|
| 1 | Demolition of cement concrete (un reinforced) in ground floors not exceeding 15 cm below or above ground level complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 4 | M & L for rendering 15mm thick plaster owith mixing liquid water proofing compound as per manufacturer\"s instruction by weight of cement, finished in cement mortar 1:4 finished even and smooth without using extra cement for external wall/roof facia/roof projection/chajja complete all as specified and directed. |
| 5 | M&L for Rendering 10 mm thick plaster on otherthan fairfaces on brick wall or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | M&L for Complete removal of existing treatment and applying two coats of Distemper oil emulsion, white or tinted over one coat of primer over one coat of wall putty as preparatory to distemper on surfaces of internal wall complete all as specified and as directed. |
| 7 | PCC 1:3:6 type C-2 (40mm graded aggregate) 75 mm thick as in plinth protection, finished fair and even without using extra cement complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surfaces and applying Two coats of oil bound distemper on new plastered surfaces including two coats of wall putty over one coat of primer complete all as specified and as directed. |
| 9 | M&L for One coat of white wash (interior Primer) on old ceiling surfaces including preparation of surfaces complete all as specified and as directed. |
| 10 | M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) nominal mix as in floors and pavings of 75 thick finished even & fair all as specified and as directed |
| 11 | M&L 25 mm thickPCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) nominal mix as in sub base of flooringfinished even and fair complete all as specified & directed. |
| 12 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed. |
| 13 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed. |
| 14 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed. |
| 15 | M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tileexceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 16 | -ditto- all as per item No 15 but on vertical surfaces |
| 17 | M&L for coloured glazed ceramic tilesin vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 18 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 19 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 20 | M&L for Granite (of any type) work (table rubbed and polished) in cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dustwith admixture of pigment to match with the shade of granite, 25 mm thick complete all as specified and as directed. |
| 21 | Rounding to edges of granite slabs one edge, such as cooking platform, and other similar situations complete all as specified and as directed. |
| 22 | Taking down chowkhats or frames n exc 1.5 Sqm each with shutters (with out taking of shutters from the frames) complete all as specified and as directed. |
| 23 | Taking down chowkhats or frames exc 1.50 sqm but not exc 4 sqm each with shutters (with out taking of shutters from the frames) complete all as specified and as directed. |
| 24 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each complete all as specified and as directed. |
| 25 | Refixing of shuttersof any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s)after resecuring or easing & adjusting, including taking down shutter from chowkat or framecomplete all as specified and directed. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified. Note:For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be admissible. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specifiedNote:For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimnensions on plus side shall be acceptable but no extra payment on this account shall be admissible. |
| 28 | S & F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 29 | M&L for IInd class hard wood glazed and skeleton shutters 30mm thick open rebated and prepared to recieve glass, guaze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I Section 8 cla-use 8.20(a) supplied and fitted to chowkats complete all as specified and as directed. |
| 30 | S&F Factory Made Solid PVC Moulded Door with particle board core Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 31 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos)and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified. |
| 32 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos)and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified. |
| 33 | S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified complete all as specified and as directed. |
| 34 | S & F Butt hinges, mild steel cold rolled of 100 mm size complete all as specified and as directed. |
| 35 | S&F Aluminum anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 36 | S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bols of extruded sections or cast aluminium alloy 300 mm long complete all as specified and as directed. |
| 37 | S&F Aluminum handles cast type, anolised 125mm complete all as specified and as directed. |
| 38 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed |
| 39 | Supply and fix foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm including taking down defective foot operated door stopper all as specified and as directed. |
