|
| 1 | Schedule \"A\" |
| 2 | Taking down carefully burnt out aluminium/copper point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendent, regulators, sockets, fluorescent tube light fittings etc., to be measured and paid for separately) removing materials to store for schedule of credit and making good to the disturbed surfaces of walls ceilings and floors etc., complete all as specified and directed by Engineer-in-Charge. |
| 3 | Disconnecting of unserviceable sub main wiring of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces including painting, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multi-stranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non-metallic rigid PVC heavy duty concealed conduit (minimum 20mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc., fixed concealed/ recessed in wall or ceiling etc., including 1.5 Sqmm PVC insulated but unsheathed multi-stranded copper conductor FRLS cable as earth continuity wire Excluding modular type metal flush box with cover plate and frame of required modules for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for the following:-NOTE:-(i) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule \"A\". (ii) GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed. |
| 5 | Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multi-stranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non-metallic rigid PVC heavy duty concealed conduit (minimum 20mm dia external) |
| 6 | One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sqmm (nominal area) cable & 1.5 Sqmm (nominal area) cable as earth continuity conductor, all as specified. |
| 7 | One Socket outlet three pin, 6 Amp, independent, with 1.5 Sqmm (nominal area) cable & 1.5 Sqmm (nominal area) cable as earth continuity conductor, in and including rigid non-metallic PVC medium duty concealed conduit all as specified. |
| 8 | One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sqmm (nominal area) cable & 2.5 Sqmm (nominal area) cable as earth continuity conductor, in and including rigid non-metallic PVC medium duty concealed conduit all as specified. |
| 9 | One Bell/Buzzer point controlled by one push button with 1.5 Sqmm (nominal area) cable & 1.5 Sqmm (nominal area) cable as earth continuity conductor, in and including rigid non-metallic PVC heavy duty concealed conduit all as specified. |
| 10 | One light point controlled by two, 2 way switches with 1.5 Sqmm (nominal area) cable & 1.5 Sqmm (nominal area) cable as earth continuity conductor, in and including rigid non-metallic PVC medium duty concealed conduit all as specified. |
| 11 | Supply & Fixing Switch modular type single pole, one way, 6 Amp, one module, complete all as specified and directed by Engineer-in-Charge.Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 12 | Supply & Fixing Switch modular type single pole one way, 16 Amp,one module, complete all as specified and directed by Engineer-in-Charge.Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 13 | Supply & Fixing Switch modular type single pole, two way, 6 Amp, one module, complete all as specified and directed by Engineer-in-Charge.Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 14 | Supply & Fixing Bell push switch modular type single pole one way, 6 Amp, one module, complete all as specified and directed by Engineer-in-Charge. Make:- Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 15 | Supply & Fixing Socket outlet modular type, multipurpose, 2/3 pin, single pole one way, 6 Amp,two module, complete all as specified and directed by Engineer-in-Charge.Make:-Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 16 | Supply & Fixing Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, complete all as specified and directed by Engineer-in-Charge.Make:-Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 17 | Supply & Fixing Fan regulator, modular type, 5 step, high speed, two module, complete all as specified and directed by Engineer-in-Charge.Make:-Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 18 | Supply & Fixing Modular telephone socket having two gangs, complete all as specified and directed by Engineer-in-Charge.Make:- Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 19 | Supply & Fixing White cover plate with frame, 2 module, complete all as specified and directed by Engineer-in-Charge.Make:- Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 20 | Supply & Fixing Metal flush box 2 module, complete all as specified and directed by Engineer-in-Charge.Make:-Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 21 | Supply & Fixing Modular Electric bell, AC 230 volt, single pole, multi music type, complete all as specified and directed by Engineer-in-Charge.Make:- Anchor Roma (Urban)/ Legrand (Myrius)/ L&T (EnGem) |
