|
| 1 | Maintenance and servicing of DG set 250 KVA, Make: greaves Ltdincluding replacment of defective/wornout spares with new spares such as fuel filter, lube oil filter, gaskets, V belts, rubber hoses with clamps, nuts bolts and cleaning of alternator with vaccum cleaner and replacement of engine oil, tappet setting , servicing of radiator etc for the smooth operation DG setall as specified and as directed.NOTE :- 1) Replacement of spares such as fuel filters and oil filter including nut, bolts, washers, clamps, screws and grease etcrequired for the service / maintenance of the DG sets deemed to be included in the above quoted rate. 2) Other spares required for abovewill be measured and paid separately under relevent items of Sch. Location: Yerwada pump house. |
| 2 | Description all as item No.1 above but 100 to 125 KVA make kirloskar cummins installed at computer centre and indoor stadium at at BEG & Centre. |
| 3 | Description all as item No.1above but 50 to 70 KVA make kirloskar installed at TB-II P/H, ADG office, Rashmi, Khadki and Sarvatra Vihar P/H |
| 4 | Description allas item No.1above but 30 to 40 KVA make kirloskarinstalledat shooting gallery TB-II, RA Line P/H, telephone exchange, CIMT TB-II, KKD Line P/H, Ajit Vihar P/H, Dunkirk Line P/H and Nirikshan Vihar. |
| 5 | Description allas item No.1above but 15 to25 KVA make kirloskarinstalledat depot Bn sub stn,TB-I Pump House, depot Bn pump house,baffle range,birajdar P/H, dunkirk line MAP-II P/H, shylhet mess TB-I and engine house road. |
| 6 | Supply only air filter inner and outer for 250 KVA DG set Greaves Ltd complete all as specified and as directed. |
| 7 | Supply only airfilter inner and outer for 100 to 125KVA DG set Kirloskar cummins complete all as specified and as directed . |
| 8 | Supply only airfilter inner and outer for 50 to 70 KVADG set complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 9 | Supply onlyairfilter inner and outer for 30 and 40 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 10 | Supply onlyair filter inner and outer for 15 to25 KVA DG set complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 11 | Supply onlyfan belt for 250 KVA DG set, complete all as specified and as directed . MAKE :- JK/Dunlop or equivalent |
| 12 | Supply only fan belt for 110 to 125 KVA DG set, complete all as specified and as directed . MAKE :- JK/Dunlop or equivalent |
| 13 | Supply onlyfan belt for 50 to 70 KVA DG set, complete all as specified and as directed . MAKE :- JK/Dunlop or equivalent |
| 14 | Supply onlyfan belt for 30 to 40 KVA DG set, complete all as specified and as directed . MAKE :- JK/Dunlop or equivalent |
| 15 | Supply onlyfan belt for 15 to 25 KVA DG set, complete all as specified and as directed . MAKE :- JK/Dunlop or equivalent |
| 16 | Supply only fuel actuator with O ringfor 250 KVA DG set, complete all as specified and as directed . MAKE :- Greaves or equivalent |
| 17 | Supply only fuel actuator with O ringfor 100 to 125 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 18 | Supply only fuel actuator with O ringfor 50 to 70 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 19 | Supply only fuel actuator with O ringfor 30 to 40 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 20 | Supply only fuel actuator with O ringfor 15 to 25 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 21 | Supply only ignition switch with keyfor 100 to 250 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 22 | Supply only ignition switch with keyfor 15 to70 KVA DG set, complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 23 | Supply onlycoolant temperature sensor with guagefor 100 KVA to 250 KVA DG set complete all as specified and as directed . . |
| 24 | Supply onlycoolant temperaturesensor with guagefor 15 KVA to 100 KVA DG set complete all as specified and as directed . |
| 25 | Supply onlylube oil pressuresensor(Oil safety control) for 100 to 250 KVA DG set complete all as specified and as directed . |
| 26 | Supply onlylube oil pressuresensor(Oil safety control) for 50 to 70 KVA DG set complete all as specified and as directed . . |
| 27 | Supply onlylube oil pressuresensor(Oil safety control) for 30 to 40 KVA DG set complete all as specified and as directed . |
| 28 | Supply onlylube oil pressuresensor (Oil safety control) for 15 to 25 KVA DG setcomplete all as specified and as directed . |
| 29 | Supply only Hose set with clamps and screws suitable for DG set 250 KVAcomplete all as specified and as directed . MAKE :- Greaves Ltd or equivalent |
| 30 | Supply only hose set with clamps and screws suitable for DG set 100 KVA to 125 KVA complete all as specified and as directed . MAKE :- Kirloskar or equivalent . |
