50 mm bore |
| 65 | Supply only gun metal gatevalves with iron wheel head screwedboth ends for iron pipe, ISI marked as per IS : 778 of followingsizes complete all as specified and as directed |
| 66 | 15mm bore |
| 67 | 20 mm bore |
| 68 | 25 mm bore |
| 69 | 50 mm bore |
| 70 | Supply only in replacement GI Reducing Elbow medium grade ISI marked of the following sizes :- |
| 71 | 20mmx15mmbore |
| 72 | 25mmx15 mm bore |
| 73 | M&L for rubber gasket joint including material for CI/DI Pipe of following sizes complete all as specified and as directed:- |
| 74 | 100 mm bore |
| 75 | 150 mm bore |
| 76 | Labour only for run lead joint by using new lead and new spun yarn including jointing material for CI/DI pipes of following size/bore. (Note: Run lead and spun yarnused for repairing the joints following sizes of pipe will be measured and paid seperately under respective items as supply only.) |
| 77 | 100 mm bore |
| 78 | 150 mm bore |
| 79 | Supply and Fixing in replacement of CI Foot valve offollowing size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and directed by Engineer-in-Charge. (Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items. |
| 80 | 80mmdia |
| 81 | 100mmdia |
| 82 | 150mmdia |
| 83 | S&F DI Joint / MJ Collar including its all recessary fittings all as per IS : 9523 (2000) in replacement of following sizes complete all as specified and directed by Engr-in-Charge. |
| 84 | 100 mm dia |
| 85 | 150 mm dia |
| 86 | M&L fabrication (welding work) of MS Header /any size upto 400 mm MS pipe at various pump house for arresting leakages on header complete all as specified and directed. |
| 87 | Supply only of Lead Pig bar of standard quality inclosed container complete all as specified and directed. |
| 88 | Supply only Spun Yarn of best quality in bundles complete all as specified and directed. |
| 89 | Supply only Nuts ,Bolts and Washers 25 to 150 mm long of 6 to 20 mm dia complete all as specified and as directed. |
| 90 | Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed.Note :- Excavation & earth work shall be measured & paid separetely. |
| 91 | 15mm bore |
| 92 | 20 mm bore |
| 93 | 25 mm bore |
| 94 | 40 mm bore |
| 95 | 50 mm bore |
| 96 | Refixing/relaying, jointing and testing old GI steel tubing of following sizes, retrieved under Serl No 22 here-in-before in new or old position at walls, ceiling or floor etc including cleaning or rerunning the old screw threasds with & including providing new GI fittings complete all as specified and directed.(Note:- Excavation & earth work shall be measured & paid separetely.) |
| 97 | 15mm bore |
| 98 | 20mm bore |
| 99 | 25mm bore |
| 100 | 40mm bore |
| 101 | 50mm bore |
| 102 | Supply of GI steel tubing medium grade of following size in old or new position as in ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and direcetd.(Note:- Excavation & earth work shall be measured & paid separetely.) |
| 103 | 15mm bore |
| 104 | 20mm bore |
| 105 | 25mm bore |
| 106 | 40mm bore |
| 107 | 50mm bore |
| 108 | Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed. |
| 109 | 15 mm bore |
| 110 | 20 mm bore |
| 111 | 25 mm bore |
| 112 | 40 mm bore |
| 113 | 50 mm bore |
| 114 | Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed endsand lead tyton joints includingburning out lead jointsand recovering lead and including cleaning for refixing or removal, making good disturbed surface complete all as specified and as directed.(Note:- (i) Excavation & earth work shall be measured & paid separetely.(ii) Layout plan for laying of DI pipe shall be given by EIC in writing.(iii) DI pipe whole quantity of tender shall be procured by contractor for payment in 1st RAR as material lying at site. |
| 115 | 100mm bore |
| 116 | 150 mm bore |
| 117 | 200 mm bore |
| 118 | Supply, layingjointing,testingDIpipe with class-K-7 spigot socketed ends , conforming to IS-8329 laid in trenches including providing route indicators of suitable height and laying at spacing of @ 50m center to center at GL mentioning name of contractor, date of execution & CA No with name of work & rubber gasket (Tyton) joints with jointing material & route indicators of the following sizes including taking down of existing CI/DI pipe complete all as specified and directed by Engineer-in-Charge.(Note : (i) Excavation & earth work shall be measured & paid separetely under respective items of BOQ.(ii) Contractors will provide route indicators mild steel body with top 150 mm plate 3mm thick and height not less than 300mm above finished GL at suitable intervals as directed by EIC. Cost of route indicators shall be deemed included in quoted unit rates.(iii) DI pipe whole quantity of tender shall be procured by contractor in one time from the authorised dealer of approved make and PV\"s, MTC & e-way bill will produced by contractor during payment of 1s RAR as material laying at site.(iv) Piece meal site for laying of pipe shall be given by EIC and contractor arrange to transport the DI pipe accordingly at his own arrangement. No any additional payment for transportation will be given to contractor. Contractors are requested to quote rate accordingly.(v) Layout plan for laying of DI pipe shall be given by EIC in writing.(vi) Cost of Rubber gasket joints (Tyton Joint) included in quoted unit rates. |
| 119 | 100mm bore |
| 120 | 150 mm bore |
| 121 | 200 mm bore |
