|
| 1 | Providing, fabricating, and installing a thematic mural artwork constructed in FRP, with or without mixed media. The work shall incorporate materials suitable for outdoor applications such as ceramic, terracotta, and fiberglass, along with limited decorative elements including glass, acrylic, and metals in approved textures and finishes, all executed strictly as per the finalized and approved artwork concept.Select components may be executed in 3D to enhance depth, articulation, and thematic representation, subject to approval during the final design review. The mural design shall comprise both decorative and figurative elements.The mural shall include 2D and 3D components fabricated using fibre sheets (5–6 mm thickness) in medium or high relief, executed in accordance with the concept design provided by the consultant and produced as per approved shop drawings, sketches, prototype models, artwork references, and any additional visual documentation to be supplied by the vendor.Fabrication may be undertaken on-site, off-site, or through a combination of both, and the final assembled artwork shall be installed at designated locations as instructed. All works must comply with applicable standards for structural integrity, durability, and public safety.The artwork shall be mounted on an MS frame (2” x 2” section, 3 mm thickness), completed in alignment with the approved brief/theme/topic/ final concept/prototype/model, and construction drawings, under the direction and satisfaction of the Art Curator/Engineer-in-Charge.Mode of Measurement: Payment shall be based solely on the elevation area of the mural, irrespective of frame depth, corner detailing, or edge profile. The quoted rate shall be inclusive of all materials, labour, consumables, tools, scaffolding, transportation, loading/unloading, and all incidental charges required for fabrication, handling, assembly, and installation.THEME : Showcases traditional Etikoppaka and Kondapalli toys with temple door motifs from Kodanda Rama Temple.TOPIC : Bommala Parampara – Toy Traditions of Kadapa.•Please refer specifications and schematic drawings attached in the tender document while quoting the rate |
| 2 | Providing, fabricating, and installing a thematic mural artwork constructed in FRP, with or without mixed media. The work shall incorporate materials suitable for outdoor applications such as ceramic, terracotta, and fiberglass, along with limited decorative elements including glass, acrylic, and metals in approved textures and finishes, all executed strictly as per the finalized and approved artwork concept.Select components may be executed in 3D to enhance depth, articulation, and thematic representation, subject to approval during the final design review. The mural design shall comprise both decorative and figurative elements.The mural shall include 2D and 3D components fabricated using fibre sheets (5–6 mm thickness) in medium or high relief, executed in accordance with the concept design provided by the consultant and produced as per approved shop drawings, sketches, prototype models, artwork references, and any additional visual documentation to be supplied by the vendor.Fabrication may be undertaken on-site, off-site, or through a combination of both, and the final assembled artwork shall be installed at designated locations as instructed. All works must comply with applicable standards for structural integrity, durability, and public safety.The artwork shall be mounted on an MS frame (2” x 2” section, 3 mm thickness), completed in alignment with the approved brief/theme/topic/ final concept/prototype/model, and construction drawings, under the direction and satisfaction of the Art Curator/Engineer-in-Charge.Mode of Measurement: Payment shall be based solely on the elevation area of the mural, irrespective of frame depth, corner detailing, or edge profile. The quoted rate shall be inclusive of all materials, labour, consumables, tools, scaffolding, transportation, loading/unloading, and all incidental charges required for fabrication, handling, assembly, and installation.THEME : Depicts Lord Venkateswara framed within Veyyi Nuthula Kona gateway architecture.TOPIC : Gateway to Tirumala – Spiritual Iconography•Please refer specifications and schematic drawings attached in the tender document while quoting the rate |
| 3 | Providing, creating, and installing a fully hand-painted artwork on premium-grade canvas, including a suitably designed wooden support frame. The artwork shall be executed using professional acrylic paints and finished with a matte, clear protective varnish, strictly adhering to the finalized and approved concept artwork.The scope includes complete artistic execution and all associated requirements such as materials, consumables, tools, labour, packing, safe transportation, handling, and installation at the designated site.The completed artwork shall be mounted on a Mild Steel (MS) frame of 2” × 2” section with a minimum 3.0 mm thickness, fitted with 12 mm thick waterproof plywood cladding of an approved brand. The reverse surface of the plywood shall receive one coat of approved wood primer and anti-termite treatment. Installation shall incorporate all necessary openings, recesses, access points, and service holes required for integration with site services and final positioning.The work shall be executed as per the approved brief, design direction, artistic theme/intent, mock-up/prototype (where applicable), final working drawings, and instructions issued by the Art Curator and/or Engineer-in-Charge (EIC).Mode of Measurement: Measurement shall be based solely on the elevation area of the artwork, irrespective of the depth of frame, backing substrate, or edge profile. The quoted rate shall be inclusive of complete artistic execution and all associated requirements such as materials, labour, consumables, equipment, scaffolding, transportation, handling, and installation-related requirements.THEME :Panoramic mural of Gandikota Fort, Penna River, and canyon landscapes.TOPIC : Gandikota – The Grand Canyon of India•Please refer specifications and schematic drawings attached in the tender document while quoting the rate. |
| 4 | Providing, creating, and installing a fully hand-painted artwork on premium-grade canvas, including a suitably designed wooden support frame. The artwork shall be executed using professional acrylic paints and finished with a matte, clear protective varnish, strictly adhering to the finalized and approved concept artwork.The scope includes complete artistic execution and all associated requirements such as materials, consumables, tools, labour, packing, safe transportation, handling, and installation at the designated site.The completed artwork shall be mounted on a Mild Steel (MS) frame of 2” × 2” section with a minimum 3.0 mm thickness, fitted with 12 mm thick waterproof plywood cladding of an approved brand. The reverse surface of the plywood shall receive one coat of approved wood primer and anti-termite treatment. Installation shall incorporate all necessary openings, recesses, access points, and service holes required for integration with site services and final positioning.The work shall be executed as per the approved brief, design direction, artistic theme/intent, mock-up/prototype (where applicable), final working drawings, and instructions issued by the Art Curator and/or Engineer-in-Charge (EIC).Mode of Measurement: Measurement shall be based solely on the elevation area of the artwork, irrespective of the depth of frame, backing substrate, or edge profile. The quoted rate shall be inclusive of complete artistic execution and all associated requirements such as materials, labour, consumables, equipment, scaffolding, transportation, handling, and installation-related requirements.THEME : Depicts performing arts – Kuchipudi, Vilasini Natyam, Bharatanatyam, and Burra Katha – in Tholu Bommalata shadow styleTOPIC :Storytelling Traditions of Kadapa•Please refer specifications and schematic drawings attached in the tender document while quoting the rate |
| 5 | Providing, creating, and installing a fully hand-painted artwork on premium-grade canvas, including a suitably designed wooden support frame. The artwork shall be executed using professional acrylic paints and finished with a matte, clear protective varnish, strictly adhering to the finalized and approved concept artwork.The scope includes complete artistic execution and all associated requirements such as materials, consumables, tools, labour, packing, safe transportation, handling, and installation at the designated site.The completed artwork shall be mounted on a Mild Steel (MS) frame of 2” × 2” section with a minimum 3.0 mm thickness, fitted with 12 mm thick waterproof plywood cladding of an approved brand. The reverse surface of the plywood shall receive one coat of approved wood primer and anti-termite treatment. Installation shall incorporate all necessary openings, recesses, access points, and service holes required for integration with site services and final positioning.The work shall be executed as per the approved brief, design direction, artistic theme/intent, mock-up/prototype (where applicable), final working drawings, and instructions issued by the Art Curator and/or Engineer-in-Charge (EIC).Mode of Measurement: Measurement shall be based solely on the elevation area of the artwork, irrespective of the depth of frame, backing substrate, or edge profile. The quoted rate shall be inclusive of complete artistic execution and all associated requirements such as materials, labour, consumables, equipment, scaffolding, transportation, handling, and installation-related requirements.THEME :Integrates Kalamkari, Vijayanagara motifs, chariot wheels, Lakulisha sculpture, Tholu Bommalata figures, and sari designs.TOPIC : Arts & Crafts of Kadapa•Please refer specifications and schematic drawings attached in the tender document while quoting the rate. |
| 6 | Providing, fabricating, and installing a thematic mural artwork constructed in FRP, with or without mixed media. The work shall incorporate materials suitable for outdoor applications such as ceramic, terracotta, and fiberglass, along with limited decorative elements including glass, acrylic, and metals in approved textures and finishes, all executed strictly as per the finalized and approved artwork concept.Select components may be executed in 3D to enhance depth, articulation, and thematic representation, subject to approval during the final design review. The mural design shall comprise both decorative and figurative elements.The mural shall include 2D and 3D components fabricated using fibre sheets (5–6 mm thickness) in medium or high relief, executed in accordance with the concept design provided