Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-01-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-01-2026 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on bricks or stone wall/ decayed surfaces of concrete from roof projectiokn or RCC Chajjas etc. including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 2 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth (with out using extra cement) incl taking down cement plaster on brick wall etc. and racking out joints hacking for key complete all as specified and as directed. |
| 3 | M&L Rendering 15 mm thickonfair faces of brick/concrete surfaces in cement plaster 1:4, using water proofing compoundmix as per manufacturer detail, finished even and smooth without using extra cement, completeincl taking down cement plaster on brick wall etc. and racking out joints hacking for key , complete all as specified and as directed. |
| 4 | M&L Rendering 10mm thick on concrete surfaces in CM 1:4 finished on even and smoothwithout using extra cement as in ceiling, Chajja or facia etc.incl taking down old plaster complete all as specified and as directed. |
| 5 | Supply onlyIntegral water proofing compound liquid complete all as specified and as directed. |
| 6 | Taking down chowkats or frames n. exc. 1.5 sqm each but with shutter without taking off shutters from the frame complete all as specified and as directed. |
| 7 | Taking down chowkats or frames exc. 1.5 sqm & n.exc. 4 sqm each but with shutter without taking off shutters from the frame complete all as specified and as directed. |
| 8 | M&L for pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60 mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 Nos of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge complete all as specified and directed. |
| 9 | M&L for pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 105mm x 60 mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 Nos of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge complete all as specified and directed. |
| 10 | M&L PCC (1:3:6) type C-2 (20 mm graded aggregate) filling back of chowkats complete all as specified and as directed. |
| 11 | S&F 35 mm thick pre laminated flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 12 | S&F 35mm thick 2nd class hard wood Glazed and skeleton laminated shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securingglass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (A) complete all as specified and as directed. |
| 13 | M&L for solid PVC door/cup board frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and as directed complete all as specified and as directed. |
| 14 | S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (Stile) withflushpanelwith 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed. |
| 15 | M&L for Aluminium anodised powder coated frame for window, ventilator with one or more rebates including joints clite for fixing etc complete all as specified. (Minium thickness of power coating 50 micron) complete all as specified and as directed. |
| 16 | M&L for Aluminium anodised powder coated window/ventilator shutter, sliding type/ hung type, made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No\"s in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed.Note : Sheet glass to be fitted will be measured and paid separately. |
| 17 | M&L for Anodised aluminium power coated (minimum thickness 50 micron) designer grill of 5-6mm dia of mesh size 50X50mm centre to centre with 25mm flat as per sample kept in GEs office including aluminium beading complete all as specified and directed. |
| 18 | M&L for Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and as directed. |
| 19 | M&L for 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each complete all as specified and as directed. |
| 20 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (both type) 300mm longh, and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 21 | S&F Aluminium anodised 150mm long barrel tower bolt of extruded section and fixing complete all as specified and as directed. |
| 22 | S&F Aluminium handles cast type anodised 150mm complete all as specified and as directed. |
| 23 | M&L for Butt hinges 100mm medium weightstainless steel complete all as specified and directed by Engr in charge complete all as specified and as directed. |
| 24 | M&L for Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 125 mm long complete all as specified and as directed. |
| 25 | M&L for Aluminium handle cast type anodized of size 100mm complete all as specified and as directed. |
| 26 | M&L for Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed in floor with over all length of cover plate 150mm complete all as specified and as directed. |
| 27 | Dismantling floor,hearth or wall tilling,cement mortar bedding(but not backing) , terrazzo toping all asspecified and directed. |
| 28 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to emove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed. |
| 29 | M&LNon skidceramiccoloured tiles7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors thick in floor etc set & jointed in neat cement slurry and pointed in white cement and pigmentover 15mm screed bed or beadinglayer in CM 1:4 complete all as specified and as directed. |
| 30 | M&L for Vitrified coloured tiles, light shadeof size 600mm x 600mm x 9 to 10 mm thick, asin floors etc bedded & jointed in neat cement slurry over and including15 mm thick screed bedincement mortar 1:4 and pointed inwhite or coloured cement to match the colour of tiles, completeall as specified and directed. |