| 31 | Supply only hose set with clamps and screws suitable for DG set 50 to 70KVA complete all as specified and as directed . MAKE :- Kirloskar or equivalent . |
| 32 | Supply only hose set with clamps and screws suitable for DG set 30 to 40KVA complete all as specified and as directed . MAKE :- Kirloskar or equivalent . |
| 33 | Supply only hose set with clamps and screws suitable for DG set 15 to 25 KVA complete all as specified and as directed . MAKE :- Kirloskar or equivalent |
| 34 | Supply and replacement of self starter 12 volt dc including testing and commissioning as all specified and directed. MAKE :- Lucas/Mico or equivalent |
| 35 | Supply and replacement of self starter 24 volt dcincluding testing and commissioning as all specified and directed. MAKE :- Lucas/Mico or equivalent |
| 36 | Supply and replacement of heavy duty battery terminals brass with copper lead PVC insulated multi stranded 25 sq mm duly soldered for +ve and -ve,05 mtr to 1.2 mtr longfor 12/ 24 volt batteries complete all as specified and as directed . |
| 37 | Supply and fixing heating proof asbestos rope 12 mm dia on engine exhaust pipe including dismantling of burn out asbestors rope and arresting all leakages by welding / tightening the exhaust line including aluminium cladding and making complete fire proof, flame proof complete all as specified and as directed . |
| 38 | Preparation of old painted surface of the DG set installed in acuastic enclosure including base frame, radiator, fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos, descriptions, location, capacity etc on DG set size of letter shall be 5 CMx5CM of capacity 15 KVA to 70 KVA complete all as specified and as directed . |
| 39 | Preparation of old painted surface of the DG Sset including base frame, radiator, suel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos, description, location, capacity etc on DG set size of letter shall be 5CMx5CM of capacity 100 KVA to 250 KVA complete all as specified and as directed . |
| 40 | Supply and replacement of anti vibration pad as per existing size and make complete all as specified and as directed . |
| 41 | Descaling, cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 15 KVA to 70 KVA complete all as specified and as directed . |
| 42 | Descaling, cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 100 KVA to 250 KVA complete all as specified and as directed . |
| 43 | Supply and fixin replacement/ topping up of coolant for radiators as approved complete all as specified and as directed .MAKE :- Bosch or equivalent . |
| 44 | Supply and fix oil pressure gauge for 100 KVA to 250 KVA complete all as specified and as directed . |
| 45 | Supply and fix oil pressure gauge for 15 KVA to 70 KVAcomplete all as specified and as directed . |
| 46 | Supply and replacement of hour run meter with hour counter complete all as specified and as directed . |
| 47 | Supply and filling / topping up engine oil multi grade as per manufacturers recommendations in engine all as specified and as directed. MAKE :- (ELF Oil/ Castrol /HP) including draining out old and burned engine oil. |
| 48 | Overhauling of FIP (fuel Injection pump) at work shop including replacement of small spares required, complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 100 KVA to 250 KVA complete all as specified and as directed . |
| 49 | Overhauling of FIP ( fuel injection pump ) at work shop including replacement of small spares required, complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 15 KVA to 70 KVA complete all as specified and as directed . |
| 50 | Supply and replacement of locks and keys for aquastic enclosures as per samples complete all as specified and as directed . |
| 51 | Supply and replacement of control pannel complete suitable for 100 KVA to 250 KVA DG Set complete all as specified and as directed . |
| 52 | Supply and replacement of control pannel complete suitable for 15 KVA to 70 KVA DG Set complete all as specified and as directed . |
| 53 | Supply and replacement of AVR (automatic voltage regulator ) suitable for DG set 100 KVA to 250 KVA complete all as specified and as directed . |
| 54 | Supply and replacement of AVR (automatic voltage regulator ) suitable for DG set 50 KVA to 70 KVA complete all as specified and as directed . |
| 55 | Supply and replacement of AVR (automatic voltage regulator ) suitable for DG set 15 KVA to 40 KVA complete all as specified and as directed . |
