|
| 1 | Taking down cement plaster complete all as specified and directed. |
| 2 | M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition complete all as specified and directed. |
| 3 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work & also including demolition of existing PCC complete, all as specified and directed. |
| 4 | M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 5 | M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement complete all as specified and directed. |
| 6 | M & L rendering15 mm thick in cement mortar 1:4 in two layers,10 mm thick plaster infirst coat with WPC and second coat of 5 mm thick with WPC as per manufactures instruction, surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. (WPC will be measured and paid separately) |
| 7 | Supply only liquid water proofing compound all as specified and directed |
| 8 | Complete removal of exisiting wall treatment onold plaster or concrete surface by scraping tin plate, leaned of all laitance , loose material, oil grease by mechanical means such as wire brushing & shot blasting , finally vacum cleaning of all loose solid particals complete all as specified and directed. |
| 9 | M&L forapplying 1 mm thick wall care putty on wallon internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed |
| 10 | M & L for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all includingwashing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed. |
| 11 | M & L preparing of plastered or unplastered surfaces of walls, cornices etc and applying two coats of Dr Fixit Raincoat Elastomeric Acrylic water proof exterior coating or equievalent over one coat of primer of DR Fixit Primesea or equievalent, complete all as specified and directed. |
| 12 | M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed. |
| 13 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fitting ,heads,shoes,bends,swan-necks,etc complete all as specified and directed. |
| 14 | S & FPVC pipes 110 mm bore single socketed in any length withrubber ring joint and fixed to walls incluidng clamping complete all as specified and directed. |
| 15 | S & F PVC bends 110 mm bore any radius with solvent cementjoints, fixed complete all as specified and directed. |
| 16 | S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed. |
| 17 | M & L for reparing of RCC projection, chajjas,roofs,facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 3 storey bldgs complete all as specified & directed (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor). |
| 18 | S & F in repairs vitreous china squatting pan \"Orissa patern\" size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed. |
| 19 | S & F in repairs Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, includingseat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 20 | S & F in repairs10 litres capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of PVC 32 mm dia and connection to pipes complete all as specified and directed. |
| 21 | S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed. |
| 22 | S & F in repairs Vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed. |
| 23 | S & F in repairs vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe complete all as specified and directed. |
| 24 | S&F in repairsPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls incluidng clamping complete all as specified and directed. |
| 25 | S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cementjoints, fixed to complete all as specified and directed. |
| 26 | Description all as per item No 25.00 above in but using bore of pipe 75 mm.complete all as specified and directed. |
| 27 | S & F in repair110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal, joints with solvent cement,complete all as specified and directed. |
| 28 | S & F in repair PVC (SWR) nahani trap/floor trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed. |
| 29 | S & F110 mm bore PVC(SWR) vent cowl including taking out existing unserviceable cowl complete all as specified and directed. |
| 30 | S & F of CPVC 20 mm outer dia pipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed. |
| 31 | S & F of CPVC 25 mm outer dia pipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed. |
| 32 | S & F of CPVC brass elbow (3/4\" X ½\") for 20 mm outer dia CPVC pipe complete all as specified and directed. |
| 33 | S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25 mm outer dia pipe complete all as specified and directed. |
| 34 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified. |
| 35 | S&F 8 to 10 mm hollow PVC Wall Lining inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing specified and directed complete. |
| 36 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed. |
| 37 | M & L 12 mm thick Gypsum Board as in ceilingor wall penalling fixed with screwsas per manufactur\"s instructions complete all as specified and directed. |
| 38 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 39 | S&F Rotational moulded poly-ethylene water storage tanks(triple layered)( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed. |
| 40 | S&F Rotational moulded poly-ethylene water storage tanks(triple layered)( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 500 ltr but not exc 1000 ltr, complete all as specified and directed. |
| 41 | S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 25mm-455 gms.) complete all as specified and directed. |
| 42 | Demolition of reinforeced cement concrete beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 43 | S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 44 | S & F in repairs 15 mm bore bib taps chromium plated fancy type cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, and fixed complete all as specified and directed. |
| 45 | S & F in repair Bidet spray (Health faucet) with 1 metertube and holder, complete all as specified and directed. |
| 46 | S & F in repairs chromium plated fancy type stop cock/angle cock 15 mm dia cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipeor for unions and fixed, complete all as specified & directed. |
| 47 | S & F in repairs 15 mm bore two way bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 48 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia D type 60 cm long between flanges complete all as specified. |
| 49 | S&F mm dia bore fancy type chromium plated swan neck pillar tap, cast copper alloy, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 50 | S&Fbevelled edge looking mirror of selected quality glass,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden /pvc plugs with chromium plated brass screws and cup washer |