| 31 | M&L for Vitrified coloured tiles, light shade 600mm x 600mm x 9 to 10mm thick,on vertical surfacessuch as skirting / dado etc bedded & jointed in neat cement slurry over and including 10mm thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles,complete all asspecified and directed. |
| 32 | M&L for Glazed ceramic coloured tiles of size 450x300x7 mm thick as in vertical surfaces such as skirting, dado, wall etc set and jointed in neat cement slurry and pointed with coloured cement to match over and incl 15 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 33 | M&L 18 to20mm thickblack Granite stone (table rubbed and polished) in cooking plateformbedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stoneover 15mm thick screed bed in CM 1:4 after roughingsurfaces of old concrete floor by picking sweeping down with water to remove dust etcincluding cutting holes into or through reinforced cement concrete slabs , for gas pipe(Superficial area wxc 100 sq cm but n. exc. 250 sq cm complete all as as spd and directed. |
| 34 | M&L for 75 mm thickPCC1:4:8 type D-2 using (40mm graded crushed stone aggregate ) as in sub base of floor completeall as specified and directed. |
| 35 | M&L for Precast designer coloured heavy duty full body paving tiles (factory made)of size 300mmx300mm x 10mm, top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified & directed. |
| 36 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 37 | M&L for 20mm dia PVC coated drapery rods in one length per door/window, fancy type (engraved rods), designed & coloured as approved by GE providing with two nos of Bracket powder coated for holding curtain rod and Fiber fancy dome type or wall to wall fixed in repair complete all as specified and directed. |
| 38 | S&F 300mm ordinary rat tail mild steel rod pattern springs incl roller and rollerplate complete all as specified and as directed. |
| 39 | S&F in repair 20 mm ballvalveshigh pressure of PTMT with epoxy coated , aluminium rod & high density plastic ballscrewed for iron pipe min wt 210 gms complete all as specified and as directed. |
| 40 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store complete all asspecifieda and directed. |
| 41 | Taking up or down 20 mm steel tubing and connections including clearing for refixing or removal to store completeall as specified and direcrted. |
| 42 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified. |
| 43 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified. |
| 44 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 15 mm dia complete all as specified and as directed. |
| 45 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 20 mm dia complete all as specified and as directed. |
| 46 | Demolition of cement concrete in and paving (un reinforced)exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified &directed. |
| 47 | M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :-Base Coat : Berger HS Latex plus (or equivalent)consumption base coat : 0.3 kg/m2Reinforcement : Glass fiberSecond and Third coat : Latex sheild 2K (or equivalent)Consumption top coat : 3 kg/m2System reqquirements : density : 2.00 kg/ltr;Compressive strength: 0.5N/mm2Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent).Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft.All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry.Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix \"CD\" on page no. 108 of tender documents as per Sch \"A\" Note No 19 Page No 17). |
| 48 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement completeall as specified and as directed (WPC to be measured separately) |
| 49 | Supply onlyIntegral water proofing compound liquid complete all as specified and as directed. |
| 50 | S&F 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out rsidual water out from the treated area complete all as specified and as directed. |
| 51 | M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and directed. |
| 52 | M&L Cementconcrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified and as directed. |
| 53 | M&L for 25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and as directed. |
| 54 | M&L for non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors/Skirting etc. set, jointed and pointed with Berger HS tile adhesive anti slip white @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Berger HS Epoxy tile grout(or equivalent) to the floor of toilets and bathroom complete all as specified and directed. |
| 55 | M&L for capilary rise treatment of walls as following :-Base coat: Berger HS Latex plus (or equivalent)Consumption base coat: 0.3 kg/m2Second and Third coat: Latex sheild 2K (or equivalent)Consumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltrCompressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix \"AB\" on page no. 104of tender documents as per Sch \"A\" Note No 19 Page No 17). |
| 56 | S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed. |
| 57 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern)and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe)including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and includingbrass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed. |
| 58 | S&F PVC flushing cistern whiteshade low level 10 ltrs capacity, white with inlet ball valve, float and handle including bracket and flush pipe including connection to pipes, fixed in repairs complete all as specified and as directed. |
| 59 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 60 | M&L for Looking mirror 600 x 450 x 5mm beveled edge mirror of selected quality glass 5mm thick mounted on 6 mm thick AC building board or commercial ply and fixed to wooden plugs with CP brass screws and cup washers etc, fixed in repairs, complete all as specified and as directed. |