| 22 | Material & Labour for Modular ceiling rose, 3-Phase / PVC / polycarbonate, isolated body, complete all as specified and directed by Engineer-in-Charge.Make:- Anchor Roma (Urban)/ Legrand (Myrius) / L&T (EnGem) |
| 23 | Supply & Fixing 1 or 2 Module PVC Modular surface box of size 85mm x 85mm, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply & Fixing 3 Module PVC Modular surface box of size 85mm x 115mm, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply & Fixing 4 Module PVC Modular surface box of size 85mm x 145mm, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & Fixing 6/8 Module PVC Modular surface box of size 132mm x 135mm, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & Fixing 1 or 2 Module Modular cover plate with frame of size 85mm x 85mm, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & Fixing 3 Module Modular cover plate with frame of size 85mm x 115mm, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & Fixing 4 Module Modular cover plate with frame of size 85mm x 145mm, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & Fixing 6/8 Module Modular cover plate with frame of size 132mm x 135mm, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and fixing in replacement following items for maintenance of Internal Electrification, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Switch piano, flush type single pole, one way 5 Amp |
| 33 | Socket Outlet2 in 1, 3 pin, 6 Amp |
| 34 | Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 35 | Switch piano, flush type single pole, one way 15 Amp |
| 36 | Switch socket combination, 6 Amps flush type. |
| 37 | Switch socket combination, 16 Amps flush type. |
| 38 | Lamp holder plug for Batten fitting. |
| 39 | Bell push, flush type 5 Amp. |
| 40 | Electric bell Ding Dong type, 230 Volts Single pole. |
| 41 | Ceiling rose surface type Bakelite / PVCthree terminal 65 x 50mm. |
| 42 | 2.5 mfd Capacitor |
| 43 | Stepped type electronic fan regulator |
| 44 | Top plug 5 Amp complete all as specified and directed. |
| 45 | Top plug 15 Amp complete all as specified and directed. |
| 46 | Casing capping of 25mm x 12mm size complete all as specified and as directed. |
| 47 | Casing capping of 32mm x 16mm size complete all as specified and as directed. |
| 48 | Conduit 25mm size complete all as specified and directed by Engr-in-Charge |
| 49 | Conduit 20mm size complete all as specified and directed by Engr-in-Charge. |
| 50 | Supply & Fixing in replacement of MCB DB sheet enclosure double door type, single pole and neutral 240V with standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete without MCB and with enclosure blank plates for unused way suitable for 12 way type, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Ditto- as per item no. 25 but for 8 way, complete all as specified and directed by Engineer-in-Charge. |
| 52 | Ditto- as per item no. 25 but for 4 way, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fixing in replacement MCB of following rating, complete all as specified and directed by Engineer-in-Charge. |
| 54 | 6-32 Amp SP, 240 volt \"C\" series, 10 KA |
| 55 | 32 Amp SPN, 240 volt \"C\" series, 10 KA |
| 56 | 32 Amp TPN, 440 volt \"C\" series, 10 KA |
| 57 | 40-63 Amp TPN, 440 volt \"C\" series, 10 KA |
| 58 | Material & Labour for sub-main wiring using ISI marked 1.1 kV grade single core FRLS flexible cable, conforming to IS: 694- 1990, having multi-drawn thin strands of electrolytic copper conductors and insulation conforming to IS: 5831- 1984, type C, HR 85° C + FR for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25mm size in existing conduits / PVC Casing capping surface/recessed conforming to IS: 9537 Part- 3, colour-coded as specified in IS: 732- 1989, including making good of disturbed surfaces of wall/ceiling/floor with painting, complete all as specified and directed by Engineer-in-Charge. NOTE: 01 run of phase conductor, 01 run of neutral conductor, 01 run of earth continuity conductor and 01 run of PVC Casing capping shall be measured as one length. |
| 59 | 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire |
| 60 | 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire |
| 61 | 2 x 2.5 Sqmm + 1 x 2.5 Sqmm earth wire |
| 62 | 2 x 1.5 Sqmm + 1 x 1.5 Sqmm earth wire |