| 51 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each and removal from site ,all as specified and directed |
| 52 | Taking Down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each incl removal from sitecomplete all as specified and directed. |
| 53 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 54 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges andnecessary S.S screws shall be paid separately) |
| 55 | S & F aluminium(extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 56 | S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed. |
| 57 | S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed. |
| 58 | S & Fbutt hinges, size 100 mmtype C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed |
| 59 | S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed. |
| 60 | M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (featheredged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed. |
| 61 | S & F 2 nd class hard wood30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads,for securing glass etc, sizes of members of shutters as in windows and ventilators as specified in SSR Part-I, section 8, clause 8.24(b) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately inrespective supply only item. |
| 62 | S & F of 2nd class hard wood plain solid straight chow hats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed. |
| 63 | S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 64 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be following specification complete all as specified and directed(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(iv)4 mm thick tintedglass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(vii)Sliding rollers per shutter - 02 Nos.(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. |
| 65 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 66 | M&L Granite 18 to 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and likeincluding pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4 complete all as specified and directed |
| 67 | M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified & directed. |
| 68 | M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as complete all as specified and directed |
| 69 | -Ditto- but as in riser of steps, skirting, dado and vertical surfaces including 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 70 | M & L machine pressed precast concrete 60mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sandcushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape asapproved, complete all as specified and directed. (Note : Sandcushioning shall be measured and paid separately) . |
| 71 | M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc. complete all as specified and directed. |
| 72 | M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed |
| 73 | M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed. |
| 74 | Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 75 | M & L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course in floor including demolition of PCC, complete all as specified and directed. |
| 76 | M&L vitrified ceramic tiles mat finished light shade 08 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed |
| 77 | -Ditto- but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 78 | M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed |
| 79 | -Ditto- but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 80 | M&LGlazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles inCement mortar 1:4, complete all as specified and directed. |
| 81 | S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall becoated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site allas specified and dircted. |
| 82 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed |
| 83 | M & L for 3 mm thick figuredglass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane. complete all as specified and directed |
| 84 | S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mmand fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 85 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 86 | S & F Anodised aluminium sanp grid 605 x 605 mm frame work for false ceiling, complete all as specified and directed |
| 87 | M & L exposed metal frame ceiling with 8 mm th calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm gridcomplete all as specified and directed. (Note :- Frame work for ceiling shall be measured and paid seprately) |
| 88 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as specified and directed. |
| 89 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat molded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and complete all as specified and directed. |
| 90 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level. complete all as specified and directed. |
| 91 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 92 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 sqm but n.exc 4 sqm each and removal from site ,complete all as specified and directed. |
| 93 | M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed. |
| 94 | M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement priming coat complete all as specified & directed. |
| 95 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 96 | M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 97 | M&L Preparation of new painted Brick, stone, concrete, AC or plastered surfaces of of walls any description over 10 cm width or girth , not otherwise described and applying one coat of primer and two coats ofplastic emulsion paint complete all as specified and directed including 1 mm thick putty. |
| 98 | M & L preparing of newly plastered surfaces ofwall , pillasters, cornices etc and applying two coats of coloured acrylic water emulsion paint over a coat of precoated treatement as manufacturer instruction complete all as specified and directed. |
| 99 | M & L preparing old decorated plaster or un-plastered surfaces of ceiling andapplying one coatof white wash includingwashing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed. |
| 100 | Cleaning and removing all scale and dirt and elgy using wire/jute from inside of RCC /PVC tanks and connected pipe removing to a distance of not less than 250 mtrs,washing the tank/ipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection,including marking with black/white paint on white/black base on tank \"Tank cleaned on________Dt________\"exc 250 litre & n.exc 500 litre complete all as specified and directed. |
