Construction Of Fourth Floor , Play Ground , Internal Furniture , East Side Compound Wall , Internal Road , Gutter, Pathway For Parking For District Krida Sankul Building At Barmati Taluka Baramati District Pune, Baramati-Maharashtra
TDR : 53173799
Tender Notice
BOQ
6 Days Left
Baramati
Maharashtra
Construction Of Fourth Floor , Play Ground , Internal Furniture , East Side Compound Wall , Internal Road , Gutter, Pathway For Parking For District Krida Sankul Building At Barmati Taluka Baramati District Pune
Name of Work:- जिल्हा क्रिडा संकुल बारामती इमारतीसाठी चौथ्या मजल्याचे बांधकाम, खेळाचे मैदान, अंतर्गत फर्निचर, पुर्वे दिशेकडील संरक्षक भिंत, अंतर्गत रस्ते, पावसाळी गटर, पार्किंग, पाथवे बांधणे ता. बारामती जि पुणेconstruction Of Fourth Floor , Play Ground , Internal Furniture , East Side Compound Wall , Internal Road , Gutter, Pathway For Parking For District Krida Sankul Building At Barmati Taluka Baramati District Pune.
Sl. No.
Item Description
1
SELF LEVELLING Supplying & Installation of Floor Levelerpolymer modified cementitious floor levelling compound. with following characteristics ▪ Self-smoothing ▪ Smooth finish ▪ Polymer modified▪ Fast application because of the good flow and cohesion of the fresh product ▪ Easy to place by pump or manually ▪ Low tension / stress on substrate▪ Good bond and compaction ▪ Fast hardening and quick drying ▪ Good surface hardness▪ Layer thickness: 2–15 mm ▪ Low odour Chemical base Portland cement, selected aggregates and polymers Fresh mortar density 2.05 ± 0.05 kg/L Tensile adhesion strength ≥ 1 N/mm2 (primed substrate, concrete failure, 28 days) Applied with Floor Leveler Primer Floor Leveler Primer which is a 1-part, water-based, synthetic resin concentrate ,diluted with water and used to prime cementitious and various other porous substrates. It is applied before using cementitious levelling compounds Density Not Less than 1.02 kg/L (+27 °C) The concrete substrate must be sound and of sufficientcompressive strength (minimum 20 N/mm2)with a minimum pull off strength of 1.5 N/mm2.
2
MICRO-CONCRETE SUB-BASE Supply & Installation of Microcrete-4 which is factory designed pourable, shrinkage compensated, high performance microconcrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement. with characteristics ▪ No vibration needed ▪ Easily pumpable ▪ Easy to mix and apply ▪ Excellent flow characteristics ▪ Rapid strength development ▪ High ultimate strengths ▪ Impact resistant ▪ Non-corrosive ▪ Non-toxic ▪ Iron and chloride free ▪ Dense and non-shrink concrete created by dual stage expansion ▪ Good bonding with existing concrete Adjustable consistency by controlling the water within the recommended limit TECHNICAL INFORMATION Curing time Compressive strength 1 day ≥ 25 N/mm2 3 days ≥ 35 N/mm2 7 days ≥ 45 N/mm2 28 days ≥ 65 N/mm2 Splitting tensile strength ≥ 3.5 N/mm2 (water : powder = 0.15, 28 days, +30 °C) (ASTM C496) Expansion Up to 4 % (ASTM C1090)
3
Maple Floor Wooden Flooring System Supply and Installation of Action Maple wood sports flooring as per specifications and conditions mentioned below. Technical Specification: Hard maple flooring: MFMA approved Hard Maple wood Flooring 20mm thick each individual strip of Hard Maple shall include the engraving of the MFMA Maple Flooring Manufacturers Association and manufacturing mill certification number. Minimum width of Hard Maple boards is 57mm and of random length varying from 230mm to 1800mm jointed together with the help of tongue and groove on all four sides of all boards. Substructure: Substructure of maple wood flooring shall consist of sleeper of Spruce or Pine having 63mm wide and cross section of 38 mm and laid perpendicular to the main flooring planks at a spacing 305mm centre to centre