|
| 1 | Supply and fixing of 12.5 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 3mm, top minimum100mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3. & having no circumferential weld, with accessories for high mast such as head frame suitable for luminaries & its control gear boxes, 0.75 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , double drum winch Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers , anchor plates etc Complete in all respect. as per direction and satisfaction to the Engineer-in-charge SI No. 651 |
| 2 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand allaround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitablesize or as directed by the Engineer-Incharge, complete in all respect.The armouring of the cable shall be properly connected with theearth conductor by clamps etc (25 sq. mm 3-1/2 core ) S.I. No. 501-j |
| 3 | Supply and fixing of single unit neon aviation obstruction light (GEC-ZH750)/ Bajaj BJAOL-1 complete with transformer and neon spiral etc. at the top of the building complete in all respect S.I. No.- 409 |
| 4 | Supply and fixingof brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. (25 sq. mm 3-1/2 core) S.I. No. 503-j |
| 5 | Supply and fixingof plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulatingwith tape and making connection etc. complete in all respect as per direction of the Engineer- Incharge. (25 sq. mm) S.I. No. 504-e |
| 6 | Supply and wiring of 4 number 25 sq. mm. PVC insulated 1100V grade single core copper conductor cable in 50 mm dia PVC conduit partly concealed in wall and partly laid in slab along with reinforcement before concreting with two number 16sq mm single core copper conductor cable as earth continuity wire drawn in coudit including matching colour wash etc, complete in all respect. S.I. No. 280-c |
| 7 | Supply and burying of safe Earthing Electrode T-39 (HOT-dip Galvanized ) Length up 300 mm outer dia pipe 76 mm inner dia 38 mm internal dia 12 mm outer GI pipe of 15 SWG and inner of 12SWG with hot dip galvanization upto 100 micron filling with crystalline conductive mixture (CCM) having anti corrosive soil with 50 Kg activated soil ........ complete. S.I. No. 725 D |
| 8 | S/F of PVC 20 mm dia flexible pipe ……………. Complete. |
| 9 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect S.I. No. 1455 |
| 10 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolatings witch metering instrumen t& instrument box with CTs etc. in case of TPN, complete in all respect. (25 A TPN) S.I. No. 807-e |
| 11 | S/F of 60×45 cm radium sign Board and Photography Please Enable Macros to View BoQ information |
