|
| 1 | Supply, installation, testing and commissioningin replacement of exterior IP68 LED RGB/RGBW Flexible light strip of 5 mtr standard length with 10-15 Watt per meter which can be compatible with the DMX / Ethernet controller. Minimum System lumens of minimum 450 lumens/meter and System Lumen Efficacy > 30lm/w. Luminaire light beam spread - 110°, The Strip should have IP 68 protection and is offered IP 67 rated connector to join the LED Strips incontinuity. The luminaire must be offered with Aluminum channel for mounting the strip lights. The product should be complete with all accessories and Driver.The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. |
| 2 | Supply, installation, testing and commissioningin replacement of Rectangular shaped Single head architectural RGBW (W=4000K) LED flood light with integral driver & housing made of extruded aluminum with die-cast aluminum end caps. Product dimension of luminaire: 486mm x 140mm x 149mm (with bracket). The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall not be more than 6.2KG. The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 10° beam angle(±10%) & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 120W and system lumen output of not less than 6200 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared--- |
| 3 | life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation.The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device.The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours.The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. |
| 4 | Supply, installation, testing and commissioningin replacement of 1000mm long rigid architectural RGBW (W=4000K) LED Linear light with integral driver & housing of Extruded aluminium alloy & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 38mm & height of 90mm without brackets. The luminaire’s integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall be 0.85KG (±10%). The luminaire shall be equipped with high-power led\"s, approved make: Cree, osram, lumiled or equivalent. The fixture shall have 17° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 18W and system lumen output of not less than 700 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have a non-integral driver with input voltage of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation.The luminaire shall be compatible with DMX512 ---- |
| 5 | controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer& RoHS Compliance alone with CE certificate. |
| 6 | Supply, installation, testing and commissioningin replacement of 1000mm long rigid architectural RGBW (W=4000K) LED Linear light with integral driver & housing of Extruded aluminium alloy & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 38mm & height of 90mm without brackets. The luminaire’s integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall be 1.55KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 17° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 36W and system lumen output of not less than 1100 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have a non-integral driver with input voltage of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation.The luminaire shall be compatible with DMX512 controller. The luminaire shall--- |
| 7 | automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer& RoHS Compliance alone with CE certificate. |
| 8 | Note for Item No. 1 to 4:- The bidder shall upload the luminaire BIS certificate of OEM ,any from the list of approved manufacturer/ make given along with technical bid. The same make shall be approved for incorporation in the work. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables & necessary end plates / covers. |
| 9 | Supply, installation, testing and commissioningin replacement ofCompact master Content Program Controller (DMX controller) with capability to control minimum 8 DMX512 universes, playback scenes and animations stored in its SD card, and it can be used for offline scenes scheduling, setting brightness, white balance and playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automatic playback scheduling. It should support power-on startup and scheduled timing start along with capability of unattended operation and remote scene triggering if needed. The Content Program Controller shall have integrated LCD display & support IR remote control. The dimensions of the Content Program Controller shall be approximately 278X193X66 mm (±10%). It should be housed in aluminium casing. The Input voltage shall be 12VDC & shall have 2 RJ45 ports on Input side. The IEC classification shall be Class III. It should operate on DM512 protocol. The output shall have 8 X 3P lockable terminals.The power consumption shall be 8W (±10%). The Content Program Controller shall have one SD card slot for maximum 32GB card & the SD card being used shall be FAT32 format. The Content Program Controller shall come with 220-240V to 12V DC power supply.The IP rating of content program controller shall be IP20 & shall comply to CE, CB & CQC certifications. The DMX controller/content program controller shall be from the same make/brand/manufacturer as that of façade lighting luminaires.The working temperature range shall be -30°C to 50°C. The successful bidder shall submit the technical data sheet for approval before supply of material. |
| 10 | Supply, installation, testing and commissioningin replacement ofRDM-6Wall Splitter,should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs,Automatic switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior applications,Finish/Color-Polycarbonate, Certification: CE Certified. |
| 11 | Note for Item No. 1 to 4, 6 & 7:-a) The contractor shall submit a Manufacturer’s Authorization Form (MAF) from the OEM of the lighting fixtures and related items, covering all warranties, along with the technical bid.b)Make of item No. 6& 7 shall be the same s of luminaire under item No.1 & 4.(c) Make of luminaires : Philips / Osram / Havells / Wipro / Bajaj / Panasonic / Anchor. |
| 12 | Taking out/ dismantlingof old unsv panel with accessories and Supply, installation, testing and commissioning of cubical/outdoor type power supply panel/ feeder made of 3.15 mm thick CRCA sheet with powder coated painting consisting of following items :-Incoming- 63A, Four Pole MCCB, 415V, 36KA. Outgoing - 12 nos. 16 A DP MCB, C-Series, 10KA. Timer- Astro type digital Timer Switch with suitable rated 3 phase contactor.Selector Switch- Auto/Manual, Protection- Over Current, S/C, E/F.Indication Lamps, On Off push buttton, control wiring |
| 13 | Supply and Laying in replacement of 1.1KV Grade 4 Core X 25 sqmm, Type Ar. Aluminium cable incl necessary fixing / fastners etc complete all as specified. Make:Polycab/ KEI/ Finolex |
| 14 | Supply and Laying in replacement of 1.1KV Grade 3 Core X 2.5sqmm FRLS Type fexible Copper cable, incl necessary fixing / fastners etc complete all as specified. Make:Polycab/KEI/Finolex |
| 15 | Supply & layingin replacement of unarmored CAT6 Cable Make:Polycab/KEI/Finolex |
| 16 | Supply & laying in replacement of 25sqmm dia PVC Conduit Pipe/ Fexiablewith as required accessories |
| 17 | SITC in replacement of IP55 suitable sizes Junction boxes with necessary accessories for Drivers, Decoder & necessary required. |
| 18 | M & L for Termination of cat6 and 3 core 2.5 sqmm & Cat6 cable |
| 19 | Supply, installation, testing and commissioning in replacement of fabrication and installation of various sizes of strips and angles of galvanized iron to be used for installation of fixtures on the wall/pillarfor support with necessary accessories. |
| 20 | Supply and erection in replacement of 4U Rack for main DMX Cotroller with 1KVA UPS as required ness. interconnection |
| 21 | Supply and Fixing in replacement of SMPS, 150W 24VDC power supply |
| 22 | Supply and laying in replacement of Aluminium Channel |
| 23 | Supply and fixing in replacement of DMX Decoder |
| 24 | M & L for installation, Programming, Testing & Commissioning charges incl Hire charges of hydralic ladder / scaffholding / bamboo structures etc as per site requirement complete all as specified and directed |
| 25 | M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to and including earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil up to 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made but at 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed includingremoving of old unserviceable earthing. |
| 26 | S & F in replacement of cablofil hot dip galvanized cable trays, top cover, wall supports and jointing / fixing accessories for fixing over walls complete, size 54mm (Height) x 100mm (Width) all as per Cat No. CM000073 of Legrand-Cablofill or techno commercially equivalent in other makes specified. |
| 27 | S & F in replacement of DLP PVC trunking of size 80x50 mm of 2 mtr length, including accessories like bend etc and fixing complete all as specified & directed. |
| 28 | S & Fin replacement of Full Cover Suitable for PVC DLP trunking Size 80x50mm of 2 mtr length all as specified & directed by Eng-in- charge. |
