|
| 1 | Civil work |
| 2 | Dismantling of old existing Gate 6.00 m x 1.80 m height and stacking serviceable material at site. |
| 3 | Demolishing existing footpath and reconstructed using similar tiled/block materials as per dimensions shown on plan to proper level and slopes to match with surrounding / adjoining portion of footpath. |
| 4 | Demolishing existing Sewer/Storm water chamber and reconstruction the same with all pipe connections and masonry work all complete as per the direction. |
| 5 | Water Inlet Relocation as per existing size and in similar design / dimensions / slopes / grating cover etc. |
| 6 | Demolishing cement concrete including disposal of material within 50 metres lead :Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix |
| 7 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 8 | Dismantling of existing Granite stoneand stacking the serviceable material within 50mtr lead at site. |
| 9 | Disposal of moorum/building rubbish/malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 10 | Excavation forfoundations, substructures, walls, chmbers, manholes, trenches, poles, pits & general building works in all types of soils for depth/lifts upto 1.50 m measured from the ground level,including dressing/trimming the sides,levelling and ramming of bottoms, manual dewatering,removing rank vegetation,excluding shoring,strutting etc complete. |
| 11 | Filling in plinth,floors,trenches,pits with approved excavated materials-murum/good earth in layers not exceeding 200mm including breaking of clods,watering,consolidating each layer in filled up area by rolling and compactingwith roller/plate compactor all complete as per the direction. |
| 12 | Providing,Laying dry stone rubble soling with average 150mm size and minimum thickness 230 mm hard stone set in regular lines to form plane surface,hand packed and interstices thoroughly filled with small chips including providing and laying gravel quarry spells underneath for levelling undulations of the ground with compaction of material etc all complete as per the direction. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering an shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(PCC - M15 Concrete 150 mm Thick) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(PCC - M15 Concrete) |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for5.9.1 Foundations, footings, bases of columns, etc. for mass concrete |
| 15 | Steel reinforcement for R.C.C. work ready to use “cut and bend” rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level and above plinth level.5.22B.1 and 5.22C.1Thermo-Mechanically Treated bars of grade Fe-500D or more. ( TATA tiscon 500D with GFX coated bars) |
| 16 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum (In Sub-structure) |
| 17 | All works above plinth level upto floor V level 5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum(In Superstructure) |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in :6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 19 | 18 mm thick single coat cement sand Plaster in 1:4 mix with grooves for fixing granite stone cladding ---18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 20 | Providing and applying Textured Plaster on Columns as per design and drawings all complete as per the direction. |
| 21 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (Asian Apex Ultima or equivalent) |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby redArea of slab upto 0.50 sqm |
| 23 | Area of slab over 0.50 sqm |
| 24 | Providing and fixing Acrylic Cover Sheet with necssary framework and fittings all complete as per the direction. |
| 25 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 26 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.10.16.1 Hot finished welded type tubes |
| 27 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in-Charge.Granite work |
| 28 | Providing and fixing new 30 feet x 5 feetGranite plate & engraving golden Hindi,Marathi, English letters and ICAR CIRCOT logo Emblems for our Institute Name plate to be fixed on front top of new main gate RCC perdi including painting, polishing the letters/figures with approvedcolour /shade and frame work of Granite pattie all around the plate on the given location including cement mortar, Masonry work, Scaffolding and Transportation charges all complete as per the direction.(1 N0) |
| 29 | Providing and fixing new 3 feet x 4 feet Granite plate & engraving golden English letters and Emblems for our Institute Name plate to be fixed on front of new main gate RCC Pillar including painting, polishing the letters/figures with approvedcolour /shade on the given location including cement mortar, Masonry work and Transportation charges all complete as per the direction.(2 N0) |
| 30 | Providing and fixing new 8.52 feet x 2.62 feetGranite plate & engraving golden Hindi,Marathi and English letters and Emblems for our Institute Name plate to be fixed on front compound wall along Adenwala road including painting, polishing the letters/figures with approvedcolour /shade and frame work of Granite pattie all around the plate on the given location including cement mortar, Masonry work and Transportation charges all complete as per the direction.( 3 No) |
| 31 | Providing and fixing CIRCOT Office address Name board of size (2.20ft x 10ft) of letter size 112 inch x 5.5 inch in Hindi,Marathi and English alphabet lettering work both in vinyle cutting and pasting work on ACP/Acrylic sheet with aluminium channel boxbase frame work and fixing the same on the given location including Transportation charges all complete. (2 no) |
| 32 | Electrical work:- Providing and layingElectric Wiring (3 Core flexible wie) with the size 2.5 mm in PVC conduit all complete as per the direction. (Polycab wire) |
| 33 | Providing and fixing LED spotlights (Philips) of 30 Watts capacity with tube/bulb along with conncection cable for highlighting newGranite stone engraved letteringname board including all GI Pipe and clamp fittings all complete as per the direction. |
| 34 | Providing and fixing 4ft length LED Tube lights surface fitting (Philips) with tube along with conncection cable to be connected in new LED name boardfor fittingof 22 Watts. |
