|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | Dismantling stone slab roofing over wooden karries or R.C.C.battens (dismantling karries and battern to be paid for seperately) including staking of serviceble material and disposal of unserviceble material within 50 metres lead as per direction of Engineer-in-charge. |
| 3 | Demolishing cement concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceble material and disposal of unservicble material within 50 mertes lead. |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceble material and disposal of unserviceble material within 50 metres lead as per direction of Engineer-in-charge. : In cement mortar. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level: 1:2:4 (1 Cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size. |
| 8 | Removing dry or oil bound distemper by scarapping,sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete. |
| 9 | Dismantling aluminium/Gypsum partitions,doors,windows,fixed glazing and false ceiling including disposal of unserviceable surplus material and stackig ofmaterial and stacking of serviceble material with in 50 metres lead as directed by Engineer-in-charge. |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) havingVOCcontentlessthan50gms/litre,ofapproved manufacturer,ofrequiredshadeandcolourcomplete,asper manufacturer’s specification. Two or more coats on new work |
| 12 | Demolishing mud phaska in terracing and disposal of materialwithin 50 meters lead. |
| 13 | Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers. |
| 14 | Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access plateform. |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coarse aggregate as well as fine agreement derived from natural sources and cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishingandreinforcement,includingadmixturesin recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more. |
| 17 | 6 mm cement plaster to ceiling of mix :1:3 (1 cement :3 fine sand) |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption\"s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete; Size of Tile 60x60 mm |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours such as White, Ivory, Grey, Fume Red Brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. |
| 22 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with gery cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with Base of cement mortar 1:4 (1 cement :4 coarse sand) :25 mm thick |
| 23 | Kota stone slabs 20 mm thick in risers of steps,skirting,dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete. |
| 24 | 12 mm cement plaster of mix :1:4 (1 cement :4 coarse sand) |
| 25 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement :4 coarse sand) |
| 26 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main \"T\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33 mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross \"T\" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main\"T\" at 600mm centre to centre to form a grid of 1200x600mm and secondary cross \"T\" of length 600mm and size 24 x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600mm panel to from grid of size 600x600mm, resting on periphery walls /partitions on a Perimeterwalll angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid including, cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., whereever required, Main \"T\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200mm centre to centre along main \"T\" , bottom exposed with 24mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. |
| 27 | Mirror polishing on marble work /Granite/ stone work wherever required to give high gloss finish complete. |
| 28 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sectios/ appropriate Z secions and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/penelling, C.P.brass/stainless steel screws, all complete as per architectual drawings and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately):For fixed portion; Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 29 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sectios/ appropriate Z secions and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminiuum snap beading for glazing/penelling, C.P.brass/stainless steel screws, all complete as per architectual drawings and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately); Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 30 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade) particle board Grade I,Type II conforming to IS :12823 in panelling fixed in alluminium doors,windows shutters and partition frames with C.P.brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge:Pre-laminated particle board with decorative lamination on one side and balancing laminatioin on other side. |
| 31 | Providing and fixing glazing in aluminium door,windows,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc.complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness. |
| 32 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS :6315 marked, for doors including cost of cutting floors as required,embedding in floors and cover plates with brass pivot and single piece M.S.sheet outer box with slide plate etc.complete as per the direction of Engineer-in-charge:With brass cover plate |
| 33 | Providing and fixing IS :3563 marked Aluminium die cast body tubular type universal hydraulic door closer necessary accessories and screws etc.complete. |
| 34 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per dirction of Engineer-in-charge; Anodised (AC 15) aluminium tubular bar |
| 35 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc.complete : 125 mm |
| 36 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc.complete : 100 mm |
| 37 | Providing and fixing ISI marked aluminium sliding door boltsISI marked anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts andscrews etc. complete : 250x 16 mm |
| 38 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 250 x 10 mm |
| 39 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200 x 10 mm |
| 40 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 41 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works. |
| 42 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \"L\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge |
| 43 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 44 | Applying priming coat : With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
| 45 | Painting with synthetic enamle paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 46 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 47 | Providing and fixing 18 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen plateforms, vanity counter facias and similar locations of required size of approved shade colour and texture laid over 20 mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels: Granite of any colour and shade; Area of slab over 0.50 sqm. |
