|
| 1 | Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified.. |
| 2 | Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radiusbuilt in cement mortar 1:6 (1 cement : 6 coarse sand), upto G+5 storey bldg complete all as specified. |
| 3 | All as per serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used).upto G+5 storey bldg complete all as specified. |
| 4 | Taking down cement plaster in any thickness from brick or stoneetc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified. |
| 5 | M & L for 15 mm thick internalrendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content complete all as specified and directed.Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 6 | M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content complete all as specified and directed.Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 7 | M & L for 2-3 mm thick Wall care putty on wallcomplete all as specified as directed. |
| 8 | M & L for 2-3 mm thick Wall care putty on cellingcomplete all as specified as directed. |
| 9 | Material and labour for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified. |
| 10 | Supply only Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder for cement plaster and concrete. |
| 11 | Preparation of newlyplastered surfaces of wallsand applying two coats of distemper over a coat of primer, complete all as specified and as directed. |
| 12 | M&L Preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 13 | Material and Labour for two coats of Nanotechnology based Acrylic Regular Distemper, water based gives walls a smooth and matt finish and applied on prepared surface of wall & ceiling over a coat of approved nano primer @ 6.50 sqm/ltr using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and dircted by Engr-in-Charge. |
| 14 | Preparingold decoratedplastered or un-plastered surfaces of wallsby scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots complete removal of existing treatmentetc and applying one coat ofwashable distemper on wall surfaces including preparation of surfaces byprimer and filling cracks/holes withputty, up to G+5 storey bldg complete all as specified. |
| 15 | Description all as per serial item No. 14 above, but two coats ofwashable distemper, complete all as specified and directed. |
| 16 | M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge. |
| 17 | Preparingold decoratedplastered or un-plastered surfaces of wallsby scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spotsetc and applying two coat of white wash on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, up to G+5 storey bldg complete all as specified. |
| 18 | Description all as per serial item No. 17 above, but on ceiling, complete all as specified and directed. |
| 19 | Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint completeall as directed by the Engr-in-Charge. |
| 20 | Material and labour for applying one coat of synthetic enamel paint on old painted steel and ironsurfaces of any description over 10 cm in width or girth includingnecessary preparation of surfaces. |
| 21 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed |
| 22 | M&L for 595mm to 605mm x 595 mm to 605 mm x7-8 mm rectified coloured ceramic tiles, joint free, as approved by Garrison Engineer in floors over 15mm thick screed bed in CM 1:6,G+5 storey bldg complete all as specified. |
| 23 | M&L for 595 mm to 605 mm x 100 mm x 7-8 mm thick rectified coloured tiles as skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4G+5 storey bldg complete all as specified.. |
| 24 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white oroloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) G+5 storey bldg complete all as specified. |
| 25 | M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and overincluding rendering 10mm thick cement mortar in CM 1:4G+5 storey bldg complete all as specified. |
| 26 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old pipes and necessary cutting through RCC roof and brick work etc and making good all as specified. |
| 27 | S&F of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified. |
| 28 | Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified. |
| 29 | All as per item no 28 here-in-before but dia of GI pipe is 15mm. |
| 30 | S&F 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings andfixed to wall or ceiling or laid on floor etc incl cutting chasing where required complete all as specified an directed. |
| 31 | All as per item no 30 here-in-before but dia of GI pipe is 15mm. |
| 32 | S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etccomplete all as specified an directed. |
| 33 | All as per item no 32 here-in-before but dia of GI pipe is 15mm. |
| 34 | Cutting chases, pinning for concealed water tubing andmaking good to facing where required and pointing in cement mortar 1;3 ,cutting exc 10cm but n.exc 20cm girth complete all as specified and directed. |
| 35 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer(cylindrical vertical with closed top) in white colour hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed. |
| 36 | S & Fin repairsvitreous China coloured European type WC with \"P\" or \"S\" trapand Seat cover for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge. |
| 37 | S & F in repairs vitreous chinaware coloured wash hand basinofsize 580mm x 450mm complete including, CP Waste coupling , PVC waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Engr in charge |
| 38 | S&F in repair vitreous china squatting pan of orissa pattern long pan size510 x 400 mm white with \"p\"or \"S\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe)complete all as specified and directed by Engineer-in-Charge. |
| 39 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle,fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium platedlong body with flange complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in repair PVC connection pipe of 1/2\"x18\" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Taking down shutter Not.exc 2 sqm each of any description complete all as specified. |
| 44 | Taking down chowkats or frames not exc. 1.5 sqm each (with shutter without taking off shutter) complete all as specified. |
| 45 | Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (with shutter without taking off shutter) complete all as specified. |
| 46 | M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed. |
| 47 | S& F 35 mm thick flush shutterssolid core construction, Flush shutters shall have teak wood edging asspecified inIS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. Note :- Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting. |
| 48 | M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made,open rebated and prepared to receiveglass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed.Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting. |
| 49 | M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, shutter of cupboard/kitchen cup board/loft board complete all as specified and directed. |
| 50 | S&F L Bihari hinges conceled cabinet hinges in \"L\" Shape and hydrolic mechanism for soft closingcomplete all as specified. |
| 51 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with steel wire staples, complete all as specified and directed. |
| 52 | Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely).Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made. |
| 53 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge. |
| 54 | S&F butt hinges medium weight, cold rolled SS and fixed size of hinge 100mm complete all as specified. |
| 55 | S&F 150mm long anodised aluminum barrel tower bolt, extruded section complete all as specified. |
| 56 | S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified. |
| 57 | S&F for Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality (Make-VISTA) (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two number of latto on both end s of curtain rods, complete all as specified and directed by Engr-in-Charge. |
| 58 | Schedule of Credit |
