|
| 1 | Excavation in trenches not exceeding 1.50 m wide and n exc. 1.5 m in depth; for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil and removing surplus soil to a distance not exceeding 50 m and making good surfaces complete all as specified and directed. |
| 4 | M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil all as specified and directed. |
| 6 | Removing surplus excavated materials (soils) upto a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 7 | Material and labour for hard core with broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, wateredand rolled/ rammed to a true surface complete all as specified and directed. |
| 8 | Material and labour for 75 mm thick Plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed. |
| 9 | M&L for providing cement concrete type C2, 1:3:6 (40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed. |
| 10 | S&F steel work in tubular vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gradeSt.-240 complete all as specified and directed. |
| 11 | S&F steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gradeSt.-240 complete all as specified and directed. |
| 12 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 13 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 14 | M&L for precast cement concrete block masonry 1:3:6 type C1 (20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 15 | M&L for preparation of newsteel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primeron steel surfaces complete all as specified and directed . |
| 16 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube and fix in opening as per specification and drawings complete all as specified and directed. |
| 17 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, etc complete all as specified and as directed. |
| 18 | Supply and fixing aluminium anodised (powder coated) Ventilator frame with Shutter(bottom Half Portion Fixedand top half portion with louver)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm outside vent with staple and suitable wall angle of size 25.4x25.40x1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. Section for frameshall be 63.5 X 38.1X 1.40mm thick complete all as specified and as directed. |
| 19 | Material and labour for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7mm/450 x 350 x 7 mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in CM 1:4complete all as specified and directed. |
| 20 | Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor over and including 15mm thick screed bed/bedding layer in CM 1:4complete all as specified and directed. |
| 21 | Supply and laying of Double wall corrugated, HDPE pipes 150 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 22 | M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C2 for 150 mm bore of pipe complete all as specified and directed. |
| 23 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. |
| 24 | S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 25 | S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 26 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 27 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 28 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers compete all as specified and directed. |
| 29 | Supply and fixed vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white withP or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) including provision of lean cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed. |
| 30 | S&F 10 litres capacityPVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern & fixing high or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 31 | M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed. |
| 32 | M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) finished even and smooth with out using extra cement mixed with liquid water proofing compound (for 5mm thick finishing layer only) 200 ml per 50 kg of cement by weight of cement or as per manufacturer\"s instructioncomplete all as specified anddirected. Note: Liquid water proofing compound will be measured and paid separately |
| 33 | Supply only liquid waterproofing compound |
| 34 | S&F 15mm dia Bib tap,fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 35 | S & F 15mm bore dia stop valves, fancy type, chromium plated with long shank and cup(concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed. |
| 36 | S&F 15 mm size stop valve, fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed complete all as specified and directed. |
| 37 | S&F 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 38 | S&FBrass chromium plated shower rose 125mm size, including fixing to steel pipe or union complete all as specified and directed. |
| 39 | S&F Brass Chromium Plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 40 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 41 | Material & Labour for preparation of new wall surface applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 42 | M&L for 75 mm thick cement concrete type C1 1:3:6using 20 mm graded stone aggregate as in plinth protection finished fair and even with using extra cementcomplete all as specified and directed. |
| 43 | M&L for cement concrete 1:2:4 type B-1, type B-1 using 20 mm graded stone aggregate in surface channels and drains complete all as specified and directed. |
| 44 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete/cement mortar 1:2:4 etc complete all as specified and directed. |
| 45 | S&F wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 46 | S&F PVC connection of size 15 mm dia, 450 mm long with PTMT nuts complete all as specified and directed. |
