|
| 1 | Centre Bit - as per Sl.No.1 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 2 | Centre Bit - as per Sl.No.2 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 3 | Centre Bit - as per Sl.No.3 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 4 | Centre Bit - as per Sl.No.4 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 5 | Tap Wrench - as per Sl.No.5 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 6 | Tap Wrench - as per Sl.No.6 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 7 | Tap Wrench - as per Sl.No.7 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 8 | Tap Wrench - as per Sl.No.8 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 9 | Die Wrench - as per Sl.No.9 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 10 | Die Wrench - as per Sl.No.10 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 11 | HSS Dies - as per Sl.No.11 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 12 | HSS Dies - as per Sl.No.12 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 13 | HSS Dies - as per Sl.No.13 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 14 | HSS Dies - as per Sl.No.14 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 15 | HSS Machine Tap - as per Sl.No.15 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 16 | HSS Spiral Flute Machine Tap - as per Sl.No.16 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 17 | HSS Spiral Flute Machine Tap - as per Sl.No.17 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 18 | HSS Spiral Flute Machine Tap - as per Sl.No.18 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 19 | HSS Spiral Flute Machine Tap - as per Sl.No.19 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 20 | HSS Hand Tap - as per Sl.No.20 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 21 | HSS Hand Tap - as per Sl.No.21 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 22 | HSS Hand Tap - as per Sl.No.22 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 23 | HSS Hand Tap - as per Sl.No.23 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 24 | HSS Hand Tap - as per Sl.No.24 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 25 | HSS Hand Tap - as per Sl.No.25 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 26 | Self-adjusting Knurling Tool Holder -as per Sl.No.26 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 27 | Knurling Tool Quick Acting - as per Sl.No.27 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 28 | HSS Knurling Wheels - as per Sl.No.28 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 29 | Single Point Diamond - as per Sl.No.29 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 30 | HSS Machine Reamer-4 H7 - as per Sl.No.30 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 31 | HSSMachineReamer-5 H7 - as per Sl.No.31 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 32 | HSS MachineReamer-6 H7 - as per Sl.No.32 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 33 | HSS MachineReamer-8 H7- as per Sl.No.33 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 34 | HSS MachineReamer-10 H7 - as per Sl.No.34 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 35 | HSS Machine Reamer-12 H7 - as per Sl.No.35 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 36 | HSS Machine Reamer-15 H7 - as per Sl.No.36 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 37 | Hack saw Frame- as per Sl.No.37 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 38 | Hack saw Blade - as per Sl.No.38 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 39 | Ball Pin Hammer - as per Sl.No.39 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 40 | Rubber Hammer - 2inch- as per Sl.No.40 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 41 | Combination Spanner set - as per Sl.No.41 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 42 | Lathe Dog-Bent Type -as per Sl.No.42 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 43 | Lathe Dog-Bent Type -as per Sl.No.43 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 44 | Lathe Dog-Bent Type - as per Sl.No.44 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 45 | Lathe Dog-Bent Type - as per Sl.No.45 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 46 | Bench Vice -200mm -as per Sl.No.46 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 47 | Bench Vice -200mm -as per Sl.No.47 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 48 | Wheel Dresser - as per Sl.No.48 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 49 | Plain Combined Drill - as per Sl.No.49 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 50 | Plain Combined Drill - as per Sl.No.50 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 51 | Plain Combined Drill - as per Sl.No.51 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 52 | Ratchet Type Wrenches - as per Sl.No.52 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 53 | Letter Punch - as per Sl.No.53 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 54 | Number Punch - as per Sl.No.54 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 55 | Parting Tool - as per Sl.No.55 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 56 | Parting Tool Inserts - as per Sl.No.55A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 57 | Clamp screw - as per Sl.No.55B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 58 | Wrench - as per Sl.No.55C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 59 | Parting Tool - as per Sl.No.56 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 60 | Parting Tool Inserts - as per Sl.No.56A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 61 | WRENCH TORX - as per Sl.No.56B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 62 | Clamp Screw - as per Sl.No.56C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 63 | Parting Tool Holder- - as per Sl.No.57 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 64 | Parting Blade - as per Sl.No.57A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 65 | Parting Inserts - as per Sl.No.57B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 66 | Parting Tool Holder - as per Sl.No.58 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 67 | Parting Blade - as per Sl.No.58A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 68 | Parting Insert - as per Sl.No.58B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 69 | SCREWS - as per Sl.No.58C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 70 | Allen Key _Spares as per Sl.No.58D of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 71 | Boring Bar - as per Sl.No.59 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 72 | Insert Screws - as per Sl.No.59A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 73 | Boring Bar - as per Sl.No.60 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 74 | INSERT SCREWS -as per Sl.No.60A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 75 | Boring Bar - as per Sl.No.61 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 76 | Inserts for the Boring Bars - as per Sl.No.61A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 77 | Insert Screw- as per Sl.No.61B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 78 | Boring Bar - as per Sl.No.62 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 79 | INSERT SCREW- as per Sl.No.62A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 80 | Boring Bar - as per Sl.No.63 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 81 | Inserts for Boring Bars - as per Sl.No.63A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 82 | INSERT SCREW - as per Sl.No.63B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 83 | Boring Bar - as per Sl.No.64 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 84 | Inserts for Boring Tool - as per Sl.No.64A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 85 | Insert Screw- as per Sl.No.64B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 86 | TORX-WRENCH - as per Sl.No.64C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 