| 40 | M&L for Two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed. |
| 41 | M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 42 | M&L for Sheet glass,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane 3mm thick complete all as specified and directed |
| 43 | M&L for Figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane thickness in 3 mm all as specified and directed. |
| 44 | M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 45 | S&FMild steel Mortice lock double handle, vertical type, 06 levers for door complete all as specified and as directed. |
| 46 | S&F in repairs foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm all as specified and as directed. |
| 47 | S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and as directed. |
| 48 | S&F in repairs extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed. |
| 49 | S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long complete all as specified and as directed. |
| 50 | S&F in repair galvanized mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed. |
| 51 | S&F in repair of rubber beading 40mm stripin bottom of door complete all as specified and directed. |
| 52 | S&Fin repair Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed by Engr in charge. |
| 53 | S&F in repair Harrison rails (Heavy duty) mild steel chromium plated (Curtain Hanging Rods) 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed. |
| 54 | S&F in repairs Mirror of selected Quality glass 600 x 450mm, bevelled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fix in repairs ofPVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, flush pipe & brackets complete set complete all as specified and directed. |
| 56 | S&F in repairs vitreous China WC pan pedestal pattern white (excludingflushing cistern and flush pipe) but incl connecting to trap making good to floor complete all as spd and directed. |
| 57 | S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected. |
| 58 | S & F in repairVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. |
| 59 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. |
| 60 | S&F in repairs Chromium Plated Soap dish, any type, fixed to plugs with chromium plated brass screws of size 150x150x90mm complete all as specified and as directed |
| 61 | S&F in repair CP health faucet with 1.25 Mtr long flexible tube incl wall hook complete all as specified and directed. |
| 62 | S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 63 | S&F in repair pillar tap 15mm dia long body,chromium plated, fancy type as in repair complete all as specified & directed. |
| 64 | S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 65 | S & F in repair chromium plated fancy type angle stop cock with long shank and cup (concealed type) 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 66 | S&F in repairbrass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type all as complete all as specified and as directed. Make- Hindware/Parryware/Cera |
| 67 | S&F in repair CP Towel ring 200mm dia superior quality fixed as in repair all as approved complete all as specified and as directed. Make- Hindware/Parryware/Cera |
| 68 | S&F in repairs grating doom 125 mm dia with or without waste hole of stainless steel complete all as specified and directed by Engineer-in-Charge |
| 69 | S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed. |
| 70 | S&F in repairs PVC connections 15mm size of PTMT nuts of length600mm long. complete all as specified and directed. |
| 71 | S&F in repair 25 mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 25mm-455gms) complete all as specified and as directed. |
| 72 | S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down old tank complete,all as specified and directed. Make: Sintex/Dhara/Rotex |
| 73 | S&F in repair tank cover black (with arrangement for locking) of water storage tank complete all as specified & directed. |
| 74 | S&F in repair 1.00 mm thick stainless steel plate rack ofover all size 600x900x300 mm of standard pattern complete all as specified and directed. Make : Prayag/Blue Star |
| 75 | S&F in repairCP Showerrose of 125mm square with arms 150mm long fixed 15mm dia complete all as specified and as directed |
| 76 | Supply and fix in repairs 100 mm dia CIfloor trap/nahani trap including taking down existing damaged CI grating from floor trap/nahani trap |
| 77 | Taking down 15mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and as directed. |
| 78 | Taking down 20mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and as directed. |
| 79 | Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubingmaking good, cutting exc 10cm but n.exc 20cm girth in brick walls all as specified. |
| 80 | Supply and fix Unplasticized PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm fixed complete to walls, ceilings in floors etc any type all as specified and as directed |
| 81 | Supply and fix Unplasticized PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm fixed complete to walls, ceilings in floors etc any type all as specified and as directed |
| 82 | M&L in repair PVC (SWR) gully trap, 110mm dia plain with gratingincl jointing with solvent cement cement etc all as specified and directed. |