| 61 | M&L for Fancy type Brass CP wash hand basinmixer for mixing hot & cold water, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unionsfixed in repairs complete all as specified and as directed. |
| 62 | M&L for Stainless steel grating of 125mm size (square/round), male/female pattern with or without hole, fixed in nahani/floor traps with white/coloured cement, fixed in repairs, complete all as specified & directed. |
| 63 | M&L for Hand shower (Health faucet) brass chromium plated with 1 meter long easy flex tube in chrome finish and wall hook, fixed in repair, complete all as specified and as directed. |
| 64 | M&L for Toilet paper holder of vitreous china, fixed to walls with chromium plated (CP) brass screws fixed in repairs complete, all as specified and directed. |
| 65 | M&L for Tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between Hangs, fixed in repairs complete all as specified and as directed. |
| 66 | M&L for Vitreous china wash basin white flat back size 580x450 mm incl pedestral excluding taps waste chain and plug and porcelain stopper but including brackets, fixed in repair, complete all as specified & directed. |
| 67 | S&F Plate rack made out of 1.00 mm thick stainless steel sheet of size 750mm x 750mm x 250mm , fixed withnecessary bolts and screws in position as specified by Engr-in-charge with complete assembly all as specified and directed. |
| 68 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brickets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 69 | S&F Stop valve/angle valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of four unions and fixed complete all as specified and as directed. |
| 70 | S&F Bib tap 15mmchromium platedcast copper alloy with crutch or butterfly screwed down for iron pipe and fixed complete all as specified and as directed. |
| 71 | S&F in repair Bib taps, chromium platedcast copper alloy, withcapstan head, screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repairs,all as specified and as directed. |
| 72 | S & Fixed in repairs Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and as directed. |
| 73 | S & F in repairs Fancy type chromium plated with long shank and cup (concealed type)15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed. |
| 74 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or union complete all as specified and as directed. |
| 75 | S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs complete all as specified and as directed. |
| 76 | S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm |
| 77 | M&L for 18/19mm thick Prelaminated particleboard, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame workas incupboards , kitchen cabinat etc fixed in repairscomplete all as specified and as directed. |
| 78 | S&F Continuous (piano) hinges,width of flap when open is 30 mm mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 79 | S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 80 | S&F Magnetic catches of 25/30 mm size for cup Board shutter etc complete all as specified and as directed. |
| 81 | S&F hasp and stapple, safety typeofAluminium, anodised, including bolt to hinge type, fixed with screws of 100 mm complete all as specified. |
| 82 | M&L for TMT steel round bars 6 to 8mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, all as specified and directed. |
| 83 | M&L for Form work to soffit of suspended slab such as roof slab not exc 200 mm thick horizontal or slopinf flate including fair finished to concrete surfaces complete all as specified and as directed. |
| 84 | M&L RCC 1:2:4 Type B-1 (using 20 mm graded aggregate) inRoof slab, shelves supported on wall/column and the like etc complete as required. |
| 85 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 86 | Demolition of cement concrete in ground floors and paving (un reinforced) n exc. 15 cm. thickness, below or above ground level, complete all as specified. |
| 87 | Dismantling cast iron or reinforced concrete drain pipes of 75/100mm bore, fixed with walls and taking out of trenches, if required all as specified and directed. |
| 88 | M&L 100 mm thick PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate surface even and fair without using extra cement. |
| 89 | M&L 75 mm thick PCC (1:2:4) Type B-1 using 20 mm graded stone aggregate laid in alternative bays finished the surface even and fair without using extra cement. |
| 90 | M&L for PCC 1:3:6 nominal mix, type C-2 using 40mm graded crushed stone aggregate as in foundations, filling & mass concrete, complete all as specified & directed. |
| 91 | M&L for PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in benching, water troughs and the like including necessary form work, complete all as specified & directed. |
| 92 | M&L for Precast cement concrete 1:2:4 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain faces, set in cement mortar 1:4 complete all as specified & directed. |
| 93 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and as directed. |
| 94 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore complete all as specified and as directed. |
| 95 | S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and as directed. |
| 96 | PVC(SWR) junction single (single \"T\") equal or unequal 110mm bore with access to door ccomplete all as specified and directed. |
| 97 | S&F PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and as directed. |
| 98 | M&L for PVC(SWR) junction single (single \"T\") equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 99 | M & L for PVC (SWR)multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and as directed. |
