|
| 1 | Clearing grass and removal of rubbish up to adistance of 30 m outside the periphery of the area asper Technical Specifications Clause 201 for RuralRoads of MORD. |
| 2 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed.Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end.V) 200 mm diameter |
| 3 | iii) 150 mm diameter |
| 4 | ii) 125mm diameter |
| 5 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tacklesv) 20 cm av. diameter |
| 6 | iii) 15 cm. av. Diameter |
| 7 | ii) 12.5 cm av. Diameter |
| 8 | Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (DIa. to be measured at mid length). |
| 9 | Driving bamboo pins in standing or flowing water including scaffolding and driving appliances.A) where boats are not necessary |
| 10 | Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.) |
| 11 | Coal tarring on wooden surfaces including cost of materialsa) One Coat |
| 12 | Supplying at site the Nuts, Bolts and washers including carriage overhead Charges and contractors profit. |
| 13 | Supplying at site the the long nails including carriage overhead Charges and contractors profit. |
| 14 | Supplying empty Cement bags in good condition |
| 15 | Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of filling materials, (Earth or sand) and gunny bags. |
| 16 | Taking out Jhaw/Eucalyptus piles from river bed or from elsewhere including carrying, stacking materials in the nearest stack yard.(b) Above 17.5 cm. and up to 25 cm. Diameter. |
| 17 | (a) Up to 17.5 cm. Diameter |
| 18 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD.(1) By Manual Meansc) Reinforced Cement Concrete |
| 19 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD.(1) By Manual Means(b) Cement mortar |
| 20 | Labour for laying soling with departmental bricks including carriage of departmental bricks within a lead of 150 metres preparation of bed as necessary with brick joints properly filled in and packed with brick joints properly filled in and packed with local sand or powdered earth and including necessary cushion of similar materials below the soling (and in between layers when more than one layer is used(a) Single brick flat soling (thickness 75 mm) |
| 21 | Labour charge for taking out of old precast slabs from deck of bridge including cutting or breaking of old joinery works, nuts & bolts, rivets etc, if necessary and stacking of serviceable precast slabs within a lead of 90.00 m from place of removal for execution of the work to completion, as per direction of Engineer in Charge. |
| 22 | Labour charge for fitting of new/old & repaired precast slabs on deck of bridge including making good of joinery works, nuts & boltsetc, if necessary from cast yard within a lead of 90.00 m from placing for execution of the work to completion, as per direction of Engineer in Charge. |
| 23 | Labour charge for taking out of old driven Rails of any type and sizes in all sorts of soil in tidal river (both high tide and low tide) including placing the removed rails in stacks within a lead of 90.00 m with hire and labour charges of necessary appliances and all incidental situation if arises including hire charges of gas cutter etc, for cutting of old joinery works, nuts & bolts, rivets etc, if necessary for execution of the work to completion, as per direction of Engineer in Charge. |
| 24 | Labour charge for driving Rails of any type and sizes in all sorts of soil in tidal river (both high tide and low tide) including hoisting and placing the rails (in position cutting and sharpening heads if necessary before and after driving with all hire and labour charges for necessary driving appliances and in all incidental situation if arises including hire charges of heavy type of burge or pontoon fabricated with heavy staffing mounted on burge or pontoon including all devices for driving rails including fuels and lubricants, carriages, skilled labour etc. will be supplied by the agency for execution the work to completion, as per direction of Engineer in Charge. |
| 25 | M.S. structural works in columns, beams etc. with simple rolled structural members (eg joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)-1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816-1969 & IS: 1995 using electrodes of approved make and brand conforming to 15:814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumabiles such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per 15 specified weight Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg./m. or 15% of weight for finished structal members weighing less than 22.5 Kg./m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer in Charge. The rates are considered for a height of erection 8m/2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initial am, er part thereof For structural members of specified sections weighing less than 22.5 Kg/m |
| 26 | Carriage of Steel materials over pucca road with loading in to trucks at the lifting point, unloading at destination, stacking properly in go downs or yard etc. as directed including carriage by head load up to a lead of 50.00 m at each of the two points. |
| 27 | Labour charge for driving ISMB 225 or more type and sizes in all sorts of soil in tidal river (both high tide and low tide) including hoisting and placing the rails (in position cutting and sharpening heads if necessary before and after driving with all hire and labour charges for necessary driving appliances and in all incidental situation if arises including hire charges of heavy type of burge or pontoon fabricated with heavy staffing mounted on burge or pontoon including all devices for driving rails including fuels and lubricants, carriages, skilled labour etc. will be supplied by the agency for execution the work to completion, as per direction of Engineer in Charge. |
| 28 | Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction.(a) Single brick flat soling (thickness 75 mm) |
| 29 | Providing and laying nominal mix Cement concrete (with mix proportion 1:1½:3) / M-20 grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm of Pakur or other approved variety including Screening and cleaning of aggregates, if necessary, both of approved quality and cement, as necessary, compacting by vibrator or other suitabfe means, cost of curing with water, cost for quality control, sampling, testing etc. and including placing a Separation membrane of impermeable PVC sheet 125 micron thick transparent or white in colour laid flat with minimum creases. Before placing the separation membrane, the sub-base shall be swept clean of all the extraneous materials. Wherever overlap of plastic sheets is necessary, the same shall be at least 300 mm and any damaged sheathing shall be replaced at the Contractor\"s cost, including carriage of all materials to site but excluding the cost of staging, shuttering and and reinforcement if any. |
| 30 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and directiona) where staging is not requied |
| 31 | Supplying spreading and compacting silver sand to required thickness in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction including cost of silver sand lighting, guarding, barricading and making adequate earthen bundh where necessary, with water as per direction, mending cracks and depressions by ramming wherever necessary. |
| 32 | Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every tersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. |
| 33 | First class Brick work in cement sand mortar in steining of well, pier, abutment, wing wall, parapetsb cross drain. H.P. culverts, guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials.(a) In 1:4 proportion. |
| 34 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:3 cement mortar(a) 15mm thick plaster |
| 35 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:- Cement 0.152 cu.m per 100 sq.m. |
| 36 | Providing weep holes (150x75)mm in abutment or wing wall for the entire thickness with slope 1:20 towards drainage surface, including packing with different sizes of brick bats or boulders of approved quality and sizes at the back side as per direction of the Engineer-in-Charge. |
| 37 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre Including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 38 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 39 | Removing old paint from blistered painted surface of steel or other metalby chipping including scraping and cleaning and exposing the original surface |
| 40 | Painting with ready mixed red lead paint of approved make and brand:a) One Coat |
| 41 | (B) Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface:a) Two Coat |
| 42 | Add GST @ 18% (CGST+SGST) |
| 43 | Labour Welfare Cess @ 1% Please Enable Macros to View BoQ information |