| 63 | Supply & Fixing in repair of wall mounted LED Tube light fitting 1 x 10W LED (6500K), 2 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting, complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & Fixing in repair of wall mounted LED Tube light fitting 1 x 20W LED (6500K), 4 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting, complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply & Fixing in repair wall mounted rechargeable invertor LED batten 20(±10%) watt, 6500K, 4ft, not less than 4 hours backup, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver & lithium battery complete including making connection, complete all as specified and directed by Engineer-in-Charge. Make-Havells Cat Part no- LHEXACP7FN1W020 or Equivalent in Phillips/Bajaj |
| 66 | Supply and fixing in repair LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply & Fixing in repair recessed mounted LED COB down lighter of capacity 10 Watt (Warm white) with housing focusing made of extruded aluminium complete all accessories, complete all as specified and directed by Engineer-in-Charge. Make :Wipro, Cat No:LD56-141-060-57-XX*or its equivalent in Philips |
| 68 | Supply & Fixing in repair wall/surface mounted LED Bulk head of capacity 10 Watt IP 65 Protection complete all accessories, complete all as specified and directed by Engineer-in-Charge.Make :Wipro, Cat No:LW07-141-XXX-57-G1or its equivalent in Philips |
| 69 | Supply & Fixing in repair round shape slim recessed mounted LED down light of capacity 12 Watt (Warm white) with die cast housing finished in white powder coating complete all accessories, complete all as specified and directed by Engineer-in-Charge. Make :Wipro, Cat No:LD06-151-XXX-57-XX*or its equivalent in Philips |
| 70 | Supply & Fixing in repair round shape slim surface mounted LED down light of capacity 12 Watt (Cool white) with die cast housing finished in white powder coating complete all accessories as specified and directed. Make :Wipro, Cat No: LD06-301-XXX-57-XX**or its equivalent in Philips |
| 71 | Supply & Fixing in repair round shape slim recessed mounted LED down light of capacity 18 Watt (Cool white) with die cast housing finished in white powder coating complete all accessories, complete all as specified and directed by Engineer-in-Charge. Make :Wipro, Cat No: LD06-221-XXX-57-XX**or its equivalent in Philips |
| 72 | Supply & Fixing in repair round shape slim recessed mounted LED down light of capacity 24 Watt (Cool white) with die cast housing finished in white powder coating complete all accessories, complete all as specified and directed by Engineer-in-Charge. Make :Wipro, Cat No: LD06-301-XXX-57-XX**or its equivalent in Philips |
| 73 | Supply & Fixing in Replacement of u/sLED building security light of capacity 35 watt, LM6 high pressure die cast aluminium housing, IP 66 protection, THD<20%, PF>0.95, Operating Voltage 140-270V AC, 50HZ, complete all as specified and directed by Engineer-in-Charge. Make: Wiproor equivalent in Philips/Crompton Greaves |
| 74 | Supply & Fixing in replacement LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed by Engineer-in-Charge. Make :Wipro or equivalent in Philips/Crompton Greaves |
| 75 | Supply & Fixing in replacement LED Bollard Light Cool White of wattage 11 Watt 6500 K with integrated mounting base plate and driver complete with housing dark grey RAL 7043 IP 65 protection, Resistant to corrosion and Better optics for uniform distribution including PCC (1:2:4) foundation of suitable size for mounting of light fitting, complete all as specified and directed by Engineer-in-Charge. Make:Wipro Cat No:LB13-131-XXX-65-08 or equivalent in Philips |
| 76 | Supply and fixing in replacement post top lantern LED type 40 watt 230 volts AC outdoor type (Warm/Cool White) with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed by Engineer-in-Charge. Make :Wipro or equivalent in Philips/Crompton Greave |
| 77 | Supply & Fixing in replacement of 6 W LED spot light with multiple beam tilting angles, no UV radiation and dimmable ballast, complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply & Fixing in replacement of 100 W flame proof flood light with specification IIC, T5, Zone 1, 2, 21 & 22 with superior thermal management lumen output 120lm/w, complete all as specified and directed by Engineer-in-Charge. |
| 79 | Supply & Fixing in replacement of 10 Watt Outdoor Waterproof LED Flood Light Wide Angle Beam Cool Day Light6500 K Dimension of light (14.5L x 4W x 12.5H) Centimetres, complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply & Fixing in repair round shape surface mounted LED down light of capacity 6 Watt with die cast housing finished in white powder coating complete all accessories, complete all as specified and directed by Engineer-in-Charge. Make :Wipro, Cat No:LD06-670-XXX-57SMG1or its equivalent in Philips |
