|
| 1 | Taking down carefully unserviceable LED Street light, flood light fitting 30/60/90/120/250 watts any type from pole/wall/High mast dismantling and checking out serviceability of parts/circuit such as drivers, MCPCB etc repalcement of unserviceable parts with new parts including soldering with existing circuit board, reassembling and refixing in position including connecting, testing complete all as specified and directed.Note : (i) New parts shall be measured and paid separately under relevant items as supply only.(ii) Rate included for taking down old unsv existing street light fittings of any capacity and fixing with new LED street light fitting are measured and paid separately unders revalent items as supply only. |
| 2 | Supply only LED street light fitting 70 Watts, IP 66, having pressure die cast alumnium alloy housing with heat resistant with individualpeanut LED lenses and Driver shall be IP-66 for water protection, including surge protection device 5 KV including making connectionscomplete all as specified and directed. |
| 3 | Supply only LED street light fitting 60 Watts, IP 66, having pressure die cast aluminium alloy housing with heat resistantwith individual LED peanutlenses and Driver shall be IP-66 for water protection, including surge protection device 5 KV including making connections complete all as specified and directed. |
| 4 | Supply only LED street light fitting 90 Watts, IP 66, having pressure die cast aluminium alloy housing with heat resistant toughned glass with individual peanutLED lenses and Driver shall be IP-66for water protection, having surge protection device 10 KV, including making connectionscomplete all as specified and directed. |
| 5 | Supply only LED flood light fitting 120 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 Kv and Driver shall be IP-67 for water protection, including making connections complete all as specified and directed. |
| 6 | Supply only LED flood light fitting 210 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 Kv and Driver shall be IP-67 for water protection, including making connections complete all as specified and directed. |
| 7 | Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for laying for cables etc not exc 10 sqm on plan andgetting out in any type of soil including removal of sand, bricks/PCC covers laid for cable proection complete all as specified and directed. |
| 8 | Excavation in trenches in soft/loose soil not exc 1.5m wide and above 1.5m depth for errection of poles, stay andpipe line, and getting outcomplete all as specified and directed. |
| 9 | Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in any type of soil complete all as specified and directed. |
| 10 | Removing surplus excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 11 | Supply and laying in replacement of brick, double walled corrugated (DWC) HDPE duct pipeconforming to IS 16205 Pt -24 of approved color complete with fittings for cable protectionofsize 63mm outer dia and 50 mm inner dia complete all as specified and directed. |
| 12 | Supply and layingXLPE LT UG cable PVC insulated, beddedarmoured heavy duty electric cable 1100 volts grade with aluminum conductor of 35 Sqmm 3.5 core laid in trenches or fixed on wall/floor/poles including taking out old unserviceable existing LT UG cables complete all as specified and directed. |
| 13 | All as per Srl Item No 12 here-in-before but size of cable 50 Sqmm 3.5 Core |
| 14 | All as per Srl Item No 12 here-in-before but size of cable 70 Sqmm 3.5 Core |
| 15 | All as per Srl Item No 12 here-in-before but size of cable16 Sqmm 4 Core |
| 16 | Supply and fixing in replacement PVC enclosurebus bar chamber of out side dimension 300X200X105 mm, shock proof, vermin proof and dust proof complete with04 Nos with colour coded heat shrinkable sleeves and shall be mounted on F class insulators of capacity 100 amps with 01 No 20Amp SPN MCB including 02 Nos non metalic clamps and GI nut bolts and washers of suitable size and fixed on pole/wallincluding taking down old unsv complete all as specified and directed. |
| 17 | M & L for locating and repairing LT feederfaults ( OH lines or UG cables) such as short circuiting, snapping of conductors, phase/neutral loss in UG cables etc and making the defective circuit serviceable in all respects complete all as directed. Note :- (a). Repairing offault in one circuit , irrespective of any no of street lights/poles/junction boxes etc ,at any location shall be treated as one job only. (b). Earth work, if required, shall be measured and paid separately. (c). All type of T & P ,PVC insulation tapes, minor nuts/bolts/washers etc requiredshall be provided by the contractor without any extra cost to department.(d) Any loosened/broken overhead conductor shall be restringed/repaired to make the system functional in all respects & unit rate quoted shall be deemed to include the cost of the same. |
| 18 | S& F in replacement of 1100 volts grade heavy duty PVC insulated aluminium conductor, bedded unarmoured cable of size 10 Sqmm 2 core fixed on wall/floor/poles complete all as specified and directed . |
| 19 | S&F in replacement of 1100 volts grade heavy duty PVC insulated aluminium conductor, bedded unarmoured cable of size 4 Sqmm 2 core fixed on wall/floor/poles including 15mm PVC flexible pipe complete all as specified and directed . |
| 20 | Supply and fixing in replacment of natureswitch complete with timer( Swadeep), contactor, relays and suitable rating MCBs for incoming and out going in built in suitable IP 66 enclosure of three phase integrated models of capacity 8 KW to 10KW complete all as specified and directed. |
| 21 | Material and labour for replacement of damaged/unsv steel tubular/cement pole with Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 meters long) includingprepration painting of complete area with two coat of aluminum paintfrom 1.5 mtr above ground level to top of pole and a height of 1.5 mtr from the ground level synethetic enamel paint in alternate strips/layer (30 cmwide) with white and bluecolour including writing the pole number in white letters on black background completeall as directed and specified. |
| 22 | Material and labour for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete for foundation of poles complete all as specified anddirected. |
| 23 | Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping/pedestal of poles including necessary form workand finishing surfaces fair and even using extra cement complete all as specified anddirected . |
| 24 | Supply and fixing in replacement of solar charge contoller 10 Amp with protection circuts for 20 to 32 Watt Solar lights, system-12V nominal Capacity 80 Wp Max complete all as specified and directed. |
| 25 | Supply and fixing in replacement of solar charge contoller 15 Amp with protection circuts for 40 to 60 Watt Solar lights, system-12V nominal Capacity 150 Wp Max complete all as specified and directed. |
| 26 | Supply and fixing in replacement of PIR Motion Sensor 170uA for 12 to 60 Watt solar light standard detection 5mcomplete all as specified and directed. |
| 27 | Supply and fixing in replacement ofMotion Sensorfor 12 to 60 Watt solar light standard detection 5mcomplete all as specified and directed. |
| 28 | Supply and fixing in replacement ofLithium Battery 11.1V 19.8Ah suitable forfor 12 to 60 Watt solar light eith BMS Circuit and other necessary wires and connections suitilable for 12 W to 60 Watts, Warranty 3 Years complete all as specified and directed. |
| 29 | Supply and fixing in replacement ofRocker Switch 6 Amp to 10 Amp forsolar light standard detection 5mcomplete all as specified and directed. |
