|
| 1 | CHAIR DINING OFFRS / LONG BACK (MAP) FD/MAP-II/04 |
| 2 | M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made outof 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drgand as directed by the Engineer-in-Charge. |
| 3 | All as 1.01 abovefront leg. |
| 4 | All as 1.01 above side/front/back rail. |
| 5 | All as 1.01 above stiffner. |
| 6 | All as 1.01 above back strip. |
| 7 | S & F new hard PVC/rubber shoe/ring of superior qualityfixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge. |
| 8 | M&L for removal of old existing unsv seatwith 75 mm thick cushion duly stiched wirh best quality leatherite cover after fixing of 12mm thick plywood on the base of seat. Rest all as shown on drawing.(Make of cushion shall be Sleepwell/Kurl-on-Goldline) |
| 9 | M&L of polishing of Chair Dining Offrs as directed by Engr-In-Charge/GE. |
| 10 | Note for all items :1. Removal of following existing unserviceable steelcomponents of various MES pattern furniture items carefully without disturbing the adjoining parts and S&Fnew components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges placing everypart in-tact condition as per drgs. 2. Cleaning Derusting of Stain/Dirt with Sand Paper making the Surface smooth,filling the holes with Putty wherever required and Applying two coat of Synthetic enamelled paint(Colour of paint as per approved by Engr-In-Charge/GE) over a Red Oxide Primer for steel items direected by Engineer-in-Charge/GE3. Work will be executed where the furniture exist in different User Units of GE Sevoke Road including BSO\"s Furniture Yard as directed by Engineer-in-Charge/GE. |
| 11 | CHARPOY IP FOLDINGWITHM/N FD-388 (R) |
| 12 | Conversion of Newar to Plytop from CharpoyGI and S&F of new 12mmthick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed after Fixing of 2 x ISI Specified MS Iron Strip of 4 mm thickness x 50mm width duly welded at equal distance across the long rail for fixing of plywood. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply). |
| 13 | M&L for two coat of paint by means of spray painting machine with synthetic enamelled paint of appropriate shade as dedcided by Engr-In-Charge/GE and quality to Charpoy IP folding including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery 1 grinder machine as required as trade practice complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as directed. |
| 15 | S & F new hard PVC/rubber shoe/ring of superior qualityfixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge. |
| 16 | CHARPOY GI PIPE 32MM M/N FD-220 |
| 17 | Conversion of Newar to Plytop from CharpoyGI and S&F of new 12mmthick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed after Fixing of 3 x ISI Specified MS Iron Strip of 4 mm thickness x 50mm width duly welded at equal distance across the long rail for fixing of plywood. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)). |
| 18 | Removing old existing unsv long rails and S&F new long rail as per existing shape and size as per drg. |
| 19 | Conversion of long rails obtained from Ser No 3.02 above into short rails as per existing shape and size as per drg. |
| 20 | Conversion ofshort rails obtained from Ser No 3.03 above into legs as per existing shape and size as per drg. |
| 21 | Nut & bolts as per existing shape and size and as per drg. |
| 22 | Washers as per existing shape and size and as per drg. |
| 23 | GI elbow 3 way 32mm dia as per existing shape and size and as per drg. |
| 24 | TABLE 3\" x 3\" WOODEN FD-293 |
| 25 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 26 | All as 4.01 aboveleg made out of 1st class hard wood. |
| 27 | All as 4.02 aboverailout of 1st class hard wood. |
| 28 | All as 4.02 above bracket. |
| 29 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 30 | M&L of polshing of Table 3\" x 3\" wooden as directed by Engr-In-Charge/GE. |
| 31 | RACK SHOE STEELFD/E6/MAP/02(R) |
| 32 | M&L for removal of old existing unsv leg stand of 25mm round pipe ofin any position, S&F new leg stand made outof MS pipe of 18 guage of appropriate size. Rest all as shown on drgand as directed by the Engineer-in-Charge. |
| 33 | M&L for removal of old existing unsvJali Shelves ofin any position, S&F new Jali Shelvesof appropriate size. Rest all as shown on drgand as directed by the Engineer-in-Charge. |
| 34 | M&L for running electric welding to the broken/dislocated broken frame of Rack Shoe Steel revitting /spot welding complete all as directed. |
| 35 | M&L for two coat of painting of complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S & F new hard PVC/rubber shoe/ring of superior qualityfixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge. |
| 37 | TABLE DINING OrsFD-165(M) |
| 38 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 39 | All as 6.01 aboveleg made out of 25 mm square pipe of 18 guage. |
| 40 | All as 6.01 abovestiffner/side rail made out of 25 mm square pipe of 18 guage.. |
| 41 | M&L for running electric welding to the broken/dislocated broken frame of table dining ORsrevitting /spot welding complete all as directed. |
| 42 | M&L for two coat of painting of complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S & F new hard PVC/rubber shoe/ring of superior qualityfixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge. |
| 44 | TABLE 3\" x 3\" STEEL FD-1009 |
| 45 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 46 | M&L for running electric welding to the broken/dislocated broken frame of table3\" x 3\" Steel revitting /spot welding complete all as directed. |
| 47 | M&L for two coat of painting of complete all as specified and as directed by Engineer-in-Charge. |
| 48 | S & F in replacement 100cm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3\"X3\" steelcomplete all as directed by Engineer -in-Charge. |
