|
| 1 | M & L for Roughening / taking down existingroof treatment surfaces including plaster over old concrete roofby picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed. |
| 2 | M & L Brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces all as specified and directed. |
| 3 | M & L Cutting out cracks to 6 mm wide\"V\" section in existing roofs or terrace (if cracks> 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement Sand slurry in the proportion of (1:3) by weight mix oras per manufacturers instructions all as specified and directed complete. |
| 4 | M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately. |
| 5 | M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITEINDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified.Note:-Liquid WPC shall be measured and paid separately. |
| 6 | Supply only liquid water proofing compound. |
| 7 | M&L Water proofing treatment on \"Non approachable / non accessible roof\" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed (i) Cleaning of new rendered surface properly and drying the surfaces.(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg/ Sqm.(iii)Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by \"torchon\" method. (iv) Applying two coats of bitiminous aluminium pait @ 200 Gram / Sq M (minimum) in two coats. Make incorporated : HYPERPLUS of IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd / STP Ltd all as specified and directed |
| 8 | Dismantling PVC water tanksExc 250 ltrs but not 500 ltrs including taking down of float valve and removing from site all as specified and directed |
| 9 | S&F1000 Ltrs capacity double layer (ISI marked) rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I all as specified and directed |
| 10 | S&F in repair ball valve/float ballhigh pressure of PTMT 20mmwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimum+B31 weight 210 gm etc all as specified and directed. |
| 11 | Taking up or down existing steel tubing and connection all as specified and directed for following sizes:- |
| 12 | (a)15 mm dia |
| 13 | (b)20 mm dia |
| 14 | Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, all as specified and directed for the following sizes: - |
| 15 | (a)15mm dia bore |
| 16 | (b) 20 mm dia bore |
| 17 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. |
| 18 | M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 19 | M&L glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cementmortar 1:4 complete all as specified and directed. |
| 20 | M & L for vitrified cerameic tiles 8 to10mm thick light shade (square/rectangular)polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 21 | M & L25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including finishing surface of concrete topping even and rough complete as in levelling work etc complete all as specified and directed. |
| 22 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 23 | M&L Granite 18-20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill ofparapit wall over12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE |
| 24 | M & L 20 - 22 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 25 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame all as specified and as directed. |
| 26 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame ) |
| 27 | S & F factory made 100% solid WPC (Wood polymer composite) Door frame 65mm X 100mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company , having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/ borer proof , water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length , all as per specifications drawings as directed by the Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company including hold fast or fasteners, complete all as specified and as directed. |
| 28 | S & F factory made 30 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company , having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free , water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws , all as per direction ofEngineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and as directed. |
| 29 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tubeall as specified and as directed. |
| 30 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat molded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and all as specified and as directed. |
| 31 | S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and as directed.. |
| 32 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed all as specified and as directed. |
| 33 | S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed all as specified and as directed. |
| 34 | S & F 150 mm size aluminium handles cast type, anodised ISI marked all as specified and as directed. |
| 35 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed all as specified and as directed. |
| 36 | S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame /wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making goodall as specified and as directed. |
| 37 | S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 38 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 39 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 40 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ;barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 41 | S&F18mm thickfactory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade all as specified and directed. |
| 42 | M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified anddirected. |
| 43 | M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed. |
| 44 | S & F in repairs Galvnised mild steel wire cloth, 0.56mmconforming toI Snominal dia of wire and average width of aperture 1.18 mmand fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 45 | Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed |
| 46 | M&L Brick work with fly ash bricksstraight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 47 | M&L forrendering in cement mortar (1:6) 10mm thickfirst coaton fair faces ofbrick walls or concrete surfacesand in cm 1:4 5mm thicksecond coatoverfirst coat , mixed with water proofing compound as per manufacturer instructions, finishe fair andevenwithout using extra cement all complete all as specified and directed incl taking down existing plaster. |