| 48 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations.a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with proprietary water proofing compound conforming to IS. 2645 over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1 :5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1 :5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm admixed with water proofing compound conforming to IS: 2645 and approved by the Engineer-in-charge.d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1 :4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by the Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making of 300x300 mm square 3 mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. :With average thickness of 120mm and minimum thickness at khurra as 65 mm. |
| 49 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement :4 coarse sand) |
| 50 | Providing and fixing fly proof galvanised M.S.wire gauze to windows and clerestory windows using galvanised M.S. wire gauze with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all completeWith 12 mm mild steel U beading |
| 51 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 52 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C.pan of size 580 x 440 mm with integral type foot rests |
| 53 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixture complete including cutting and making good the walls and floors wherever required : W.C.pan with ISI marked white solid plastic seat and lid |
| 54 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively. |
| 55 | Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White vitreous China; Wash basin size 630 x 450 mm with a single 15 mm C.P.brass pillar taps |
| 56 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS :13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board; 610 x 460 mm bowl depth 200 mm |
| 57 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete:10 litre capacity -White |
| 58 | Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C.waste fittings complete: Semi rigid pipe; 32 mm dia |
| 59 | Providing and fixing uplasticised PVC connection pipe with brass unions: 30 cm length; 15 mm nominal bore |
| 60 | Providing and fixing mirror of superior glass (of approved quality) nad of required shape and size with plastic molded frame of approved make and shade with 6 mm thick hard board backing: Circular shape 450 mm dia |
| 61 | Providing and fixing PTMT bib cock of approved quality and colour: 15mm nominal size, 165 mm long, weighing not less than 110gms. |
| 62 | Providing and fixing PTMT stop cock of approved quality and colour:15mm nominal size, 86mm long, weighing not less than 88gms |
| 63 | Providing and fixing PTMT angle stop cock 15 mm nominal size weighing not less than 85 gms. |
| 64 | Providing and fixing PTMT 15 mm Urinal spreader size 95 x 69 x 100 mm with ½\" BSP thread and shapes, weighing not less then 60 gms. |
| 65 | Providing and fixing PTMT urinal cock of approved quality and colour and make : 15 mm nominal size 80 mm long, 44 mm high and 30 mm wide with BSP female threads weighing not less then 48 gms. |
| 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge; Concealed work including cutting chases and making good the walls etc.; 20 mm nominal outer dia Pipes. |
| 67 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting and making good the walls etc.; Internal work -Exposed on wall; 15 mm dia.nominal bore |
| 68 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting and making good the walls etc.; Internal work -Exposed on wall; 20 mm dia nominal bore |
| 69 | Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting and making good the walls etc.; Internal work -Exposed on wall; 25 mm dia nominal bore |
| 70 | Providing and fixing G.I.Union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (new work): 15 mm nominal bore |
| 71 | Providing and fixing G.I.Union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (new work): 20 mm nominal bore |
| 72 | Providing and fixing G.I.Union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (new work): 25 mm nominal bore |
| 73 | Providing and placing on terrace (at all floor levels) Polythylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 74 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball: 15 mm nominal bore,105 mm long weighing not less than 138 gms. |
| 75 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour: 15 mm nominal size weighing not less than 32 gms. |
| 76 | Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposingl of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. |
| 77 | Constructing brick masonry road gully chamber 50 x 45 x 60 cm with bricks of class designation 75 in cement mortar 1:5 (1 cement :5 Coarse sand) including 500 x 450 mm precast R.C.C.horizontal grating with frame completes as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 78 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement,foundation concrete 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement allcomplete as per standard design:0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the exernal surface shall be paid for separately); With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 79 | Providing and fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion: (i) Single socketed pipes; 110 mm diameter |
| 80 | Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised -Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:Coupler;110 mm |
| 81 | Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised -Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion: Single tee without door;110x110x110 mm |
| 82 | Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised -Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:Bend 87.5o;110 mm bend |
| 83 | Providing and fixing ball valve (brass) of approved quality complete: High or low pressure with plastic floats; 15 mm nominal bore |
| 84 | Providing and fixing ball valve (brass) of approved quality complete: High or low pressure with plastic floats; 20 mm nominal bore |
| 85 | Carriage of material by mechanical transport including loading, unloading and stacking complete; Lime, moorum, building rubbish, earth, manure or sludge and excaveted rock :Lime, moorum, building rubbish ;17 km lead |
| 86 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6 mm with 40 mm dia, steel pulleys complete with bolts,nuts,locking arrangement,stoppers,handles,including applying a priming coat of approved steel primer. |
| 87 | Structural steel work in single section fixed without connecting plate including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete. |
| 88 | Providing sand stone slab for roofing and laying them in cement mortar 1:4 (1 cement :4 coarse sand) over wooden karries or R.C.C.battens (Karries and battens to be paid seperately) including pointing the ceiling joints with cement mortar 1:3 (1 cement :3 fine sand) complete: Red sand stone slab;40 mm thick |
| 89 | Grading roof for water proofing treatment with : cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) |
| 90 | Neat cement punning. |