87 | Boring Bar - as per Sl.No.65 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 88 | Inserts for boring bar- as per Sl.No.65A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 89 | SHIM _Spares - as per Sl.No.65B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 90 | SHIM PIN _Spares - as per Sl.No.65C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 91 | Lever _Spares - as per Sl.No.65D of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 92 | Clamp Screws _Spares - as per Sl.No.65E of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 93 | Turning Tool - as per Sl.No.66 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 94 | Turning Tool - as per Sl.No.67 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 95 | Insert lever- as per Sl.No.67A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 96 | Lever screw- as per Sl.No.67B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 97 | Insert shim - as per Sl.No.67C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 98 | Insert shim - as per Sl.No.67D of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 99 | Key - as per Sl.No.67E of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 100 | Threading Tool- as per Sl.No.68 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 101 | Threading Tool- as per Sl.No.69 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 102 | Inserts for Internal ThreadingTool- as per Sl.No.69A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 103 | Inserts for Internal ThreadingTool- as per Sl.No.69B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 104 | Clamp - as per Sl.No.69C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 105 | Key for threading tool - as per Sl.No.69D of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 106 | Shim or washer - as per Sl.No.69E of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 107 | Screws with head- as per Sl.No.69F of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 108 | Threading Tool - as per Sl.No. 70 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 109 | Threading Tool - as per Sl.No. 71 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 110 | Inserts for External Threading Tool - as per Sl.No. 71A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 111 | Inserts for External Threading Tool - as per Sl.No. 71B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 112 | Shim or washer - as per Sl.No. 71C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 113 | Screws with head - as per Sl.No. 71D of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 114 | Screws with head and washer - as per Sl.No. 71E of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 115 | Revolving Centre - as per Sl.No. 72 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 116 | Heavy Duty-Revolving Centre - as per Sl.No. 73 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 117 | Heavy Duty-Revolving Centre - as per Sl.No. 74 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 118 | Revolving Centre - as per Sl.No. 75 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 119 | Drill Sleeves - as per Sl.No. 76 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 120 | Drill Sleeves - as per Sl.No. 77 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 121 | Drill Sleeves- as per Sl.No. 78 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 122 | Drill Sleeves - as per Sl.No. 79 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 123 | Drill Sleeves - as per Sl.No. 80 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 124 | Drill Sleeves - as per Sl.No. 81 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 125 | Drill Sleeves - as per Sl.No. 82 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 126 | Drill Sleeves- as per Sl.No. 83 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 127 | Drill Sleeves - as per Sl.No. 84 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 128 | 4Jaw Independent Chuck - as per Sl.No. 85 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 129 | Back Plate with Clamp - as per Sl.No. 85A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 130 | 4JawIndependent Chuck - as per Sl.No. 86 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 131 | BackPlate - as per Sl.No. 86A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 132 | Cam Lock Nuts - as per Sl.No. 86B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 133 | Precision Chuck - as per Sl.No. 87 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 134 | 3Jaw self-centering Precision Chuck- as per Sl.No. 88 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 135 | Back Plate with Clamp - as per Sl.No. 88A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 136 | 3 Jaw self-centering with chips - as per Sl.No. 89 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 137 | Back Plate - as per Sl.No. 89A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 138 | Quick Change Tool Post - as per Sl.No. 90 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 139 | Extra Tool Holders - as per Sl.No. 90A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 140 | C40 Collet Chuck - as per Sl.No. 91 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 141 | Collet for the above Chuck - as per Sl.No. 91A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 142 | Keyless Drill Chuck - as per Sl.No. 92 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 143 | Drill Chuck Shank - as per Sl.No. 93 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 144 | Drill Chuck Shank- as per Sl.No. 94 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 145 | Drill Chuck Shank - as per Sl.No. 95 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 146 | Precision V Block - as per Sl.No. 96 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 147 | Precision V Block - as per Sl.No. 97 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 148 | Precision V Block- as per Sl.No. 98 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 149 | Universal Magnetic Indicator Holder- as per Sl.No. 99 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 150 | Universal Magnetic Indicator Holder- as per Sl.No. 100 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 151 | Twist Drill Grinding Gauge - as per Sl.No. 101 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 152 | Screw Cutting Gauge - as per Sl.No. 102 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 153 | Drilling Machine Tapping Attachment - as per Sl.No. 103 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 154 | Drilling Machine Tapping Attachment - as per Sl.No. 104 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 155 | Collets for the above Tapping- as per Sl.No. 104A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 156 | Self-Opening Die Head - as per Sl.No. 105 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 157 | Chaser-1 Set - as per Sl.No. 105A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 158 | Chaser-1 Set - as per Sl.No. 105B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 159 | Chaser-1 Set - as per Sl.No. 105C of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 160 | Quick Change Tool Post - as per Sl.No. 106 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 161 | Drill Bit Grinder - as per Sl.No. 107 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 162 | Grinding Wheel - as per Sl.No. 107A of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 163 | ER20Collets - as per Sl.No. 107B of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 164 | Rubber Hammer - as per Sl.No. 108 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 165 | Keyless Dril Chuck- as per Sl.No. 109 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 166 | Boring Bar- as per Sl.No. 110 of technical specifcation | As per Technical specification indicated at Annexure-1 |
| 167 | Boring Bar- as per Sl.No. 111 of technical specifcation | As per Technical specification indicated at Annexure-1 |
