|
| 1 | SCHEDULE \"A\" PART-I: B/R WORKS |
| 2 | Surface excavation of soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil |
| 3 | Excavating over areas in soft/loose soil nexc 1.50 m deep and getting out complete all as specified and as directed. |
| 4 | Returning, filling of soft/loose soil in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm. |
| 5 | Removing excavated soft/loose soil material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 6 | M&L forPCC (1:3:6) type C-2using 40mm graded machine crushed stone aggregate as in foundation. |
| 7 | M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 8 | M&L for brick work with flyash modular size bricks staright or curved on plan to any radius in half brick thick walls builtin CM 1:4 complete all as specified and as directed. |
| 9 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed |
| 10 | M&L hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete. |
| 11 | M&L for 150 mm thick cement concrete type B-2, 1:2:4 (40 mm graged aggregate) complete all as specified and as directed. |
| 12 | M&L for sand filling under floors or in foundations incl watering and consolidation complete al as specified and as directed. |
| 13 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment complete all as speicified and as directed |
| 14 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L preparation of new plastered surface and three coats of white wash complete all as specified and as directed |
| 16 | M&L for providing precast cement concrete type B1 1:1.5:3 (20 mm graded aggregate) in landings cover slabs, (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar CM 1:4 complete with joints to match complete all as specified and as directed. |
| 17 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding withand including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 18 | Demolition of concrete in ground floors and pavings nexc 15cm thickness(below or above ground level) complete all as specified and as direcetd. |
| 19 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed |
| 20 | M&L for 150 mm thick cement concrete type B-1, 1:2:4 (20 mm graged aggregate) complete all as specified and as directed. |
| 21 | M&L preparation of new plastered surface and applying three coats of white wash complete all as specified and as directed |
| 22 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 23 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 for laying floor finishes. |
| 24 | M&L for Glazed ceramic coloured tiles 350x250x7 mm/450x350x7 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or Coloured cement to match &including 10mm thickrenderingin CM (1:4)on fair faces of brickwork or concrete surfaces. |
| 25 | Demolition of stone slabs tiles of any description or thickness in floors apronslaid bedded and pointed in any morter etc |
| 26 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete incl 20 mm thick screed bed 1:6 CM in floors. |
| 27 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as specified and as directed. |
| 28 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar . |
| 29 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 30 | Supply and laying of16 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 on walls/ceilingor laying in floors complete all as specified. |
| 31 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 32 | Supply and laying of20 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floors complete all as specified. |
| 33 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 34 | Supply and laying of25 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floor complete all as specified. |
| 35 | S&F in rotational moulded polyethylene water storage tanks two layered (ISI Marked) 2000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified |
| 36 | S&F 20mm diaball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified. |
| 37 | S&F in 25mm repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 38 | S&F in 15mmrepairs mm bore dia stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle, screwed both ends for pipe or for unions and fixed complete all as specified and directed. |
| 39 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 40 | S&F in repair stop valve, cast alloy screwed down high pressure with crutch or butterfly handle . |
| 41 | S&F in repair 15 mm bore CP bib tap of fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule fixed complete all as specified and directed. |
| 42 | S&F in repair 15mm bore CP stop valve with wall flange fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of concealed type complete all as specified and as directed. |
| 43 | S&F in repair belved edge mirror of selected quality glass mounted on 6 mm thick AC bldgs boards or commercial ply wood and fixed to wooden plugs with chromium plated brass screwed and cup wahses complete all as specified and directed. |
| 44 | S&F in repair brass chromium plated towel towel rail 20 mm dia . |
| 45 | S&F in repair PVC connections 15 mm size with PTMT of 450mm long complete all as specified and as directed. |
| 46 | S&F 100mm dia grating doom of PTMT steel complete all as specified and as directed. |
| 47 | M&L in repair PVC (SWR) gully trap 125/110 mm setting & fixingof size 125/110 mm complete all as specified and directed. |
| 48 | Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 49 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 50 | S&F 110mm size PVC (SWR) bends any radiuscomplete all as specified and directed |
| 51 | S&F75 mm size PVC(SWR) bends any radius complete all as specified and directed |
| 52 | S&F 110mm size PVC (SWR) branch piece, single (single Y) equal or unequal with access door. |
| 53 | S & F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door. |
| 54 | S & F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door. |
| 55 | S&F 75mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed. |
| 56 | Taking down chowkat with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 57 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 58 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 59 | S & F 4.8 mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane for cup board, cabinet, racks etc complete all as specified and as directed. |
| 60 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of wood grain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 61 | S&F Factory made solid panel PVC moulded Door shutter with wood particle board, 28 to 30 mm thick (stiles) , with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face , suppyling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 62 | M&L for toughened glass 12 mm thick as in hinged door,window, partition automatic doors and similar work including cutting to shape, drilling holes required including all fittings. |
| 63 | S&F 100 mm size mild steel hinges medium weight complete all as specified and directed |
| 64 | S&F for 150 mm long mild steel barrel tower bolt of extruded section complete all as specified . |
| 65 | Complete removal of existing treatment on old oruntreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls. |
| 66 | M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate . |
| 67 | Dismantaling wrought iron or mild steel work of any description not otherwise provided for |
| 68 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 |
| 69 | M&L, applying two coat of synthetic enamel paint including preparation of old painted steel surface any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 70 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 71 | S&Fin repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware |
| 72 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 73 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make JaquarCat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag |
| 74 | S&Fin repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware |
| 75 | S&Fin repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware |
| 76 | S&F in repairs CP Hand shower 27x27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera |
| 77 | Demolition of reinforced cement concrete of any descripton and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 78 | M&L for Cement concrete M30 design mix as in Columns, pillars, piers, posts and struts and similar works complete all as specified and as directed. |
| 79 | M&L for formwork to sides of RCC columns ,Pillars ,Posts,Struts, foundations , Piers finished in rough surfaces finishned rough complete all as specified and as directed |
| 80 | M&L TMT bars 5 mm dia and over upto and incl 10mm, bent to shape required including cranking bending spirally for stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete. |
