|
| 1 | Hacking of CC flooring including cleaning for surface etc. complete as per |
| 2 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of Ist class teak wood and priming coat with approved steel primer all complete. |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 4 | Extra for concrete work in superstructure above floor V level for each four floors or part thereof. |
| 5 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 7 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 8 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 9 | One or more coats on old work |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 11 | One or more coats on old work |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 13 | Precoated galvanised iron profile sheets 0.50 mm thick |
| 14 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. |
| 15 | All kinds of soil. |
| 16 | Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in : |
| 17 | Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 18 | 25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with : |
| 19 | Ist class teak wood |
