|
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out. |
| 2 | Excavating in trenches not exceeding 1.5m wide and exceeding 1.5 m but not exceeding 3.00m in depth for foundation of pole, laying of cables etc in hard/dense soil and getting out complete all as specified and directed. |
| 3 | Returning, fillingin, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed. |
| 4 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | Material & labour for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note : Depth after punning shall be measured and paid. |
| 6 | Material & labour for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundtion of PCC poles/struts all as specified and directed. |
| 7 | Material & labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work, all as specified and directed. |
| 8 | Material & labour for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed. |
| 9 | Supply and laying Supplying and laying reinforced precast concrete cable coverClass LV, Type I, flat, size 250mm x 150mm x 40mm, laid as cable protection coverincl taking down old unsv bricks complete all as specified and directed. |
| 10 | Dismantling old unserviceable PCC/Steel poles/struts, any size complete all as specified and directed. |
| 11 | Material & labour for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31 (09 Mtr long) including two coats of bituminous paint internally and externally for the portion embedded in concrete and two coats of aluminium paint over one coat of red oxide primer to external/exposed surfaces complete all as specified and directed . Note:- Excavation/PCC will be measured and paid separately under relevant items |
| 12 | Supplying & laying, XLPE insulated PVC inner sheathed, 10 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete including taking down old unserviceable cable complete all as specified and directed. |
| 13 | All as per item No 12 above but cable of size 16 sqmm 4 core . |
| 14 | All as per item No 12 above but cable of size 35 sqmm 3.5 core |
| 15 | Supply & fixing in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along thepoles / walls with necessary clamping, etc complete all as per specified and directed. |
| 16 | All as per item No 15 above but size 50 mm bore |
| 17 | All as per item No 15 above but size 80 mm bore |
| 18 | Re-stringing of existing LT aluminium conductor steel reinforced (ACSR) on over head line of any size on RCC / steel tubular pole by removing of binding wire from insulator and rebinding with aluminium binding wire including fixing of jumpers where necessary complete all as per specified and directed. Note: - Each conductor will be measured separately as one RM for payment. |
| 19 | Dismantling cross-arms of M.S channel or angle sections etc. complete all as specified and directed. |
| 20 | Suplying, fabricating & fixingstructural mild steelchannel, angle, iron, flat iron and brackets etc for fabrications of cross arms, bracings, supports, D-clamps, stiffeners,eye hooks, bolts,pole clamps and back platesincluding nuts, bolts and washers, welding banding cold , or hot drilling holes for insulators bolts in any shape or sizeas indicated or directed and inclusive of one red oxide primer coat, one under coat and one finishing coat of aluminium paint complete. |
| 21 | Supply & fixing in repair, PVC junction box, factory made, size 180x210x110mm with one No SP MCB of 06 to 20Amp rating with necessary clamps and bolts etc including connecting with street light cable incl taking down old unserviceable one complete all as specified and directed. |
| 22 | Supply & fixing in repair, PVC insulated and PVC sheathed copper conductor cable of size 2.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing throuth pipe, on pole/wall from juntion box to street light fitting complete all as specified and directed. |
| 23 | Supply & fixing heavy duty, non metalic, PVC conduit of 20 mm bore including all fitting such as bends, elbow, coupler lock nut etc, fixed on pole with clamp including taking down old PVC conduit of any type complete all as specified and directed. |
| 24 | Dismantling insulators any type any size complete from existing position. |
| 25 | Material & labour in repair, Pin type porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volt grade including taking down unservicebale insulator complete all as specified and directed. |
| 26 | Material & labour in repair,shackle type insulator, porcelain vitreous, white, brown or green, 75 mm height, 90 mm dia for working pressure 1100 volt grade including galvanized mild steel straps, 31 x 3 mm washers, insulator GI bolts of 12 mm diaincluding taking down unservicebale insulator complete all as specified and directed. |
| 27 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 20126.00 /- ] |