| 83 | S&F in repair 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 84 | Taking down eaves gutters and rain water pipes of any size/ pattern with all the fittings. |
| 85 | S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ walls (110 mm bore) |
| 86 | S&F 110 PVC (SWR), junction single, (Single T) equal or unequal |
| 87 | S&F, 110 mm bore PVC (SWR) bends and fixed in position with adhesive |
| 88 | S&F, Cast iron pipes of 80mm Bore with flanged ends, centrifugally cast, Class A, in any length laid in floors/ walls complete all as specified. |
| 89 | S&F, Cast iron pipes of 100mm Bore with flanged ends, centrifugally cast, Class A, in any length laid in floors/ walls complete all as specified. |
| 90 | M&L Bends, Tapers, Tee pieces upto 150mm dia (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged complete all as specified and as directed |
| 91 | Taking down carefully point wiring from existing place ie light, fan socket or power points complete with all fittings such as switches, sockets, ceiling rose pendants, holders etc and making good to disturbed surface of wall, floor etc to match with existing surface complete all as specified and directed. |
| 92 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- |
| 93 | (a)One light, ceiling fan, Exhaust fan or Bell point controlled by one switch. |
| 94 | (b)One light point controlled by two- two way switches. |
| 95 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 2.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 2.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following. Note :- for item No. 92 & 93(a)ForLights points one circuit maximum 08 points.(b) For same board 6 Amps socket not more than 2 x 6 Amp sockets in one circuit for light point.(c)For Socket outlet6 Amps ( One circuit with maximum 4 points).(d)For Socket outlet 16 Amps ( One circuit of one point only) |
| 96 | (a)One5 Amps socket outlet on same board. |
| 97 | (b)One 5 Amps socket outlet on independent board. |
| 98 | (c)One 15 Amps socket outlet on independent board. |
| 99 | M&L for Modular switch flush type single pole one way 6 Amps 240 volts, 1 Module complete all as specified and directed. |
| 100 | M&L for Modular switch flush type single pole Two way 6 Amps 240 volts, 1 Modulecomplete all as specified and directed. |
| 101 | M&L for Modular socket 6 /16 Amps-2/3pin combined two modulecomplete all as specified and directed. |
| 102 | M&L for Modular socket 6Amps-2/3pin combined two modulecomplete all as specified and directed. |
| 103 | M&L for Modular switch 1 way 16 Amps 1 modulecomplete all as specified and directed. |
| 104 | M&L for ceiling rose surface Bakelite two to three terminal. 65x50 mm complete all as specified and directed. |
| 105 | M&L for angular type lamp holder insulated body with back plate for batten fitting complete omplete all as specified and directed. |
| 106 | M&L for bell push flush type 5 Amps single pole 230 Volt white ivory finish complete all as specified and directed. |
| 107 | Supply and fixing Bell Ding Dong, AC 230 V single pole complete all as specified and directed. |
| 108 | Supply and Fixing Modular fan step regulator single phase 230 volt, 120 watt -2 Module complete all as specified and directed. |
| 109 | Supply and fixing wall/surface mounted type LED light fitting complete with LED lamp of 1x 20/22 watt (4 ft), extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductorcablesuitable size.etc complete all as specified and directed. |
| 110 | Supply and fixing LED Light fitting mirror type with high out put diffuser 2 feet ,10watt ,220 v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed. |
| 111 | Supply and fixing LED Light fitting 1x9/10 watt bulkhead lumonoare including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed. |
| 112 | Dismaintling & Taking out MCB DBs and MCBs any size , any type and capacity |
| 113 | Supply and fixing of sheet metal enclosure for DBs 12 way double door 230 volt single pole and neutral supply complete fixed properly on MS strips and to connect their incoming/outgoing electric connections by means of suitable size of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB\"s of cables/wires complete all as specified and directed. |
| 114 | Supply & Fixing MCB SP, 6 to 32 Amps (\"B\" series) having current rating 10 KA completeall as specified and directed. |
| 115 | Supply & fixing MCB SPN, 32 Amps(\"C\" series) having current rating 10 KA complete all as specified and directed. |
| 116 | M&L for sub main wiring in repair using two single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor FRLSof size 6 Sqmm as earth continuity conductor all as specified and directed.NOTE :(i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
| 117 | M&L for sub main wiring in repair using two single core FRLSPVC insulated, unsheathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor FRLS of size 4 Sqmm as earth continuity conductor all as specified and directed.NOTE :(i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
