|
| 1 | Surface excavation not exceeding 30cm deep and averaging 15 cm deep, getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depthor for foundation etc for laying of cables, pipe etc. or for shafts, wells, manholes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 3 | Returning filling in including spreading, levelling, watering and wall ramming in layer n exc not exc 25 cm, any kind of soil , complete all as specified and directed. |
| 4 | Removing surplus excavated materialto a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point , complete all as specified and directed. |
| 5 | Material and labour for providing PCC (1:4:8) Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 6 | Material and labour for brick work with sub class \"B\" old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 7 | Material and labour rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar (1:4)and surface finishedeven & smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. ( Note- The cost of providing WPC shall be included in quoted rate under this item ) |
| 8 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applyingtwo coats of cement base paintover a coat of alkali resistant primer, complete all as specified and directed.Charge. |
| 9 | Material and labour 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement , complete all as specified and directed. |
| 10 | Material and labour 75 mm thick PCC 1:3:6 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement , complete all as specified and directed. |
| 11 | Material and labour for providing cementconcrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in filling of edges of path including form workcomplete all as specified and as directed. |
| 12 | Material and labour for vibratory rubber moulded precast coloured concrete interlocking paver block, designer, double glossy any shape and sizeconforming to IS 15658-2006, ISI marked of 80 mm thickness, grade M-40 with grey cement andpigments over and including a layer of sand cushioning, 50 mm thick,complete all as specified and as directed |
| 13 | Supply and fixing Reinforced concrete pipes, class NP2, 150 mm dia bore laid and jointed complete with collars complete all as specified and as directed. |
| 14 | Supply and fixing Reinforced concrete pipes, class NP2, 200 mm dia bore laid and jointed complete with collars complete all as specified and as directed. |
| 15 | Material and labour for black granite (of any type) tiles 16–18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over and including 10mm thick screed bed in CM (1:4) and including rounding to edges of stone slabs as in pillars andsimilar situations, complete all as specified and directed. |
| 16 | Material and labour rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging, door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-410-W (Grade E-250) quality \"A\", complete, all as specified and as directed. |
| 17 | Material and labourfor preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete, all as specified and as directed. |