| 81 | Supply & Fixing in replacement LED driver for 12/24 watt LED light fittings confirming to rating input 180-270 V AC, complete all as specified and directed by Engineer-in-Charge. Make : as per existing |
| 82 | Taking down the old and rusted GI bracket and supply fixing GI bracket of 40mm dia duly painted with two coat of supper enamelled paint over a coat of red oxide including suitable clamps nuts bolts and washers etc., complete all as specified and directed by Engineer-in-Charge. |
| 83 | Deployment of manpower, instrument, tools, and all connected accessories for testing of earth resistance of existing Earthing at provided earth test point for each earth set by competent calibrated digital earth test meter electronic type along with accessories (earth rod set with Cu wire with clips) and recording the result dully signed with date by MES representative and contractor, complete all as specified and directed by Engineer-in-Charge. NOTE:- (a)Testing of each Earthing shall be carried out at the interval of 3 months and measurement shall be done each time separately and test result shall be maintained dully signed with date by MES representative and contractor. (b) Pouring of water in each earth pit is deemed to be included in the rate quoted.(c) Necessary arrangement to be made by the contractor for pouring the water in earth pits.Vehicle reqd for carrying/storage of water (upto to the site) with helper will be arranged by contractor and deemed to be included in the rate quoted.(d) Cost of Maintenance of carrying vehicle (if any) and cost of fuel reqd for veh is deemed to be included in the rate quoted. |
| 84 | Supply and fix in repair Test point terminal block made of gun metal or phosphorus bronze size of 75mm x 75mm x 25mm drilled and screwed with 3 Nos 8mm dia 25mm long screw, fixed in and including SMC junction box of size 170mm x 170mm x 105mm hinged door fixed on wall, complete all as specified and directed by Engineer-in-Charge. |
| 85 | Material & Labour for PCC Earthing pit in PCC 1:2:4 type B-1 of internal size 300mm x 300mm x 300mm with 120mm thick wall and 700mm x 700mm x 150mm thick bed concrete and 50mm thick precast chamber cover of RCC 1:2:4, type B-1 for, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), complete all as shown in the electrical plate No 3 of SSR part –I including demolition of old pit, complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply and fixing in repair mild steel galvanised earth strip of size 25 x 4mm with epoxy insulators and fixing screws etc., for earth continuity conductors to test point terminal including taking down old strip, complete all as specified and directed by Engineer-in-Charge. |
| 87 | Material & Labour for marking of Earthing pit (GI earth / Copper earth / Chemical earth) with two or more coat synthetic enamel paint, colour & pattern as approved by the Engr-in-Charge, Letter size shall not be less than 50mm, complete all as specified and directed by Engineer-in-Charge. |
| 88 | Material & Labour for bore Earthing 150mm bore for Earthing with galvanised steel pipe electrode, 40mm bore, medium grade, 3 metres length, top edge of GI pipe not less than 1.25 metres below ground level, connected with Earthing lead of 25 x 4mm GI strip to the Earthing test point and filling of charcoal dust, salt etc., and testing on completion, complete all as specified and directed by Engineer-in-Charge. Note: IR Value should be less than 5 Ohms.Note: GI earth strip of size 25 x 4 including installation 7.5 Mtr is deemed to be included in the unit rate. |
| 89 | Taking down ceiling fan 1200mm/1400mm sweep and Exhaust fan upto 250mm sweep complete servicing, repair of fan motor and replacement of worn out parts such as bearing and hanging of ceiling fan/Exhaust fan in situ, complete all as specified and directed by Engineer-in-Charge. Note: (i) Rewinding of fan motor will be measured and paid separately. |
| 90 | Dismantling of fan (1200mm sweep) motor, cutting of burnt winding of rotor and rewinding with same gauge copper wire winding with insulated material and reassembling, complete all as specified and directed by Engineer-in-Charge. |
| 91 | Dismantling of BLDC fan (1200mm sweep) motor, taking out unserviceable PCB and replace with new PCB as per existing make and reassembling, complete all as specified and directed by Engineer-in-Charge. |
| 92 | Dismantling of Exhaust fan 250/300mm sweep motor, cutting of burnt winding of rotor and rewinding with same gauge copper winding wire with insulated material and reassembling, complete all as specified and directed by Engineer-in-Charge. |