| 47 | M&L for Providing and fixing false ceiling of designer tiles(High Pressure steam cured) of 4 mm thickness (as per IS : 14862) of Size 595 X 595 mm and any of the design (Cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 grams, both side inclusive and black painted groove on all T webs) consisting of Main T runner with suitably spaced joints to get required length and 15 X 32 mm made from 0.30 mm thick sheet 1200 mm long spaced between main \"T\" at 600 mm C/C to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x20x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc Main \"T\" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instruction/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200 mm C/C along main \"T\", bottom exposed width of 15 mm of all \"T\" sections of 4 mm dia GI wire shall be pre-Painted with polyester paint and black painted groove at centre of Size 4mm depth and 4.5 mm width, all complete at all heights as per direction by Engr-In-Charge. |
| 48 | Supply and fixing of rotational moulded, multilayer HDPE water storage tank of 500 litres capacity( tripple layer wall construction, cylindrical vertical with closed top),ISI marked hoisted and fixed in position all as specified in SSR Part I including 02 Nos 20 mm bore full threaded GI nipple of required size including ball valves 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms including fixing of inlet, outlet & over flow pipe etc and 20 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 49 | S&F MS Plates (plain or chequered) channels, Fe 410-W(Gde-E-250) Quality-A, square cut or notched (ordinary and counter sunk) forming holes, with riveted ,bolted or welded attachment complete all as specified and directed. |
| 50 | M&L for acid resistance ceramic tiles (industrial type) as conform to IS: 4457 with chemical resistant mortar of size 300mm x 300mm x 8-10mm thick, suitable for hi-turf external tiles, anti skid, scratch resistance and neutral to UV rays and acid/alkali resistance as in floor over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 51 | Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 10 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve& all necessary civil works as required with all fittings, fixturesetc. complete all as specified and directed.Notes:-(i) PCC and earthwork shall be measured and paid separately. |
| 52 | M & L for construction of PCC (1:3:6, type C2) block masonry soak well of size 1.60 m dia and 3.00 m depth with all fittings and fixtures complete all as specified and shown on drawing No CESZ/2020/TD/45 sheet 1/2 to 2/2. |
| 53 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 54 | M&L for Mild steel TMT bars 6 to 8mm dia and over, cutto length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 55 | M&L for formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm (horizontal or sloping) thick;rough finished surfaces of concrete flat complete all as specified and directed |
| 56 | M&L for reinforced cement concrete 1:1.5:3 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 57 | Material and labour for point wiring for one light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed. |
| 58 | Material and labour for point wiring for one 3 pin 5 Amp socket outlet on independent board controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed. |
| 59 | M&L for point wiring with 2.5 sqmm FRLSH PVC insulated andsheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed. |
| 60 | Supply and fixing switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed and directed. |
| 61 | Supply and fixing switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered)with white colour complete all as specified/ directed. |
| 62 | Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered)with white colour complete all as specified and directed. |
| 63 | Supply and fixing ceiling rose surface 3Phase/PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 64 | Supply and fix MCB SPN DB 8 waydouble door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed. |
| 65 | Supply and fix MCB SPN 40 Amps,10 Ka, 240 voltscompleteall as specified and directed. |
| 66 | Supply and fix MCB SP 6 to 32Amps, 10 Ka, 240 volts completeall as specified and directed. |
| 67 | Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittingscomplete all as directed. |
| 68 | Supply and fixing LEDbatten fitting 1x18watts including tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and includingprovision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as specified and directed. |
| 69 | S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 70 | Supply and fix exhaust fan, metallic body AC single phase, 230V of size 300mm sweep with, blades, frame and louvers complete all as specified and directed by Engr-in-charge. |
| 71 | Material & labour for sub main wiring with two runs of single core, FRLSH 4 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly complete all as specified and directed. Note : Two run of 4 Sqmm cable, one run of casing capping and one run of 4 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 72 | Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed. |
| 73 | Supply and fixing of LED building security light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5KV and of capacity 40 W including GI bracket of 40mm pipe complete all as specified and directed. |
| 74 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.Note: The cost of necessary grouting/nuts, bolts, making good to disturbed surfaces, etc. are deemed to be inclusive in the unit quoted rate. |
| 75 | Supply, laying, testing & commissioning UG cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross section area 16 sq mm, 4.0 core complete all as specified and directed. |
| 76 | Supply & filling sand for cushioningto the under ground cable 8 cm before laying the electric cable and 15 cm after laying the cablecomplete all asspecified and directed.Note: Punned thickness shall be measured and paid under this item. |
| 77 | M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat complete all as specified and directed. |
| 78 | S&F GI light grade tube of size 80 mm bore with all fittings laid in trenches/ wall for protection of cable complete all as specified and directed. |
