|
| 1 | Supply, Installation, Testing & Commissioning of 5 mtr height Decorative pole made of galavnised mild steel pipe duly polyurethane (PU) paint coated with 1 mtr. long double arm designer bracket is made of round tube conforming to IS 1161. The pole(OD of 114.3mm and thickness-3.6mm) with bracket is given pre-treatment and finished with PU paint giving it a pleasing appearance and antique finish. Pole shall be available to hot dip galvanize the tube before painting. Foundation bolt size shall be 20x600x4nos. with Base plate size 300x300x12mm. A door is provided with Electrical accessories (connector, bakelite sheetand 6 Amp single pole MCB, cable looping termional for 4x4/6sqmm copper cable). Aluminium casting in golden ring form at bottom, middle, top of the pole. The pole will be supplied with brackets and luminaire combinations to suit the requirement. Branding name shall be embossed at the bottom near Junction/MCB box. Sticker not allowed in the form of company branding. Pole shall be supplied with outdoor post top luminaire of 45 Watt IP67 mounted in suspension type having an approximate size of 460mm outer diameter and 635mm height, housing - aluminium with designer steel aesthetic crown, optical grade opal injection moulded/clear polycarbonate diffuser and graphite grey UV resistant colour,constant current electronic, driver provided with high voltage ,open & short circuit protection and ambient temperature -10C to +40C. Supply 150V- 240V power factor 0.95 ,THD ≤ 20% internal surge protection of 4KV with following specification of light Engine for 45W : 4500Lumens, CCT 3000K ±500 CCT ,CRI 70 and lumen maintenance of L70 at 50000 hours IP 65 connectors,Accessories etc Complete with all repects. Design of pole should be such that it should maintains proper illumination on both side.(Analysis Attached) |
| 2 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3 x 1.5 Sqmm. |
| 3 | Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx6 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs) |
| 4 | Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx10 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs) |
| 5 | Supply, Installation, Testing & Commissioning 4Cx16 sqmm 1.1KV, Soild Aluminium conductor,XLPE insulated, PVC Sheathed, armoured extruted PVC type grade as per IS 7098 (part I)1998 with upto date. |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm) |
| 7 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required |
| 8 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with Gl thimble etc. as required. |
| 9 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32mm |
| 10 | Supply & Fixing of 38mm dia medium class HDPE conduit anlog with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 11 | Supply, Installation, Testing & Commissioning of 1 phase 2 wire, 415V, 1nos of 100 Amps incoming SP MCCBs fitted with outgoing 04 No 32 Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 2P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accessories 4 way Distribution Service Pillar. Galvanised angle frame and legs (40mm x 40 mm x 3mm) for Distribution Feeder Pillar with leg height 1m with 0.3m in soil approx [email protected] per mtr. Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.Cement grouting for support angle legs .Complete Job |
| 12 | Supply, Installation, Testing & Commissioning of distribution transformer 16KVA with two pole structure inclusive LT panel of suitable capacity with incomer and required outgoing, trivector three phase energy meter other required allied works to complete the job. including 11/0.433-0.250KV; 50Hz), Aluminium Wound Distribution Transformer of latest Energy Efficiency (New), IS1180 Part-1; 2014 as per latest upto date amendment.Level-2,Gapless Surge Arrestor, 9 kV,10 kA, LA with polymer housing, Stn. Type,11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type,11 kV Horn Gap Fuse Set 3 Phase 200A25 mm² Single-Core Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type,9 Mtr. Long Pole(ST-410 SP33),11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm, GI Channel/Angle/Flat of sizes including clamps,Galvanized Nuts and Bolts, 32/63 amps TPN Switch Disconnector Fuse Unit,Cement bottoming 1:2:4 mix as per REC standards.5cum /pole, Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover and LT Distribution Box for 16/25 kVA DTR with MCCB for incomer & SFU\"s for Outgoing Circuits |
| 13 | Supply, Installation, Testing & Commissioning of 50sqmm AB (LT) Cable (3x50 +1x16 +1x35 sqmm) XLPE (1.1kV, 3+1 C, Al ) |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore (Medium) |
| 15 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 65 mm and 80 mm dia. G.I. pipes Please Enable Macros to View BoQ information |