| 93 | Dismantling of Exhaust fan Plastic Body 250/300mm motor, and replace with new motor and reassembling, complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply & Fixing in repalcement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply & Fixing in repalcement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 200/250mm, complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply & Fixing in repalcement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engineer-in-Charge. |
| 97 | Dismantling electric/water connection and taking down of storage type water heater, servicing, cleaning of inner tank etc. at site and replacement of burnout parts etc. and re-fixing in situ, complete all as specified and directed by Engineer-in-Charge. Note- worn out parts shall be measured as separately. |
| 98 | Supply & Fixing in replacement of spare parts for Geyser |
| 99 | Heating element 1.5 KW with rubber gasket. |
| 100 | Thermostat as per sample/suitable to 25 Ltrs capacity ISI marked. |
| 101 | Hot/Cold water connection pipe 450mm length. |
| 102 | Geyser assembly as per sample suitable for 25 ltr capacity Make: Bajaj Model : Cladia |
| 103 | Comprehensive maintenance, servicing and testing of AC of any make complete for during contract period by cleaning cooling coil, condenser fins, blowing off dust from machines & air filters, checking and de-carbonizing, oiling, greasing of blower motor, checking and removing any vibration, and testing at site, complete all as specified and directed by Engineer-in-Charge. Note:(a) Cost of any minor nature repair / items such as nuts, bolts, washers, screws, rubber mounting pads of compressor, top up of gas, etc and labour required for removing / re-fixing after repair of equipment is deemed to be included in the unit rate of this items. (b) Worn-out compressor, blower motor, replacement if required shall be measured and paid separately. |
| 104 | Split type air conditioners of capacity 1.5 ton |
| 105 | Split type air conditioners of capacity 2.0 ton |
| 106 | Split type air conditioners of capacity 3.0 ton |
| 107 | Material & Labour for detecting the cause of leakage in any type/capacity of 1.5 tonne AC and ensuring the complete system leak proof and charging of refrigerant gas with appropriate quantity as directed by EIC including testing for smooth functioning, complete all as specified and directed by Engineer-in-Charge. Notes :-(i) Dismantling of unserviceable compressor, cost of refrigerant gas and re-installation of serviceable compressor after repairing are deemed to be included in the quoted rates. |
| 108 | Ditto-ser Item No. 67 but of capacity 2/3 tonne, complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply & Fixing in repairs copper tubing of size 3/8\" suitable for split AC with nitrile self-adhesive foam wrapped with PVC insulation all around the pipe line, complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply & Fixing in repairs copper tubing of size 5/8\" suitable for split AC with nitrile self-adhesive foam wrapped with PVC insulation all around the pipe line, complete all as specified and directed by Engineer-in-Charge. |
| 111 | Material and labour for maintenance of air conditioner 1.5/2.0 ton capacity, Split type unit with replacement of old/unsv spare parts mentioned as under or as per manufacturer instructions including testing on load, complete all as specified and directed by Engineer-in-Charge. |
| 112 | Supply & Fixing in repair over load protector suitable range and capacity |
| 113 | Supply & Fixing in repair Running capacitor of 36/45/50/60 + 5/6 mfd suitable for 240 volts 50 HZ AC Supply |
| 114 | Supply & Fixing in repair capacitor of 2.5 mfd suitable for blower fan motor of1.5/2.0 ton AC |
| 115 | Supply & Fixing in repair thermostat switch of suitable for 1.5/2.0 ton AC |
| 116 | Supply & Fixing in repair Contactor relay of suitable for 1.5/2.0 ton AC |
| 117 | Supply & Fixing in repairs Blower motor for indoor unit suitable for inverter type split AC 1.5/2.0 TR of existing make complete |
| 118 | Supply & Fixing in repairs Condenser Fan motor for outdoor unit suitable for inverter type split AC 1.5/2.0 TR of existing make complete |
| 119 | Supply & Fixing in repairs Pre-air filter made up of PVC for indoor unit of split AC suitable for any make and description complete |
| 120 | Supply & Fixing in repairs PVC fan blower assembly for 1.5 /2TR split AC\"s any make |
| 121 | Supply & Fixing in repairs/replacement Printed circuit board(PCB) with suitable fo Split AC1.5/2.0 TR of any capacity, model and make as per existing complete with necessary electrical connection. |