| 100 | M&L for Preparation of new wooden surfaces of any description,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 101 | M&L for 2 coats of syntheticenamelled paint over coat of red oxide primer on new steel surface over 10cm width or girth including preparation or new surfaces complete all as specified and as directed. |
| 102 | M&L for Preparation of oldsteel surfaces of any description,over 10cm width or girth and applyingonecoats of synthetic enamel paint, complete, all as specified and as directed. |
| 103 | Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/ chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling by filling cracks by Berger Bison Putty/ crack fill paste of Berger Paints or equivalent make and make good smoothen surfae by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted)/10 sqm mtrs diluted with water in 1:1 ratio as per manufacture\"s instruction and all coats incl primer to be applied with fuly automatic airless spray machine of paint appliaction with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed.Allow 6-8 hrs to dry the surrface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directedMake : Berger Paints Weathercoat Long Life Flexo/ Nerolac Paints excel Total/ Asian Paint Apex Ultima/ JK Maximo Ultra Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix \"EF\" on page no. 112 of tender documents as per Sch \"A\" Note No 19 Page No 17). |
| 104 | Meterial and labour for preparation of newly plasstered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay echnology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specification, Anti Algal properties in Two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instruction applied over one coat 1\"1 ratio as per manufacture\"s instruction and all coats incl primer to be applied with fully automatic airlesspray machine of paint application with a flow speed of inium 1 ltr per minute having a pressure of 300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make : Berger Paints Weathercoat Long Life Flexo/ Nerolac Paints excel Total/ Asian Paint Apex Ultima/ JK Maximo Ultra. Notes for smart periodicals (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) the contractor shall upload MoU between tenderer and manufacturer of paints and their authorized applicator before quoting the bids and submit the same alongwith tender & other Documents as mentioned in NIT (c) Cost of scaffolding at any height shal be included in thequoted rate. (d) Preparation of plastered or unplastered surface of removal of existing treatment by scrappigng of walls, chajjas, ceiling, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartaion of surface written approval shall be obtained from GE before applying primer and further tratment/ coat. Bldg wise stage passing register shall be maintained. (e) Finishes ie cement based paint, acrylic water based exterior grade primer, premium acrylic smooth exterior emulsion etc to walls, ceiing, chajjas, fins, fascias, parapets etc shall be applied using airles spray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of are putted majufacturer with pro-guard technology and capability of traking pressure as well as paint and primer usage. (f) This equipment shall be certified by approved manufacturer. (g) The accessories for applying the finishes shall be spray in hard to reach areas ad penetration of finishes on the surface so as to achieve uniform appication and quality surface finish. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix \"EF\" on page no. 112of tender documents as per Sch \"A\" Note No 19 Page No 17). Non uploading of MOU by the bidder shall lead to rejection of bid during technical evaluation. |
| 105 | M&L for Complete removal of existing treatmentfrom internal wall surfaes and applyingtwo coat of oil bound distemper over 1mm thick of wall care putty complete all as specified and directed. |
| 106 | M&L for preparation of newly plastered surface of walls including corners and applying two coats ofdistemper oil emulsion over applying of 1 mm thick wall care putty finish wall surface even & smooth all as specified and directed. |
| 107 | Demolition of brick work or stone masonary built in cement mortarincluding all quoins , arches,pillar etc but excluding ashlars facing dressed stone work and pre-cast concrete article complete all as specified and directed. |
| 108 | M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete, all as specified and as directed. |
| 109 | M&L for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4 but except brick i.e. using serviceable bricks obtained from Srl item No. 107 here-in-before, complete all as specified & directed. |
| 110 | Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and as directed. |
| 111 | Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 112 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. orfor shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan in any type of soil and getting out,complete all as specified & directed. |
| 113 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed. |
| 114 | Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed. |
| 115 | M&L for Concrete bed to 100mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:4:8type D-2 using 40mm graded stone aggregate, and tested,for 100mm dia bore pipes allas per SSR Part-I specifications, complete all as specified and directed. |
| 116 | S&F 100mm diameter DWCPE (SN8) HDPE Pipes laid in trenches on PCC bed including jointing as per manufacturer\"s instructionscomplete all as specified and as directed.. (Bedding/Haunching and earthwork paid separately under respective items of schedule) |