| 56 | Material and labour for rewinding, varnishing and insulation and drying of AC alternator stator including transportation from site to wksp and back complete all as specified and as directed . |
| 57 | Material and labour for winding, varnishing and insulation ofrotor including trasportation from site to wksp and back complete all as specified and as directed . |
| 58 | Supply and fix fuel hose for any capacity DG set 1 mtr to 2 mtr for fuel tank to DG set complete all as specified and as directed . |
| 59 | Material and labour for calibration offuel feed pump for any capacity of DG set complete all as specified and as directed . |
| 60 | Supply and fix 4 pole power contactor, 415Volts, 60 amps, incl dismantling taking down unsv one,complete all as specified and as directed .MAKE :- L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider |
| 61 | Supply and fix 4 pole power contactor, 415Volts, 100 to 160amps, incl dismantling taking down unsv one,complete all as specified and as directed .MAKE :- L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider |
| 62 | Supply and fix SMPS 12 vots 10 amp for 15 to 70 KVA DG setcomplete all as specified and as directed . |
| 63 | Supply and fix SMPS 24 volts 10 amp 100 to 250 KVA DG setcomplete all as specified and as directed . |
| 64 | Supply and fix rectifier diodeassembly 15 to 70 KVA DG set complete all as specified and as directed . |
| 65 | Supply and fix rectifier diodeassembly 100 to 250 KVA DG set complete all as specified and as directed . |
| 66 | Repair of turbocharging with repair Kit 100 to 250 KVA DG set complete all as specified and as directed . |
| 67 | Repair of turbocharging with repair Kit 15 to 70 KVA DG set complete all as specified and as directed . |
| 68 | Supply and fix in replacement of Fuel injection pump assly make Stanadyne for DG set from 70 kVA to 250kVAcomplete all as specified and as directed . |
| 69 | Supply and fix inreplacementof fuel injector assembly for DG set from 15 to 70 kVA complete all as specified and as directed . |
| 70 | Supply and fix in replacement of crank shaft assembly for cummins make DG set from 70 kVA to 250kVA Model NTC 495 with bearings & sealcomplete all as specified and as directed . |
| 71 | Supply and fix in replacement ofcam shaft assly for cummins make DG set 15 to 70 kVA model NTC 495 with bushings & Seal complete all as specified and as directed. |
| 72 | Supply and fixin replacement of push rod for cummins make DG set model NTC 495 complete all as specified and as directed. |
| 73 | Supply and fix cylinder head gasket set for cummins make DG set Model NTC 495 complete all as specified and as directed. |
| 74 | Supply and fix in replacement of piston assly with ring set of 70 to 250 KVA DG set engine complete all as specified and as directed. |
| 75 | Supply and fix in replacement of piston assly with ring set of 15 to 70 KVA DG set engine complete all as specified and as directed. |
| 76 | Supply and fix in replacement of liner with gaskit of 15 to 70 KVA DG set engine complete all as specified and direct by Engr-in-Charge |
| 77 | Supply and fix in replacement of liner with head and gaskit of suitable size of 70 to 250 KVA DG set engine complete all as specified and as directed. |
| 78 | Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr longburied directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised iron 32x6mm strip as earthing lead, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completionall as specified and as directed.. |
| 79 | Material and labour for GI tubing light grade 40/50mm bore, ISI marked, for cable protection complete all as specified and as directed. |
| 80 | Material and labour for PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of DG set, panel board,repairs to road cutting, drain, path etc complete all as specified and as directed. |
| 81 | Material and labour for PCC (1:2:4) type B-1 using 20mm graded aggregate a of reconstruction old damaged copings of DG set/ panel etc, including necessary form work complete all as specified and as directed. |
| 82 | Supply and fixingin replacement semi-intergated solar street light fitting 24 watt/ 24AH maintenance free Battery, including galavanized steel pole of suitable height within built, solar panel bracket, solar panel, luminary Armand accessories, charge controller with dusk down sensor complete incl excavation of earth work complete all as specified and as directed.MAKE :- Pitronics/ CG/HaloniX or equivalent . |
| 83 | Supply and fixingin replacement all in one solar street light fitting 40 wattmaintenance free Battery, including galavanized steel pole of suitable height within built, Solar panel bracket, solar panel, luminary Armand accessories, charge controller with dusk down sensor complete incl excavation of earth work complete all as specified and as directed.MAKE :- Halonix cat part No-HLSSLINT0201090419-40W-WOP-CWL or CG/Pitronics |