| 48 | Supply only Integral water proofing compound |
| 49 | M&L for rendering 10mm thick plastering in CM (1:6) finished even &fairall as specifiedincl taking down plaster. |
| 50 | M&L for rendering 5mm thick in CM 1:3 as insoffits ofceiling and Rcc cjhaja/Faciaroof projectionsfinished fair&evenall as specifiedincl taking down plaster |
| 51 | M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed. |
| 52 | Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc complete all as specified and as directed. |
| 53 | M&L forapplying 1 mm Avg thick wall care putty on wallon internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed |
| 54 | M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as specified and as directed |
| 55 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level. |
| 56 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement |
| 57 | S & F in repairsSink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mmcomplete all as specified and directed. |
| 58 | S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etcall as specified and directed.Note :- Pillar tape shall be measured as supply only under respective item |
| 59 | supply only 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter \"HOT\" or \"COLD\"with long screwed shanks fly nuts, screwed for iron pipe complete all as specified and directed. |
| 60 | S & F in repairs Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, includingseat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 61 | Supply only10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed.Note:-Fixing only rate is included in item Noabove. |
| 62 | Supply only PVC connection pipe 15 mm dia 450 long with PTMT nut at both endsall as specified and directed. |
| 63 | S&F in repair 600mmx450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipeor brass ferrule, complete all as specified and directed. |
| 65 | S & F in repair brass chromium plated towel rail 20 mm outer dia Brackettype, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, all as specified and directed. |
| 66 | S & F in repair over head shower with arm & flnge of chromium plated with or withoutswivel joints, any size, including fixingto 15mm dia steel pipe for required lengthor union complete all as specified and directed |
| 67 | S&F in repair 15 mm dia consealedtype stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed |
| 68 | S&F 15mm dia long body CP Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed ll as specified and directed |
| 69 | S & F in repairs of Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. |
| 70 | S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete complete all as specified and directed |
| 71 | S & F in repair PVC bath cabinet box mirrortype with shutter ll as specified and directed |
| 72 | S&F harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specifed and as directed. |
| 73 | S & F in repair cornershelf of 300 mm size with ABS brackets complete all as specifed and as directed. |
| 74 | S & F in repair Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as complete all as specifed and as directed. |
| 75 | S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specifed and as directed. |
| 76 | S & F in repair110 mm dia bore. PVC (SWR) pipes single socketed in any length withrubber ring joints,laid in floor/ trenchescomplete all as specified and directed. |
| 77 | S & F in repair75mm dia borePVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenchescomplete all as specified and directed. |
| 78 | S & F in repair110 mm dia bore. PVC (SWR) pipes single socketed in any length withrubber ring joints,fixed to wallscomplete all as specified and directed. |
| 79 | S & F in repair75mm dia borePVC (SWR) pipes single socketed in any length withrubber ring joints, fixed to wallscomplete all as specified and directed. |
| 80 | S & F in repair 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 81 | S & F in repair 75mm dia borePVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 82 | S & F in repair110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 83 | S & F in repair75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 84 | S & F in repair110 mm dia bore PVC (SWR) vent cowlrubber ring joints, fixed complete all as specified and directed. |
| 85 | M/L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type soil complete all as specified and directed |
| 86 | M & LPCC 1:4:8 type D-2 using 100 mm graded stone aggregate as inmas concrete complete all as specified and directed. |
| 87 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 88 | M & L 60mm thick Machine pressed precast concrete interlocking paver blockfixing with grey cement and pigmentsOF \" I \" shape or as approved by GE ,and anycolour and size confirming to IS 15658-2006 of M-35 Grade set , laid over 50 mm (average) thick dust sand cushioning,filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surfce even and smooth complete all as specified and as directed. Note : Sand cushioning shallbe measured and paid separately . |
| 89 | S & F Joist channel, angle or tee, square or rectangular tubler sections fixed independently or as purlin, rafter or post incl cutting to dead length where required notching drilling firing riveting and/or welding or connecting with bolts and nuts providing and fitting angle cleats fish plates, gusset plates etc complete all as specified and directed (Fe-410-W (gde-E-250) quality A) |
| 90 | S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall becoated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site allas specified andas dircted. |
| 91 | M&L for preparationold decorated surface of wall/ceilling to be done by mechanical means/smart painting technique coats of acrylic latex base exterior grade (100% ACRYLIC) over a coat of primer at any height including necessary scaffolding complete alongwith five year warrantly complete all as specified and directed .Note:- Painting work shall be executed through authorized and certified applicator of paint manufactures of paint companies. 2. Approval shall be obtained from GE for make/manufacturers and applicator before engagement in the work. 3. Contractor shall provide five year writtenguarantee certicate for the paint work. |