| 117 | M&L for Cutting salt-glazed stoneware drain pipe in position new drains (internal dia of pipe 100mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and as directed. |
| 118 | S&F 0.50 mm thck pre parinted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour tensile strength of 550 Mpa as in roof covering , cladding to wall, ridge , gutter etc fixed with self tapping screws complete all as specified and as directed. |
| 119 | M&L for Pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 120 | S&F Steel work as in tubular trussesincluding special shaped washer etc. omplete using ERW or induction butt weldedtubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 121 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails andfastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed. |
| 122 | M&L for Framed brackets of angles or tees with web and flanges cut toshape, drilled and countersunk or screw, including bending andwelding angles, as necessary,gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under \"Structural Steel\") complete all as specified and as directed. |
| 123 | M&L for Providing cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate ) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 124 | M&L for Home Sheild PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied water-proofing membrane that is highly elastic and UV resistant with 10 years warranty. ASTM D 6083-97 a waterproofing and heat reflecting system having following key performace properties : 1. UV resistant, prevent yellowing and weathering2. Highly elastic upto 350% and crack bridging3. Excellent adhesion on porous and non-porous substrates4. Tensile strength > 10 N/mm2 with Geo Textile fleece5. Soler reflective Index(SRI) more then 109-111 ASTM E 1980-11 System :First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer (or equivalent)Coverage :0.2kg/m2 (with 50 % dilution of water)Reinforcement : Geotextile 40 gsmSecond coat : Home sheildroofkoat (or equivalent)Consumption : 0.5 kg/m2Third coat : HS PU roofkoat (or equivalent)Consumption : 0.8 kg/m2 System buildup-1.5kg/sqm with geotextile of 40 gsmFor accessible roof, tiles with scred/ adhesive may be fixed thereafter.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix \"GH\" on page no. 116 of tender documents as per Sch \"A\" Note No 19 Page No 17). |
| 125 | E/M Portion |
| 126 | Takingout carefully copper/aluminium point wiring,Light,fan,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete |
| 127 | Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge. |
| 128 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed. |
| 129 | Taking down Electric meter any type including disconnection electrically and refixing the same at same or new location complete all as specified and as directed. |
| 130 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and includingrigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and includingpressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed typefor mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. |
| 131 | All as per item no-130 above but for one fan point controled by one piano switch all as specified and as directed. |
| 132 | All as per item no-130 above but for one bell point controled by one bell push all as specified and as directed. |
| 133 | All as per ser item No 130 hereinbefore but for one 3 pin socket outlet 5 Amp Same board. |
| 134 | All as per ser item No130 hereinbefore but for one 3 pin socket outlet 5 Amp independent. |
| 135 | All as per Item no 130 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed. |
| 136 | All as per item No130 above but One light point controlled by two way switch |
| 137 | Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed. |
| 138 | Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed. |
| 139 | Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed. |
| 140 | Supply and fixmodular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. |
| 141 | Supply and fixmodular type socket 5 pin, 6 A/16 Amps2 module complete all as specified and directed. |
| 142 | Supply and fixof Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 143 | Supply and fixLamp holder PVC case body of Bakelite with back plate suitable for batten fittings , all as specified. |
| 144 | Supply and fix LED lamp,6500K,900lm in white colour of 12 Watt base cap B-22 with poly carbonate difusser and aluminium heat sink ,complete all as specified & directed. |
| 145 | M&L for Electronic fan regulator stepped type,two modulewith five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete all as specified and as directed. |
| 146 | Supply and fixof Bell push flush type piano 5 Amp complete, complete all as specified and as directed. |
| 147 | Supply and fixBell multi music 230 volt ,AC single pole complete all as specified and as directed.. |
| 148 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 149 | Supply and fix of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 150 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed. |
| 151 | M&L for Exhaust Fan plastic body, 250 mm(12\") sweep, single phase, 230 volts 50 Hz AC,1200 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed. |
| 152 | M&L forExhaust Fan plastic body, 300mm(12\") sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed. |
| 153 | Supply and fix of Factory made flush shutter type sheet metal enclosures, double door,forMCCB DB load link, Vertical, triplepole and neutral, 4 way IP-43,Suitable for MCCB up to 160A as incommer.complete all as specified and as directed. |