| 122 | M&L CI/DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of following size confirming to IS: 1538-1993 complete all as specified and directed by Engr-in-Charge. |
| 123 | Upto 150mm bore |
| 124 | 200mm bore to 300mm bore |
| 125 | Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes.(Note:- Spare parts under relevant items shall be measured and paid separately under respective items.) |
| 126 | 80 mm bore |
| 127 | 100 mm bore |
| 128 | 150 mm bore |
| 129 | 200 mm bore |
| 130 | Supply only \"stem\" made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed. |
| 131 | 80 mm bore |
| 132 | 100 mm bore |
| 133 | 150 mm bore |
| 134 | 200 mm bore |
| 135 | Supply only \"Stem Nut\" made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed. |
| 136 | 80 mm bore |
| 137 | 100 mm bore |
| 138 | 150 mm bore |
| 139 | 200 mm bore |
| 140 | Supply only \"Gland Plate\" made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed. |
| 141 | 80 mm bore |
| 142 | 100 mm bore |
| 143 | 150 mm bore |
| 144 | 200 mm bore |
| 145 | Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, forpipe of size 15 mm bore (but not less than 75g/each) complete all as specified and as directed. |
| 146 | Supply andfixingin replacement rotational moulded polyethylene water storage tank, cylindrical vertical with closed top,500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed.. |
| 147 | Supply andfixing in replacement rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity)complete all as specified and as directed.(Note for ser item No 34 & 35 :- (i) For Pump Priming purpose in pump house.(iii) Tank shall be provided on PCC (1:2:4) type B-I using 20mm graded crushed stone aggregate ramp of 150mm thick round shape over roof slab or in ground floor over sub base of PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate and top surface of ramp finished even and smooth using extra cement complete the cost of ramp will be deemed included in quoted unit rate.) |
| 148 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 M indepth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed. |
| 149 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 150 | Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed. |
| 151 | Removing weeds and wild grass inside the installations using chemical spray and trimming trees and unwanted plants using petrol operated Tree/Grass cutting tools and dressing of the surface by scrapping high patches and filling low patches with the scrapping soil to give an even and neat look to the site and disposing off all the unwanted grass, bushes and debris complete all as specified and directed by the Engineer-in-Charge. |
| 152 | Supply only Switch Piano flush type 5/ 6 amps single pole one way 240 volts complete all as specified and as directed. |
| 153 | Supply only Switch Piano flush type 15/16 amps, single pole, one way, 240 volts complete all as specified and as directed. |
| 154 | Supply only Switch Socket combination2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed. |
| 155 | Supply only Switch Socket combination 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed. |
| 156 | Supply only MCB SP, 6 to 32 Amp \"C\" curve, 240 volts complete all as specified and as directed. |
| 157 | Supply only PVC insulated multistranded copper conductor wire of size 1.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed. |
| 158 | Supply only PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed. |
| 159 | Supply only PVC multistranded aluminium conductor, 1100 volts grade , cross sectional area 6 sqmm, 2 corefixed on panels/walls complete all as specified and as directed. |
| 160 | Supply onlyLED batten arrow for multi application suitable for 18 Watts with & including necessary cable connectionto make it functional complete all as specified and as directed. |
| 161 | Supply only PVC insulated multistranded copper conductor wire of size 4 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed. |
| 162 | Supply only PVC multistranded aluminium conductor, 1100 volts grade , cross sectional area 4 sqmm, 2 corefixed on panels/walls complete all as specified and as directed. |
| 163 | M&L for painting of Sluice Valve , NRV , Stainer of size upto 400 mm dia bore with onecoat of super enamelled paint including preperation of old surface complete all as specidied and as directed . |
| 164 | Material & Labour for painting on steel and iron surfaces with one coat of synthetic enamel paint as per existing colour scheme or pattern complete all as specified and directed |
| 165 | S&Fof CI NRV of following sizes complete all as specified and as directed : |
| 166 | 100 mm dia |
| 167 | 150 mm dia |
| 168 | S&F in replacement of 3 P power contactor of ML 1.5 complete all as specified and directedby Eng in charge |
| 169 | S&F in replacement of 3 P power contactor of ML 3 complete all as specified and directedby Eng in charge |
| 170 | Supply and laying of rubber insulated mat of size 2.00 mtr * 1.00 mtr of 19 mm thick ISI marked complete all as specified and as directred by by Eng in charge |
| 171 | Supply and fixing LED street light fitting 70Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 172 | Supply only for fixing in replacement od LED lamp 9 watt complete all as specified and directed |
| 173 | An amount of Rs 1,34,332.00 shall be deducted from BOQ on account of schedule of credit |