| 49 | S & F new hard PVC/rubber shoe/ring of superior qualityfixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge. |
| 50 | DOUBLE BUNK CHARPOYFD-220 |
| 51 | Removing of old existing unserviceable plytop from Double Bunk Charpoy and 12 mm thick new plytop of suitable size for both beds (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply). |
| 52 | Welding to broken joints/fixing nut bolts of Double Bunk Charpoy as per directed. |
| 53 | S&F in replacement of hard rubber shoes at the bottom of leg all as shown.on drg. |
| 54 | M&L of two coat painting of Double Bunk Charpoy frame (Steel Part), Colour as per approved by GE/Engr-In-Charge with spray machine. |
| 55 | CHAIR SCHOOL WITH HAND BOARDFD/E6/MAP/05 |
| 56 | Removing old existing unsv seat chair and S & F new seat (Make : Nilkamal/Cello/Amko)as per shape and sizecomplete all as specified and directed. |
| 57 | Removing old existing unsv hand board of chair and S & F new hand board made out of 19MM thick prelaminated MDF board with steel frame as per shape and sizecomplete all as specified and directed. |
| 58 | Removing old existing unsv jali of chair and S & F new jali as per shape and sizecomplete all as specified and directed. |
| 59 | M&L of two coat painting ofchair school with hand board (Steel Part), Colour as per approved by GE/Engr-In-Charge with spray machine. |
| 60 | Taking out old unsv PVC Cap/Shoe and S&F new PVC Cap/Shoeas per Drg. |
| 61 | TEAPOY VARANDAHFD/E6/MAP/17 |
| 62 | M&L for removal of old existing unsv top of teapoy varandah in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 63 | Removing old existing unsv jali frame of chair and S & F new jali frame as per shape and sizecomplete all as specified and directed. |
| 64 | S & F in replacement of leg of 20 Sq mm MS tube having wall thickness of 1.6mm including welding tocomplete all as directed by Engineer -in-Charge. |
| 65 | Taking out old unsv PVC Cap/Shoe and S&F new PVC Cap/Shoeas per Drg. |
| 66 | SOFA SET 5 SEATED CUSHIONEDTP |
| 67 | M&L for removal of old existing tapestry cloth of sofa set 5 seated in any position and S&F new tapestry cloth (Not less than Rs. 600 per meter) and proper stiching with sofa in existing and as directed by Engr-In-Charge/GE. |
| 68 | CHAIR COMPUTER / CHAIR EXECUTIVE REVOLVINGFD/E6/MAP/01, TP |
| 69 | Replacement of old unsv seat and back of chair with new seat 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screws and covered with 40mm thick U foam over shape and best quality of tapestry cloth / leatherite. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engr-In-Charge. (Note :- The tapestry cloth to be provided as per sample in kept at GE office and as approved by GE.) |
| 70 | Replacement of unsv hydraulic system of chair revolving for the adjustment of height all as directed by Engr-In-Charge/GE. |
| 71 | Replacement of old unsv / broken wheel base complete of chair revolving all as directed by Engr-In-Charge/GE. |
| 72 | Removing old existing unsv twin coster wheel from chair and S&F new twin wheel costers as per shape and size complete all as specified and directed. |
| 73 | TABLE DINING 8 PERSON FD-273 |
| 74 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood) for Table dining 4 persons. |
| 75 | All as 13.01 above but S&F new leg made of 1st class hard wood |
| 76 | All as 13.02 above but long rail |
| 77 | All as 13.02 above but short rail |
| 78 | All as 13.02 above but support stiffner |
| 79 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge |
| 80 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. |
| 81 | ALMIRAH LARGE STEEL 1/2S x 1/2H FD/E6/MAP/18, FD-1033 |
| 82 | Removing old existing unsv handles fromAlmirah large steel and S&F new CP steel handle of size100mm to Almirah large steel andall as shown on drawingor as directed. |
| 83 | Removing old existing unsv lock from Almirah large steel and S&F newlock 75mm long, 06 lever with two keys to Almirah large steel all as shown on drawing or as directed. |
| 84 | Removing old existing unsvlockingassembly from Almirah large steel and S&F new lockingassembly to Almirah large steel including making adjustment ofdoor shutters & applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steelsurfaces complete. Painting shall be donewith spray machineand all as specified on drawing and as directed. |
| 85 | Removing old existing unsv leg from Almirah large steel and S&F new leg made out of 1mm thick CRCA Sheet made to sizeandshape and welding at bottom of almirah afterapplying one coat of synthetic enamel paintover a coat of red-oxide primerduly preparation of steelsurfaces complete. Painting shall be donewith spray machine and all as specified on drawing and as directed. |
| 86 | Removing old existing unsv butt hinges of Almirah large steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing and as directed. |
| 87 | M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as directed. |
| 88 | Removing old existing unsv locking device cover from Almirah large steeland S&F newlocking device cover made of 1mm thick CRCA sheet duly painted with two coat of paint over a coat of red oxide primer asapproved qualityto Almirah large steel. |
| 89 | Removing old existing unsv shelves from Almirah large steel and S&F new shelves as per existing drg and all as specified on drawing and as directed by Engr-In-Charge. |
| 90 | PAINTING :-M&L for two coat of paint by means of spray painting machine with synthetic enamelled paint of appropriate shade as dedcided by Engr-In-Charge/GE and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery 1 grinder machine as required as trade practice complete all as specified and as directed by Engineer-in-Charge to the following steel furniture items :- |
| 91 | Trestle Store Room steel FD-1043 |
| 92 | Rack 6 tier steel FD-1038 |
| 93 | Almirah large Steel 1/2H x 1/2S FD/E6/MAP/18,FD-1033 |
