|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete or masonary |
| 2 | S&F for MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 3 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil. |
| 4 | M&L PCC 1:3:6 Type C2 40 mm graded stone aggregate in foundation, filling and mass concrete as in boundary pillars and post etc all as specified and directed. |
| 5 | MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 |
| 6 | Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 7 | Fixing only new chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 8 | S&F Mild steel round bars 10mm dia and over as in strengthening bars for bending cranking spirallt for hooking for chain link, hooking end and or welding with flats of chain link fencing complete all as specified . |
| 9 | M&L for preparation of new iron surfaces of any description over10cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 10 | M&L for preparation of new iron surfaces of any description nexc 10cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 11 | S&F in rpr, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed |
| 12 | Formwork to sides of concrete foundations, footings, bases of columns, drain walls, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, fair finished surfaces flat or curved etc or where required complete all as spd and directed. |
| 13 | M&Lbrickwork with flyash old size bricks built in CM 1:6 straight or curved on plan exe 6 m mean radious complete incl demolition of brick work any type complete all as specified and directed. |
| 14 | Rendering 15 mm thick in CM(1:4) on fair faces of bricks or concrete surface finished even smoth without extra cement etc complete all as specified. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete |
| 16 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, posts, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. complete all spd and directed. |
| 17 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 18 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer incl dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete all as specified and directed |
| 19 | S&F Plain 0.71mm thick Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) |
| 20 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 21 | M&L Cement concrete type C2, 1:3:6 (40mm graded aggregates) in mass concrete or in smilar work complete all as specified and directed. |
| 22 | M & L cement concrete 1:2:4 (using 12.50 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope or in similar wks where required complete all as specified. |
| 23 | M&L in repair providing and laying at or near, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 24 | M&L for preparation of old or new surfaces of kerb stone and applying two coat of synthetic enamel paint complete all as specified & directed. |
| 25 | S&Ffor 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment all as specified and directed. |
| 26 | M&L for Machine cutkota stone slab flooring 20-25mm thick over cement screedbase 20mm in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed . |
| 27 | M&L for Cement concrete 150 mm thick type D- 2, 1:3:6 (40mm graded aggregate) as in sub base etc complete all as specified and directed |
| 28 | Dismantling or removal of settled Bricks/ Interlocking block any thickness (laid flat or on edge) or brick tiles in path, floors, channels, kerbs, aprons, etc. (each layer) laid dry and pointedcomplete all as specified and directed |
| 29 | Fixing only of Brick/ Interlocking blocks any thickness as in pathway or hardstanding (except tiles) over sand cushioing etc complete all as specified and directed |
| 30 | S&F machine pressed precast concreteinterlocking paver block any shape size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed |
| 31 | S&F machine pressed precast concreteinterlocking paver block any shape size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and no pigment complete all as specified and directed |
| 32 | M&L for sand filling under floors of interlocking tiles as specified and directed. |
| 33 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed of CM 1:4 all as specified and directed |
