|
| 1 | BOQ perticulars |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 3 | KSRRB 300-45. Scarifying by manual means stone metal crust 50mm to 100mm thick along with premix carpet I surface dressing and stacking of old serviceable materials including cost of all labour charges complete as per specifications. MORTH I Chapter 3 |
| 4 | Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means |
| 5 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking th |
| 6 | Providing and laying 60mm thick factory-made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of 6mm down size metal chips (average thickness) filling the joints with fine sand etc. all complete as per the direction of Engineer in charge. (WMM/WBM Base to be paid separately, if necessary, as per relevant technical specification). |
| 7 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates |
| 8 | Providing Thermo-Mechanically Treated bars of grade Fe-550 SteelreinforcementforR.C.C.workincludingstraightening, cutting, bending, placing in position, binding and anchoring to adjacent members wherever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) |
| 9 | Providing and laying in Reinforced cement concrete for all Basement &surfacelevelworks,returnwalls,retainingwalls,sunkenfloors etc. Thegranite/trap/basaltcrushed graded coarse aggregatesand fine aggregates as per relevant IS Codes machine mixed with super plasticizers,laidinlayers,wellcompactedusingneedlevibrators, providing weep holes wherever necessary, including all lead & lifts,cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregate |
| 10 | Providing and applying white cement based external putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. |
| 11 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to givean even shade after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surfaceeven and sand paper smooth, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One coat applied @ 0.90 l/10 m²) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