| 84 | Maintenance and servicing of solar water heater tube/plate type with water tank of cap 100 LPDincl descaling and cleaning, checking any type of leakage in pipes, tank, panels etc also check for loose wire connection and repair the same complete all as specified and as directed.NOTE :- Cost of material incl quoted rate. |
| 85 | Description all as item No.84above but 200 LPD |
| 86 | Description all as item No.84above but 300 LPD |
| 87 | Supply and fixing in replacement ofPVC Copper conductor three core 4 sqmm multi stranded wire complete all as specified and as directed.MAKE :- Havells/Plaza/Nicco or equivalent . |
| 88 | Supply and fix in replacement of air valveand pressure valve of solar water heater complete all as specified and as directed. |
| 89 | Supply and fix inreplacementof silcon coated plate of FPC (Flat plate collector) solar water heater complete all as specified and as directed. MAKE :- TataPhoton/Racold or equivalent . |
| 90 | Supply and fix inreplacementof 100 ltr corrosion resistance insulated tank of solar water heater complete all as specified and as directed. MAKE :- TataPhoton/Racold or equivalent . |
| 91 | Supply and fix inreplacementof 200 ltrcorrosion resistance insulated tank of solar water heater complete all as specified and as directed . MAKE :-TataPhoton/Racold or equivalent . |
| 92 | Supply and fix inreplacement of 300 ltr corrosion resistance stainless steel tank of solar water heater complete all as specified and as directed.MAKE :- TataPhoton/Racold or equivalent . |
| 93 | Supply and fix inreplacementofheating element 2 KW to 3 KW for electricity back up complete all as specified and as directed. |
| 94 | Supply and fix inreplacement ofthermostat , 230 V/50Hz AC for solar water heater complete all as specified and as directed. |
| 95 | Supply and fix in replacementof rubber pipe with clamp dia15 to 20 mm and length 0.5 mtr complete all as specified and as directed. |
| 96 | Supply and fix inreplacement r of HDPE pipe of dia 20mm along with all fitting forwater supply connections complete all as specified and as directed. |
| 97 | Supply and fix inreplacementof sheet metal enlosure with two pin and earth plug and soket complete with one double pole MCB complete all as specified and as directed. |
| 98 | Material and labour for surface mounting Analog time switches, daily dial,incl dismantling taking down unsv one, complete all as specified and as directed. |
| 99 | Material and labour for 3 pole power contactor, 415Volts, 40 amps, , incl dismentling taking down unsv one, complete all as specified and as directed. |
| 100 | Material and labour gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe (ISI marked) and fixed complete all as specified and as directed for the20mm dia |
| 101 | Description all as item No.100above but 25 mm dia |
| 102 | Description all as item No.100above but 40mm dia |
| 103 | Supply and fixin replacement of rotational moulded polyethylene water storage tank of capacity 500 ltr (cylindrical vertical with close top) hoisted and fixed inposition all as specified in SSR Part-I with necessary platform along with fitting for cold water supply of solar water connections complete all as specified and as directed. |
| 104 | Supply and fix in replacement of on load change over switch 63A, 4 pole with steel sheet enclosure complete all as specified and as directed. |
| 105 | Description all as per item No.104 above but 100A |
| 106 | Description all as per item No.104 above but 125A |
| 107 | Description all asper item No.104 above but 160A |
| 108 | Description all asper item No.104 above but 200A |
| 109 | Supply and fix PVC flexible green pipe for dewatering of size 50 mm dia with clamp including all acessories andall as per specified and as directed . |
| 110 | Supply and fix in replacement3 pole power contactor AC, 415 Volt, with required NO + NC & coil voltage 380V to 415V, suitable for upto 30HP water pump complete all as specified and as directed . |
| 111 | Supply and fix in replacement of thermal over load relay for 3 Phase AC motor starter, suitable for 30HP water pump, relay setting range 20.0 to 40.0 Amps complete all as specified and as directed . |
| 112 | Taking out existing damaged brush from suction sweeping equipmentand supply and fixing of new nylon brush (soft quality) with as standard base as per manufacturer\"s size 1.5 feet long & 2.5 Inch wide suitable for fix with suction sweeper complete all as specified and as directed .MAKE :- Mody or as per existing make |
