|
| 1 | Scarifying or picking gravelled macdum or bituminous macadum surfaces in area not exceeing 400 Sqm, exceeding 50 mm and not exceeding 100 mm deep complete all as specified and as directed. |
| 2 | M&L 7.5cm compacted thickness WBMwith coarse aggregate 9granite, trap or basalt) of grading 2 (63 to 40 mm), spread rolledand compacterd to gradient and camber required complete all as specified and directed. |
| 3 | Preparing of unsurfaced WBM surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etcand applyingevenly a tack coatwith bituminous primer using paving bitumen of grade VG-10@ 10 Kg per ten square metrecomplete all as specified and as directed. |
| 4 | Repair to potholes any depth, not exc1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm all as specified. |
| 5 | Preparing of existingold black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etcand applyingevenly a tack coatwith bituminous primer using paving bitumen of grade VG-10@ 5 Kg per ten square metrecomplete all as specified and as directed. |
| 6 | M&L Providing bituminous premixsemi denseasphaltic concrete 30 mmconsolidated thickness with minimum5.0 % binder contentby weight of total mix, using paving bitumen VG-30using hot mix plant and laidby using mechanical paver, rolled and compacted to required camber and gradient complete all as specified and as directed.Note :- (i)Work shall be executed as perapproved design mix from NABLGovt approved lab /Govt Engg College as decided by GE.(ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government. |
| 7 | S&Fin replacement cat eye reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.0 fixed with and including mild steel stud of suitable sizecomplete all as per manufacturer\"s instructioncomplete all as specified and directed |
| 8 | S&F in replacement solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25 mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/0.3 Watt one NI-ed recharageable battery (1.2V/1600MA) consiting of super bright LED with 10,000 to 18,000 mcd complete all as per manufacturer instructions complete all as specified and directed. |
| 9 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirmingto BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.Note:- (i)Road marking work shall be carried out in accordance with manufacture\"s instructions and as specified.(ii)ReferMORTH specification ofPara803.4.2.1 and 800.4.2.2 on bituminous surface in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specificationPara 803.4.3.3 |
| 10 | Demolition of cement concrete ( un-reinforced)in ground floor and paving not exceeding 15 cm thick below or above ground level complete all as specified and as directed. |
| 11 | M&L 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm grade stone aggregateas insub base completeall as specified and as directed. |
| 12 | M&L 75 mm thick cement concrete 1:2:4 type B-2 using 40 mm grade stone aggregateas inflooring, surface finished even even and smoothwithout using extra cement and spike rolling to the surface ormaking impression of expanded metal whilst the concrete is greeen completeall as specified and as directed. |
| 13 | M&L 60 mm thick , M-35 grade machine pressedpre-cast interlocking paver block any shape and sizeconforming to IS 15658-2006with grey cement and pigment complete all as specified and as directed. |
| 14 | M&L 25 mm thick sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed.. |
| 15 | M&L providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line,level, and curvature, jointedwith cement mortar 1:3 including joints with or withour grooves ( thickness of jointsexcept at sharp curve shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and as directed. |