| 101 | Cleaning and removing all scale and dirt and elgy using wire/jute from inside of RCC /PVC tanks and connected pipe removing to a distance of not less than 250 mtrs,washing the tank/ipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection,including marking with black/white paint on white/black base on tank \"Tank cleaned on________Dt________\"exc 500 litre & n.exc 1000 litre complete all as specified and directed. |
| 102 | S & F powder coated aluminumdoorwith the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a)Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b)Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d)Bottom rail of cross section 114x44x2mm thick.(e)Locking rail (middle rail ) of cross section 83x44x2mm thick. (f)4mm thick tinted glassmake Modi, float . (g)Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h)Aluminum door stopper heavy duty-01 Nos per shutter. (i)Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j)Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. |
| 103 | Taking down Aluminium door shutters exc 1 sqm and n exc 2 Sqm eachand refixing in sameopeningafter resetting ,, resecuring or easing & adjusting including necessary bolts and nuts, securing rods , washers etc complete all as specified and directed . |
| 104 | S&F in repair Table topofCounter tablewash hand basins, vitreous china,of any size standerd size(flat back, or angle back type)including cutting for and pinning in ends of brackets or erecting standinclusive of fixing of supply and waste pipeetc complete all as specified and directed. |
| 105 | S & F in repair ofvitreous china single Piece EWC of size 67.5 × 35.5 × 72 cm,With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 106 | S & F in repair of CP brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 107 | S & F in repairs of CP Brass Fancy type shower rose 75 mm dia with 125mm long CP Nipple of approved quality complete all as specified and directed. |
| 108 | S & F in repairs of CP Brass Fancy type shower rose 125 mm dia with 125mm long CP Nipple of approved quality complete all as specified and directed. |
| 109 | S&F in repair 15 mm bore basin mixture Fancy Type brass chromium plated with capstan headsscrewed down high pressure with orwithoutletter ‘HOT’ or‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 110 | S&F in repair chromium plated brass wall mixer 15mm, 3-in-1 fancy type with provision for both hand shower and overhead shower complete with wall flange (excluding hand & over head Shower) screwed down for 15 mm GI bore pipe, complete all as specified and directed. |
| 111 | S & F in repair Sink Mixer 15 mm CP Fancy exclusive type complete all as specified and directed. |
| 112 | S & F in repairs of Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. |
| 113 | S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf60mm wide with chromium plated bracket guard and railing 500mm long completeall as specified & directed. |
| 114 | S&F in repairs corner glassshelf 5.5mm thick with aluminium bracket and railing as per sample, complete all as specified and as directed. |
| 115 | S&F in repair stainless steel kitchen plate rack made out of1mm thick stainless steel of size 900 x 600 mm ofbest quality of approved make, complete all as specified and as directed. |
| 116 | S & F in repair of PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified and directed. |
| 117 | S & F in repair of plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed. |
| 118 | S&F in repair of stainles steel gratingsround type 100mm size of(Min Weight100 gms) complete all as specified and directed. |
| 119 | S & F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified |
| 120 | S & F in repairs for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified |
| 121 | S & F Brass200 mm long anodised barrel tower bolts with cast or sheet barrel and rolled cast bolts and fixed, complete all as specified and directed. |
| 122 | S & F in repair Brass 150 mm long anodised barrel tower bolts with cast or sheet barrel and rolled cast bolts and fixed, complete all as specified and directed. |
| 123 | S & F in repair 150 mm size Brass handles cast type, anodisedwith cast or sheet barrel and rolled cast bolts and fixed, complete all as specified and directed. |
| 124 | S & F in repair300 mm Brass , anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast brass and fixed, complete all as specified and directed. |
| 125 | S & F in repair brass Mortice lock vertical type of size 100mm with 2 levers including escutcheon plate and two keys complete all as specified and directed. |
| 126 | S & F in repair Mild steel barrel tower bolts 100mm , stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 127 | S&F in repairs of Mild steel pressed handles 150 mm, oval type, stove enamelled black complete all as specified |
| 128 | S & F in repair of mild steel door closer complete all as specified and as directed |
| 129 | S & F in repairsof aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 130 | S & F in repair of Mild steel sliding door bolts of length 300mm , plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 131 | S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lapping bending for 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc complete including taking down , complete all as specified and directed. |
| 132 | S & F in repair 30 mm width of flaps (when open) Continous (piano) hinges , mild steel, bright finish or electrogalvanised , complete all as specified and directed. |
| 133 | M&L welding in repairs not exceeding 2.5 cm in length to the metal not exceeding 6mm thick complete all as specified and as directed. |
| 134 | S&F in repair toughned glass 12 mm thick as in hinged doors, partitions automatic doors, partition of wall and similar work including cutting to shape, drilling hole with necessary arrangements for fixing also included handles, hinges, support channel for fixing in any position, complete all as specified and directed. |
| 135 | S & F in repairs wall mounted (one piece) EWC with including necessary fitting like anchor bolt seat cover and other connecting kits etc complete all as specified and directed. |
| 136 | Item No 193 : S & Fmodular type stainless steel basket size 500 mm x 530 mm x 100 mm (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangementcomplete as specified and dirceted. |
| 137 | Item No 196 : S&F 100mm size MS mat/glossy finish handle complete as specified and directed. |
| 138 | Item No 197 : S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete as specified and directed. |
| 139 | Item No 198 : S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete as specified and directed. |
| 140 | Item No 199 : S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed. |