| 118 | M&L for earthing in repairwith galvanized steel earth plate electrode o size 600x600x6mm buried directly in ground (earth pit not less 2.25 mtr deep below ground level) with top edge of plate should not less than 1.50 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4mm dia by means of bolts, nuts, washers of galanized iron or steel etc. with earth protected by 15mm bore light grade GT protected pipe and including necessary excavation earth work concrete4 pie PCC 1:3:6 type B-cover of suitable size watering arrangement with funnel wire mesh 20 mm dia GI light grade watering pipe, filling with common salt and charcoal etc complete all as shown in electrical plate No 3 of MES Schedule Part-I including testing complete all as specified and directed. |
| 119 | Supply and fixing Street light fittings LED 35W 230 volt AC outdorr type with high pressuredie cast aluminium hosing and heat resistance complete with driver ,lamp bracket with impact IP66 luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers all directed |
| 120 | Supply and fixing exhaust fan steel body AC single phase ,230 volt of size 300 mm sweep with ,blades and frame and louvers complete as directed. |
| 121 | Taking down Electric Meter any make and any size and deposit in safe custody with MES store yard and re-fixing after completion of work complete all as specified and directed. |
| 122 | Supplying and fixing new industrial type socket, 2 pole + earth 20 Amps, with and including plug top and MCB, 20 Amps, ‘C’ series, single pole in sheetmetal enclosure all as specified and directed |
| 123 | Taking down carefully from existing place ceiling fan and removing to MES store yard, Scraping,cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling and refixing at site making serviceable condition as required complete incl electric connection withthree core flxible wire 1.5 sqmm all as specified and directed by Engineer-in-Charge. |
| 124 | Taking down carefully from existing place forGeyser of capacity 25 Ltrsby disconnecting elect/water supply connection and refixing the same after civil work incl all elect /water connection connecting with suitable wire all as specified and directed by Engineer-in-Charge. |
| 125 | Supply and fix LED Bulb 9 wattcomplete all as specified and as directed.. Make-Bajaj/Havells/Phiips/orient/Crompton |
| 126 | Supply , laying , connecting and testing LT 1100 volt grade electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured (heavy duty) ISI marked with aluminium stranded conductor gross sectional area 35 Sqmm , 3.5 core laid in trenches / duct / pipe etc complete all as specified and directed . |
| 127 | Excavation in trenches in soft/loose soil not exceeding 1.5 m deep and not exceeding 1.5 mtr wide and getting out including forming bottom surface to required levels/gradients/slopes for laying of cable etc. all as specified and directe. |
| 128 | Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed |
| 129 | Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directedat a level not exceeding 1.5 mtr above starting point complete all as specified and directed |
| 130 | M & L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. |
| 131 | M&L bricks for coverunderground cable with one layer of bricks using sub class \"B\" bricks (Old size) laid flat across the cable complete all as specified. (Excavation and earth work will be measured separately). |
| 132 | Supplying & Fixing Tube medium grade galvanised of dia 50 sqmm for road crossing of cable and on pole and DB cable as in cable protection complete all as specified and directed. |
| 133 | M&L for disconnecting and removing existing unserviceable/damaged wooden/mild steel sheet enclosure of any description and in any position complete all as specified and directed. |
| 134 | Supply ,install, testing & commissioning of Indoor type, Wall mounted (with anchor bolts & nuts and PCC work as required) compartmentalized type Meter Cabinet of overall dimension 1800mm (L) x 800mm (W) x 200mm (D) made out of 2.0 mm thickCRCASheet with front door having cut out duly covered with transparent polycarbonate / glass panel for viewing KWh meter and other door shall be opaque. All doors should have gasket and locking arrangement to meet ingress protection level IP-43. The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) after necessary surface treatment. The cabinet shall be fabricated as per the drawing and comprising of following accessories :-a) Four pole MCCB, 125 Amps with breaking capacity 25 KA having fixed thermal and fixed magnetic release and spreader link at both incoming and outgoing side.- 01 No.b) Copper Bus Bar of size 25mm x 3mm duly mounted on FRP insulators and necessary drilling for 1 incoming & minimum 8 outgoing connections and duly covered with heat shrinkable PVC sleeves of standard colour code - 4 Nos.c) MCB SPN 40 Amps, 10 KA - 8 Nos ( To be connected with 8 Nos Meters)d) MCB SP 06 Amps, 10 KA -2 No ( For common lighting & spare)e)LED indicating Lamps, 22mm with 3 Amps SP MCB-03 Nos.f) 3 Way Bakelite strip type cable connector 30 Amps rating - 08 Nosg) Internal wiringwith 1100V grade FRLS PVC insulated multi flexible copper wire of sizes duly crimped with copper lugs of suitable size & type all as mentioned below :-i) MCCB to Bus Bar - 10.0 Sqmm copperii) Bus Bar to Cable Connector via KWh meter and MCB - 6.0 Sqmmiii) Bus Bar to LED Lamp via MCB - 1.5 Sqmm |