| 122 | Material & Labour for replacement of defective cut open compressor/Uncut compressor suitable for air conditioner with new compressor filled with capila D and charging of refrigerant gas up to required capacity after flushing the complete refrigerant system including repair to leakage if any in refrigerant piping and replacement of filter complete for split type AC\"s, complete all as specified and directed by Engineer-in-Charge. of the following capacity:- |
| 123 | 1.5 ton capacity |
| 124 | 2.0 ton capacity |
| 125 | Supply and fixing in repair flexible PVC pipe for condense water outlet for Split AC as per existing, complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply & Fixing in replacement of outdoor unit stand of metal including fixing accessories such as nut bolt washers and fastener for 1.5/2 Ton outdoor unit, complete all as specified and directed by Engineer-in-Charge. |
| 127 | Supply only spare part for split Ac Cap 1.5/2.0 TR |
| 128 | Outdoor Unit with compressor for 1.5/2.0 TR AC |
| 129 | Indoor Unit with remote 1.5 TR AC |
| 130 | Indoor Unit with remote 2.0 TR AC |
| 131 | Material and labour for servicing/cleaning of water cooler of storage capacity/ nominal cooling capacity(Ltrs/hr) 80/40 & 120/60 litres with the use of anti-scaling agent for internal steel water tank ,outer body and condenser coil of water cooler, Removal of dust and other deposited material for the various functional equipment using smooth nylon brush ,cleaning of drainage for speedy water removal and checking of electrical connection to compressor and other electrically operated equipment’s, cleaning of fins and tubes of condenser, repair/replacement of PUF thermal insulation, checking of refrigerant leakage and functionality of water tap, complete all as specified and directed by Engineer-in-Charge. |
| 132 | Supply and fixing in replacement of hermetically sealed compressor of water cooler of capacity 40 ltr/hr suitable for R134a gas, single phase along with capacitor and relay, including gas charging in the system and testing of water cooler, complete all as specified and directed by Engineer-in-Charge. Make: Copeland/Tecumseh.Note : Cost of cutting of existing worn out compressor will be deemed to be included in unit rate. |
| 133 | Taking out burnt unserviceable condenser fan motor, and replacement with new electric motor, single phase 230V of water cooler 40ltrs/hrs with condenser fan blade, complete all as specified and directed by Engineer-in-Charge. |
| 134 | Supply and fixing in replacement of following items of water cooler |
| 135 | Thermostat for water cooler capacity 40/80 ltr/hrs. |
| 136 | Push type Bib tap Cast copper alloy 15mm Push type chromium plated. |
| 137 | PVC Connection with brass unions at both ends with brass nuts, suitable for fixing to 15mm dia GI Pipe. |
| 138 | Material and labour for carrying out repair /maintenance/ servicing of Refrigerator of any capacity by periodic cleaning of internal and external parts, cleaning of water collection area and checking of electrical circuit repair/ replacement of unserviceable/worn out spares and accessories to make the Refrigerator in good working condition, complete all as specified and directed by Engineer-in-Charge.Note: Defective spares required for replacement shall be measured and paid separately under respective items. |
| 139 | Material and labour for maintenance of Refrigerator any capacity with replacement of old/unsv spare parts as under including testing on load, complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply & Fixing in repair condensor suitable for Refigerator of 195/ 250/ 300 ltr cap |
| 141 | Supply & Fixing in repair cooling effect transmitting fan motor suitable for Refigerator of 195/ 250 / 300 ltr cap |
| 142 | Supply & Fixing in repair Compressor Relay suitable for Refrigerator of 195/250 / 300 ltr cap or as per existingMake KCL/ Rentrol /Indofos |
| 143 | Supply & Fixing in repair thermostat suitable for Refrigerator of 195/250 / 300 ltr cap |
| 144 | Supply & Fixing in repair Compressor suitable for Refrigerator of 250 / 300 ltr cap or as per existing |
| 145 | Material & Labour for charging of refrigerant R-134a gas to Refrigerator for the Refrigerator cap 230/250 Ltrs as per existing /manufacturer instructions after flushing out the entire refrigerant, vacuum testing of entire closed loop system for 24hrs and charging the unit with specified quantity of gas, as per manufacturer instructions, as mentioned above, complete all as specified and directed by Engineer-in-Charge. |
| 146 | Supply & Fixing in replacement of exhaust fan, steel body AC single phase, 230 V of size 300mm sweep with, blades, and frame and louvers, complete all as specified and directed by Engineer-in-Charge. |