| 154 | Supply and fixof Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 16 KA 0f size 160 amp complete all as specified and as directed. |
| 155 | Supply and fixof Sheet metal enclosure IP-43 double door for DBs(where MCBs arereqd) SPN 240 V, for 12 ways, complete all as specified and as directed. |
| 156 | Supply and fixof MCB SP-06 to 32 Amp, 240 volts complete all as specified. |
| 157 | Supply and fix of MCB SPN-6-32 Amp, 240 volts 50Hz AC supply, complete all specified. |
| 158 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. |
| 159 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 10 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. |
| 160 | S&F single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing point wiring complete all as specified and as directed. |
| 161 | Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion. |
| 162 | Supply and fix IP 66 Integral LED security light luminaire 35W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens & heat resistanttoughned glass ,efficacy 110 lumens/watt, external 10KV,440 volt SPD and inbuilt 4KV , IP 67 potted isolated driver with operating range 902V to 340V AC .CCT 5700K,LED life -1 lakh burning hours,fixture should withstand 320 volt upto 48 hrs , Auto cut off >320 volts & restart,440 Volt sustainupto 8 hrs,NABL Acreddited LM79 report including GI pipe 40mm ,medium grade ,1.7mtr long mounting bracket and providing fixing clamps ,bolts,nuts of suitable sizecomplete all as specified and as directed. |
| 163 | Supply install testing and commissioning of 1200mm sweep 230 volts AC ceiling fan , one star BEE rating confirming to IS 374:2019, 3 bladealong with copper wound stator , with minimum air delivery 210 cubic metre per minute ,aluminium blades , capacitor ,downrod, canopy etc as required including making connection with three core 1.5sqmm flexible copper cable upto ceiling rose complete all as directed. |
| 164 | Supply,install and testing water heater storage type(Geyser)single phase 230V,50Hz ,5 star energy saving high density PUF insulation tank made of heavy duty magnesium anode rod with steel core to protect enamelled tank from rust & corrosion ,vertical installation type, 25 Litre capacity,2000Watt rated power,incoloy 800 glass coated heating element,tank coating of feroglas powder,tank made of ultra thick super cold rolled steel plates,rated pressure 0.8MPa,IPX4 protectionconsist of safety valves,thermal cut off, thermostat including connecting up fixed to walls by drilling of holes ,grouting of bolts of suitable size with nuts etc and makinggood disturbed surface complete all as specified & directed. |
| 165 | Supply and fix tamper proof with inbuilt intelligence electronic Energy meter single phase, two wire direct connected meter with parameter (voltage P-n, PF, Frequency current line KW demand, LDC display, optical port class 1.0s), 240 volts 10-60 Amps complete with meter box single phase with locking arrangements molded in UV stabilised transherant/flame retardant high grade engineering plastic with unique arrangements for plifer proof interlocking with hinge type box with connection of suitable size wire including seal and sealing wire and furnishing details of Qtr No, Meter No, Initial reading writing with paint of MES No all as direcrted by Engr-in-Charge make ISI mark.Note : (i)MES No to be marked on the meter with black paint as directed and all details i.e bldg No, qtr No, initial reading, Serial no of new meter and final reading ifreadable withqtr No& ser No as per specified format to be submitted by Contractor.(ii)All old meter removed from bldg to be deposited to MES store yard. |
| 166 | Supply and fix sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb complete all as specified and as directed. |
| 167 | Cutting existing steel tubing15 mm bore for alterations or additions complete all as specified and as directed. |
| 168 | Screwing existing steel tubing 15mmfor alterations or additions complete all as specified and as directed. |
| 169 | S & F Tubes medium grade galvanized 15 mm dia with fittings such as socket, bend and fixed complete to walls and ceilings all as specified. |
| 170 | Taking out/down unserviceable, defectivecable any Type/size including disconnecting all the electrical connections all as required at site and complete all as specified and as directed. |
| 171 | Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed. |
| 172 | Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified and as directed. |
| 173 | S & F Steel pipe glavanized grade of 40 mm core laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete all as specified and as directed.. |
| 174 | Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick complete all as specified and as directed. |
| 175 | M & L for tubing GI \"MG\" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 50 mm dia complete all as specified and directed |
| 176 | M & L for of tubing GI \"MG\" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 25 mm dia complete all as specified and directed |
| 177 | M & L forof tubing GI \"MG\" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 20 mm dia complete all as specified and directed |
| 178 | M & L for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm bore complete all as specified and as directed. |
| 179 | M & L for of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and as directed. |
| 180 | Cutting existing 80/100/150 mm GI pipe and inserting GI Tee of size 100x100x50 mm for tapping including necessary earth work and making flange for connection of new 50 mm of GI pipe including complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail