|
| 1 | Items : |
| 2 | Dismantling / Dimolition of Concrete of any description and in any position not otherwise specifically provided for and removing excavated material exc 250 m but n exc 500 m etc. complete as per SSR 2020. |
| 3 | M & L broken stone hardcore of gauge n exc 63 mm deposited , spread & levelled in layers n exc 15 cm thick, watered and rammed to a true surfaceetc complete as per SSR 2020. |
| 4 | Plain Cement Concrete in foundation , filling and mass concrete type C2 1:3:6 (40 mm Graded aggregate)etc complete as per SSR 2020. |
| 5 | Reinforced cement concrete type B1 1:2:4 (20 mm graded) in foundations , footings and mass concrete etc complete as per SSR 2020. |
| 6 | Excavation over areas in soft loose soilexc 1.5 m deep including including levelling, watering and well ramming with rolling in layers not exc 25 cm etc complete as per SSR 2020 & as directed by EIC. |
| 7 | Reinforced cement concrete type B1 1:2:4 (20 mm graded) in beams, cantilevers, lintels etc complete as per SSR 2020. |
| 8 | Reinforced cement concrete type B1 1:2:4 (20 mm graded) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the likeetc complete as per SSR 2020. |
| 9 | Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixedetc complete as per SSR 2020. |
| 10 | Cement concrete in foundations, filling and mass concrete B2 1:2:4 (40mm graded) in foundations , footings and mass concrete etc complete as per SSR 2020. |
| 11 | Formwork to flat sides of concrete foundation, footings, bases of columns, rafts and raft beams of foundation and plinth beams etc complete as per SSR 2020. |
| 12 | Brickwork in 1:4 cement mortar with subclass \"B\" Bricks exc 6 m mean etc complete as per SSR 2020. |
| 13 | Formwork to flat sides of concrete foundation, footings, bases of columns, rafts and raft beams of foundation and plinth beams etc complete as per SSR 2020. |
| 14 | Formwork to flat sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves, including supports, overhangs, etc.also splays between floors and beams etc complete as per SSR 2020. |
| 15 | Formwork to soffits of suspended flat slabs such as roof slabs, floor slabs,floor slabs, landings, and similar work not exceeding 200 mm thickness etc complete as per SSR 2020. |
| 16 | Form work to sides of (flat) pillars, posts, struts, piers, columns and stanchions square, reactangular or polygonal etc complete as per SSR 2020. |
| 17 | M & L Deformed or twisted mild steel bars 10mm dia & over cut to length bend to shape reqiured including cranking bending spirally etc complete as per SSR 2020 |
| 18 | Ditti, but Deformed or twisted mild steel bars 6mm to 8 mm dia , quality conforming to etc complete as per SSR 2020. |
| 19 | Rendering 15 mm thick in 1:4 cement mortar on fair faces of brick work, walls & concrete surfaces finished even & smooth without using extra cement etc complete as per SSR 2020. |
| 20 | Rendering 15 mm thick in 1:4 cement mortar on fair faces of brick work & concrete surfaces including neeru finish etc completeas per SSR 2020. |
| 21 | Screed bed or bedding layer of mortar 1:6, 20mm thick for laying floor finishes, M & L, as per SSR 2020. |
| 22 | S&F, Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shed, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc complete as per SSR 2020. |
| 23 | S & F Plain framed panalled shutters 40mm (any number of panels), with panel of Timber flat on both sides (feather edged). All wood is of Ist class hard wood(Seasoned Teak wood). Any number of shutters in each opening & thickness of shutter 40mm etc complete as per SSR 2020. |
| 24 | S & F of Ist class hardwood in plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete as per SSR 2020. |
| 25 | Butt hinges, heavy weight, cold rolled mild steel, and fixed 100mm etc complete as per SSR 2020. |
| 26 | Mild steel sliding door bolts 150mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed etc complete as per SSR 2020 |
| 27 | Mild steel pressed handles, oval type, stove enamelled black 100 mm etc complete as per SSR 2020 |
| 28 | Preparation of new surface of any description, Painting 2 coats of synthetic enamel paint over one coat ofzinc chromate primer etc complete as directed by E-in-C. |
| 29 | Prepation of old painted surfaces of brick, stone, concreate or plaster surfaces of any discripation not otherwise descirbe, over 10 CM width or Grith & application of 02 coats of cement paint over one coat of primer etc complete as per SSR 2020. |
| 30 | Dismantling Stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars, etc, and disposing of rubbish as per SSR 2020. |
| 31 | soling or sub base with 200 mm & above size broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber etc complete as per SSR 2020. |
| 32 | Walling of Random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, cement mortar as per SSR 2020. |
| 33 | Broken glass coping on top of walls in 1:3 cement mortar etc complete as per SSR 2020. |
| 34 | M&L, Struck pointing to block in course or ashlar masonry or concrete block walling in 1:4 cement mortar etc complete as per SSR 2020. |
| 35 | S&F, Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe 410-W (Gde- E 250) quality A) etc. complete as per SSR 2020. |
| 36 | S&F, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. fixed in repairs as directed ettc. complete as pe SSR 2020. |
| 37 | Restraining securing & making good Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed etc. complete as per SSR 2020 |
| 38 | Preparing surfaces, plastered or unplastered on old walls applying one coat primer with alkali resistent priming paint & two coat of distemper oil emulsion etc complete as per SSR 2020 |
| 39 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint (Exterior weather proof emulsion) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & ungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces; M&L, etc complete as per SSR 2020. |
| 40 | Preparing surfaces, plastered or unplastered on old ceilings and applying one coat primer with alkali resistence paint & two coat distemper oil emulsion etc complete as per SSR 2020. |
| 41 | Surface dressing in soft loose soil n exc 15 cm including removing of grass and bushes etc complete as per SSR 2020. |
| 42 | S&F of motorised powder coated laser cut gate in opening of size 6.30 m x 1.80m in two leafs with frame comprising of heavy duty rectangular pipe of size 150mm x 75 mm along with MS plate 3.5mm thick CNC cut of approved pattern design encarved within. Provision of four wheels of 100 mm dia with end brackets of size 0.45 m x 0.60 m (along with both arrangement manual and motor operated) sliding gate motor SLG-Y-600) having 600 kg, power supply 230VAC, frequency 50Hez torque 22 NM, speed up to 12 m/mm complete with all fittings and 04mm copper cable connection and entrance of main gate and material gate at OFV |
| 43 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 44 | S&F Three track epoxy powder coated aluminium sliding windows with 5 mm thick modi tinted glass shutter in two tracks & powder coated stainless steel wire mesh shutter in third track having 18 mm series, three track bottom weight 0.830Kg 20 mm series, three track top & side bottom section weight 0.800 Kg/Rm, bearing bottom section weight 0.460Kg/Rm, Handle Section Weight 0.410Kg/Rm etc complete with all fittings beeding rubber strip locking arrangement etc. complte as directed by EIC. |