| 113 | Supply, fabricate and fix algae/dry leaves removing net having frame size 30cm x 30cm, made of stainless steel pipe 19mm dia, duly fixed with nylon net as perthe existing and suitable for fixing with existing teliscopic handle complete all as specified and as directed. |
| 114 | Supply and fix in replacement of heavy duty automatic star delta starter type DX-P with robust 4 pole contactor & LR1D OLR, electronic Star Delta Timer in S.S. enclosure (Motor rating AC-3 Duty , 415 Volt, 50Hz, 3Ph) of size 30 HP 415 volts ,relay range 23-32 Amps complete all as specified and as directed. MAKE :- C&S, cat part No BE3-DXP204-314 ortechno commercial equivalent to L&T/BCH |
| 115 | Supply and fixing in repairs cast iron foot valve confirming to IS : 4038 flanged endwith rubber gasket, nuts, bolts & washers of sizes 300 mm bore complete all as specified and as directed .NOTE :- Nuts, bolts & washerswherever required new shall be measured in appropriate item as supply only |
| 116 | Supply and fix in repairs cast iron body non raising spindle sluice valve with cast iron wheel, of size 80 mm bore, class PN-1.6 with SS spindle with brass nut, both ends flanged confirming to IS-14846 with standard bolts hole, fixing with nuts, bolts, washers, rubber gasket etc completein position of pipe line all as specified and as directed. NOTE :- (i) Nuts, bolts & washers whenever require new shall be measured and paid separately as supply only. (ii) Rubber gusket shall be inclusive of the quoted rate of this item. |
| 117 | Description all as per item No.116above butsize 250 mm bore complete . |
| 118 | Supply\"O\" Todoline solution for water testing purpose in 500 ml bottle make Nice/Glaxo or as per existing make complete all as specified and as directed . |
| 119 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cables,pole foundation,stays etc and getting out in soft loose soil, complete all as specified and as directed . |
| 120 | Description all as per item No 119 above but insoft disintegrated rock. |
| 121 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed . |
| 122 | Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed . |
| 123 | Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cable of size 40 mm outer diawith all fittings such as clamps. coupler etc laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/road and making good to match with existing adjoining surface etc for cable protection all as specified(excavation and earth work shall be measured and paid separately) |
| 124 | Description all as per item No123above but of size 50mm outer dia |
| 125 | Description all as per item No- 123 above but of size 63mmouter dia |
| 126 | Description all as per item No- 123 above but of size 90mmouter dia |
| 127 | Description allas per item No- 123above but of size 120mmouter dia |
| 128 | Description allas per item No- 123 above but of size 200mmouter dia |
| 129 | Description allas per item No- 123 above but of size 250mmouter dia |
| 130 | Material and labourfor cable route indicator duly embossed \" MES LT CABLE\" 1100 volts 80mm dia CI plate marked on LT cable bolted with 40x5mm flat iron of height 0.4mtr embedded in PCC 1:3:6 type C2 of size 20x20x30 cm block complete all as specified and as directed. |
| 131 | Dismentling taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismentling ends from over head conductors / MCCBs /joint boxes for relaying /refixing or carrying to store for Sch of credit complete all as specified and as directed. |
| 132 | Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured, heavy duty electric cable with aluminiumstranded conductor, 1100 volts grade, heavy duty cableserved with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq.mm 2 core complete all as specified and as directed. |
| 133 | Description allas per item No- 132 above but 16 sqmm 4 core complete . |
| 134 | Description allas per item No- 132 above but 25 sqmm 3.5 core complete . |
| 135 | Description allas per item No- 132 above but 35 sqmm 3.5 core complete . |
| 136 | Description allas per item No- 132 above but 50 sqmm 3.5 core complete . |
| 137 | Description allas per item No- 132 above but 95 sqmm 3.5 core complete . |
| 138 | Description allas per item No- 132 above but 120 sqmm 3.5 core complete . |
| 139 | Description allas per item No- 132 above but 185 sqmm 3.5 core complete . |
| 140 | Description allas per item No- 132 above but 240 sqmm 3.5 core complete . |
| 141 | Description allas per item No- 132 above but 300 sqmm 3.5 core complete . |