| 92 | M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed |
| 93 | S&F in repairs shelf glass assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with CP bracket guard and railing 600 mm long all as specified and directed. |
| 94 | M&L 600x600x4 mm thick HPSC oceanic pre primed self embossed textured designer board water , termite and fire resistant as in ceiling or wall panelling fixed with screws as per manufracture instructionsincluding dismantling complete all as specified and directed. |
| 95 | S&F 605X605mm Anodised aluminium snap grid frame work for false ceilingincluding Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all asspecified and directed. |
| 96 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 97 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing specified and complete all as specified and directed. |
| 98 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed. |
| 99 | Dismantling timber scantlings unframed of any section, in any position complete all as specified and directed |
| 100 | S&F in repair stainless steel kitchen plate rack made out of1mm thick stainless steel of size 900 x 600 mm ofbest quality of approved make, complete all as specified and as directed. |
| 101 | S&F in repairs ofhealth faucet with S.S.flexible pipe of 1.00 metrelength including holdercomplete all as specified and as directed.Make: Essco series of Jaquar or equivalent series in other makes. |
| 102 | S&F in repairs of fancy type chromium plated two way bib cock of 15mm bore,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.Make: Essco series of Jaquar or equivalent series in other makes. |
| 103 | S & FSteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 104 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed at site. |
| 105 | Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 106 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 107 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 108 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 109 | (a) One light point controlled by one, one way switch 5 Amps |
| 110 | (b) One c/ fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 111 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 112 | (d)One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 113 | Description all as per item No 104.00 above in butusing 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 114 | Description all as per item No 104.00 above in but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) |
| 115 | S & F for Modular Switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified and as directed. |
| 116 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and as directed. |
| 117 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 118 | S & F forModular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 119 | S & Ffor modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 120 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified and as directed. |
| 121 | M&L for Modular angular holder with LED Bulb 9 watts complete all as specified and as directed |
| 122 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 123 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 1.5 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 1.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 1.5 sqmm cable,one run of 1.5 sqmm cable and one run of PVC conduit will be measured as one unit |
| 124 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 125 | S & F for sheet metal enclosure MCBDBSPN4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 126 | S & F for sheet metal enclosure MCBDBSPN2 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 127 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 128 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 129 | M&L for single pole and earth encolsure with a ttwo pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed. |
| 130 | S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal includingwritting the MES Number with synthetic enamel paintcomplete all as specified and as directed. |
| 131 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 132 | Supply and laying and testing Cable XPLE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of6 sqmm4 core all as specified and as directed. |
| 133 | Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed. |
| 134 | M&L fine sand cushioningfor cable protection in layers incl punning all as specified and directed. Note : Punned down thickness shall only be measured. |
| 135 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. |
| 136 | S & F tubes, \"light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. |
| 137 | Returning, filling in, trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed. |
| 138 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point all as specified and as directed. |
| 139 | S & FLED bldg security light fitting30wattmade up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete incl mounting pipe made of GI tubing 40 mm size 1M length bend into size with mounting brackets nut bolt and washers all as specified and directed. |
| 140 | S&F in repairs 10 W LED batten 2 feet long, wall mounted, extruded aluminum heat sink all as specified and directed |
| 141 | S&F in repairs 20 W LED batten 4 feet long, wall mounted, with integrated electronic driver, ISI marked complete all as specified and directed. |
| 142 | S&F air freshener fan 200 mm sweep, 900 RPM, PVC body AC single phase 230 volt complete all as specified and directed |
| 143 | M & L for road cutting for laying of cable or pipe incl finishing as per exising road after cutting of road all as specified and directed |
| 144 | M&L for wall fans 450 mm sweep, 230 volts, 50 Hzcomplete with mounting brackets all as specified and directed |
