|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group \"A\"). |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recess medium class PVC conduit as required. a) 2 x 4 sq. mm + 1 x 4 sq. mm |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recess medium class PVC conduit as required.a) 4 x 4 sq. mm + 2 x 4 sq. mm |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 6 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 7 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing &fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16amps modular switch, connection etc. as required. |
| 8 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 9 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 10 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) a) 6 way, Double door |
| 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole |
| 12 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 40 Amp |
| 13 | LED Down lighter (SMD Type) (System lumen efficacy ≥ 105< 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD typeof following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50Cto400C,internalsurge protectionof2.5KVwithShort&Opencircuit protection ,THD < 10% , P. F.≥0.95,IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%),life time (LED, Driver & electrical circuitry), of minimum50000 Burning Hours with70% of initial Lumenmaintained till life ends, CCT 3000°K /4000°K/ 5700°K / 6500°K (AsperANSIBin), SDCM (Standard Deviation Colour Matching) <3,Maximumpower consumptionshouldnotmorethan the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing Completeinallrespecti/cexternal connections with1.5sq.mmFRLS/HFFR,PVCinsulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty . |
| 14 | System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report andall testing requiredforLED fixtures as per BISshall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkof aluminium housing such that LED junction temperature shall not rise above 90°C) Powdercoateddiecast/Extruded aluminium Body including trim.a) 12 -15 watt |
| 15 | Supplying and fixing of 9/10 Watt LED lamp B-22 holder base on existing lamp holder etc. as required. (Make- Havells/ Bajaj/ Crompton/ Philips) |
| 16 | Supplying, installation, testing and commissioning of heavy duty exhaust fan metal type 300 mm sweep single phase 230 V, 50 Hz in the existing opening i/c connection etc as required. (Make- Havells /Bajaj/CG/Usha/ ISI marked) |