including 19 mm thick rubber shock pads at 305mm centre to centre spacing and polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Vapour Barrier: .20mm polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Gym Finish: Machine sanding two coats of oil modified Poly Urethane Gym sealer and one coat of oil modified Poly Urethane Gym sports finish in accordance with manufacturer specification and Game line marking in accordance with manufacturers specifications and project drawings etc. complete to the entire satisfaction of Engineer-in-charge. Federation Approvals: FIBA (Federation International Basketball Association). BWF (Badminton World Federation). IHF (International Handball Federation)
4
Supply and Installation of Aluminium Profile For Sports Flooring — Supply of 2.6 mm thick Aluminium Profile for the periphery of sports flooring. The profile width is 126 mm, and each length is 6 feet. The profile shall be provided with countersunk holes for screw fixing and anodised finish for enhanced durability and corrosion resistance. TECHNICAL SPECIFICATION – Parameter SpecificationMaterial High-grade Aluminium Alloy (6063-T6 or equivalent) Thickness 2.6 mm (±0.1 mm) Width 126 mm Length 6 feet (1828 mm) per piece Surface Finish Anodised (minimum 15 microns) for enhanced corrosion and wear resistance Profile Design Flat/curved edge as per perimeter layout, with smooth finish and clean edges Fixing System Pre-drilled countersunk holes at regular intervals for secure mechanical fixing Installation Location Periphery of Sports Flooring (to protect floor edges and provide clean finish) Color/Finish Natural Silver / Matt Anodised or as per project requirementStandards Conforming to IS 733 / IS 1285 for Aluminium ExtrusionsApplication For use in Indoor Sports Flooring Systems (Maple, Synthetic, PU, Vinyl, etc.)Features Durable, rustproof, easy to install, provides aesthetic edge finish and protection from damage
5
LAWN TENNIS ACRYLIC SURFACE (9 LAYERS) Acrylic Resurfacer SF 101 – Technical Specification Type: 100% Acrylic Latex Resurfacer Base: Aqueous acrylic copolymer Viscosity (25°C): >500 cps pH: 8.0 – 8.5 Specific Gravity: 1.02 Coverage: 0.3–0.5 kg/m² (undiluted) Recommended Mix: Acrylic Resurfacer – 120 kg Silica Sand (60–80 mesh) – 140–160 kg Water – 40–60 kg Application: Rubber squeegee on asphalt or concrete Rubber layer Type: Acrylic-based, wet-pour cushion rubber flooring. Purpose: Designed for recreational and professional sports surfaces. Granulometry: SBR 0.5–1 mm. Applications: Suitable for asphalt and waterproofed cement subfloors. High Flexibility: Acrylic formulation ensures elasticity and impact resistance. Versatile Use: Works on asphalt or waterproofed cement without humidity issues. Certified System: Recommended topcoat is ITF-certified Carbolink Acrylic Color Coating Technical Specifications : Density 0.85–0.95 kg/L , Viscosity 20,000–30,000 mPa•s RC 106 (Medium): 2–5 layers, diluted with 25% water. RC 107 (Fine): 2 layers, diluted with 25% water. Fine rubber : Type: Acrylic-based wet-pour fine cushion layer for recreational and sports surfaces Application: Tennis, basketball, handball, football, and volleyball courts. Single-component, acrylic-based, heavy-duty color coat Acrylic Color Kote T-50 Type: Single-component, acrylic-based, heavy-duty color coat High-performance acrylic latex coating fortified with fillers for durability. Dual-purpose use: Suitable for both texture and top coat layers. Customizable: Allows adjustment of surface texture and speed of play (by varying Sand size and quantity). High flexibility: Can be used for both recreational and sports surface applications. Curing Conditions 70 °F (21 °C) & 50% RH Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