by the consultant and produced as per approved shop drawings, sketches, prototype models, artwork references, and any additional visual documentation to be supplied by the vendor.Fabrication may be undertaken on-site, off-site, or through a combination of both, and the final assembled artwork shall be installed at designated locations as instructed. All works must comply with applicable standards for structural integrity, durability, and public safety.The artwork shall be mounted on an MS frame (2” x 2” section, 3 mm thickness), completed in alignment with the approved brief/theme/topic/ final concept/prototype/model, and construction drawings, under the direction and satisfaction of the Art Curator/Engineer-in-Charge.Mode of Measurement: Payment shall be based solely on the elevation area of the mural, irrespective of frame depth, corner detailing, or edge profile. The quoted rate shall be inclusive of all materials, labour, consumables, tools, scaffolding, transportation, loading/unloading, and all incidental charges required for fabrication, handling, assembly, and installation.THEME : Ensemble of classical musicians with veena, mridangam, tanpura, and ravanayantram.TOPIC : Carnatic Music Tradition.•Please refer specifications and schematic drawings attached in the tender document while quoting the rate. |
| 7 | Providing, creating, and installing a fully hand-painted artwork on premium-grade canvas, including a suitably designed wooden support frame. The artwork shall be executed using professional acrylic paints and finished with a matte, clear protective varnish, strictly adhering to the finalized and approved concept artwork.The scope includes complete artistic execution and all associated requirements such as materials, consumables, tools, labour, packing, safe transportation, handling, and installation at the designated site.The completed artwork shall be mounted on a Mild Steel (MS) frame of 2” × 2” section with a minimum 3.0 mm thickness, fitted with 12 mm thick waterproof plywood cladding of an approved brand. The reverse surface of the plywood shall receive one coat of approved wood primer and anti-termite treatment. Installation shall incorporate all necessary openings, recesses, access points, and service holes required for integration with site services and final positioning.The work shall be executed as per the approved brief, design direction, artistic theme/intent, mock-up/prototype (where applicable), final working drawings, and instructions issued by the Art Curator and/or Engineer-in-Charge (EIC).Mode of Measurement: Measurement shall be based solely on the elevation area of the artwork, irrespective of the depth of frame, backing substrate, or edge profile. The quoted rate shall be inclusive of complete artistic execution and all associated requirements such as materials, labour, consumables, equipment, scaffolding, transportation, handling, and installation-related requirements.THEME : Portrait assembly of Annamacharya, Veerabrahmam, Yogi Vemana, Ramanujacharya, and others.TOPIC : Spiritual Luminaries of Kadapa•Please refer specifications and schematic drawings attached in the tender document while quoting the rate. |
| 8 | Providing, fabricating, and installing a thematic mural artwork constructed in FRP, with or without mixed media. The work shall incorporate materials suitable for outdoor applications such as ceramic, terracotta, and fiberglass, along with limited decorative elements including glass, acrylic, and metals in approved textures and finishes, all executed strictly as per the finalized and approved artwork concept.Select components may be executed in 3D to enhance depth, articulation, and thematic representation, subject to approval during the final design review. The mural design shall comprise both decorative and figurative elements.The mural shall include 2D and 3D components fabricated using fibre sheets (5–6 mm thickness) in medium or high relief, executed in accordance with the concept design provided by the consultant and produced as per approved shop drawings, sketches, prototype models, artwork references, and any additional visual documentation to be supplied by the vendor.Fabrication may be undertaken on-site, off-site, or through a combination of both, and the final assembled artwork shall be installed at designated locations as instructed. All works must comply with applicable standards for structural integrity, durability, and public safety.The artwork shall be mounted on an MS frame (2” x 2” section, 3 mm thickness), completed in alignment with the approved brief/theme/topic/ final concept/prototype/model, and construction drawings, under the direction and satisfaction of the Art Curator/Engineer-in-Charge.Mode of Measurement: Payment shall be based solely on the elevation area of the mural, irrespective of frame depth, corner detailing, or edge profile. The quoted rate shall be inclusive of all materials, labour, consumables, tools, scaffolding, transportation, loading/unloading, and all incidental charges required for fabrication, handling, assembly, and installation.THEME : Composite of temple landscapes – Siddhavatam, Devuni Kadapa, Vontimitta, Pushpagiri, Nandalur – integrated with deity sculptures.TOPIC : Aastha & Culture – Dharmik Landscape•Please refer specifications and schematic drawings attached in the tender document while quoting the rate. |
