|
| 1 | SCHEDULE ‘A’ PART-I (SCHEDULE OF ITEMS) |
| 2 | M&L for Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in conceled/ surface / recessed PVC conduit or Caping-N-Casingwith and includingmodular switch, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required all as specified and directed(Group C) |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 4 | Supplying and fixing of 5/6 amps modular switch |
| 5 | 15/16 Amp modular switch |
| 6 | 3/5 Pin 5/6 Amp modular socket out let |
| 7 | 6 Pin 15/16 Amp modular socket outlet. |
| 8 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 9 | Supplying and fixing fowlloing size/ modules GI box along with modules base & cover plate for modular swithes in recessetc as requied. (a) 1 or 2 module (75mmx75mm) |
| 10 | (b) 3 modules (100mmx75mm) |
| 11 | (c) 4 modules (125mmx75mm) |
| 12 | (d) 6 modules (200mmx75mm) |
| 13 | (e) 8 modules (125mmx125mm) |
| 14 | (e) 12 modules (200mmx150mm) |
| 15 | Supplying and fixing 3 pin 5amp ceiling rose on the existing junction box/ etc as requied . |
| 16 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 Amps Switch |
| 17 | 3 Pin 5/6 A Socket outlet |
| 18 | 6 Pin 15/16A Socket outlet |
| 19 | 15/16 A Switch |
| 20 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 21 | Earthing with GI earth plate 600mmx600mmx3mm thick including accessorise and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcal/ coke and salt as required. |
| 22 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 23 | Supplying and fixingPVCbatten / angle holder incl connection as reqd complete all as specified and directed |
| 24 | Supplying and fixing following way single pole and neutral, sheet steel MCB distribution board 240 valts on surface/recess complete, with tinned copper bus bar, neutral bus bar, earth bar, din bar,inter connection , powder pointed including earthing etc as requied (But with out MCB/RCCB/Isolater)(a) 8 way double door |
| 25 | As per Item No. 20 but 12 Way double door |
| 26 | S&F in replacement of MCB \"C\" Curve type, 10 kA, 5 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 27 | S&F in replacement of MCB \"C\" Curve type, 10 kA, 5 to 32 Amp, Single Poleand neutral with over load and short circuit protection complete all as directed. |
| 28 | Supplying and fixing 63A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 29 | Wiring for circuit/ submain wiring along earth wire with the 2x1.5 sq mm+1x1.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed.. |
| 30 | Wiring for circuit/ submain wiring along earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed.. |
| 31 | Wiring for circuit/ submain wiring along earth wire with the 2x6 sq mm+1x6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed. |
| 32 | Supply only LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories. |
| 33 | Supply only PVC ventilation fan 200 mm sweep complete all as directed by Engr-in-Charge. |
| 34 | Supply only wall light Floretine including Lamp base E27 with lamp complete all as specified and as directed by Enggr-in-Charge |
| 35 | Supply only Edgepro Surface Round of 18W, Elegantly designed sleek surface mounted pressure die-cast aluminium luminaire in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver(WW) |
| 36 | Supply only for Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver 18 watts (WW) |
| 37 | Supply only LED 14 Watts(WW) 230 V, with control driver with efficiency 90 % ,attractive type sleek LED mirror light 2 feet fitting with high output diffuser complete al as directed by Engr-in-Charge. |
| 38 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required |
| 39 | Fixing onlyExhaustfan of any sweep/typeincuding making all electric connections complete all as specified anddirected. |
| 40 | Supply only Efficiencia BLDC(Brushless Direct Current) power saver Ceiling fan 1200 mm sweep without remote complete all as directed by Engr-in-Charge. |
| 41 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 42 | M&L for fabrication of outdoor type electrical panel board 415 volt ,3 phase, 4 wire system ,cubical, dust and vermin proof with base framemade out of CRCA sheet of 2 MM thickof size 1650X1650X800MM with front opening of aluminium bus bar suitable for 1200 amperes capacity and half for neutral on PVC/FRPinsulated pads and panel board duly painted with two coat of metal powder coated paint of goodapproved qualityincluding digital metering , volt meter selector switches, power indicator RYB LED lamps and Current Transformerof suitable ratio with consisting the following electrical fitment and making space and mounting arrangement for incoming/outgoing switch gears including necessary fixing/grouting arrangement on existing floor and trench and connecting all the disconnected underground power cables including lugging and ,crimping and cable glands where ever requires with testing and commissioningto the entire satisfaction ofEngr-in-Charge :-embeded in PCC 1:4:8 type D-2 using 40mm graded stone aggragate of foundation as per manufacture instruction complete all as specified and directed comprising of thefollowing controls. i) ACB 800 Amps 4 PoleMicroprcessor Release IPR 1+ (Main Incoming). ii) MCCB 400 Amps 3Pole LN Frame : Adjustable thermal & Adjustable MagneticIcs 75% of Icu50KA -02 Nos, On load changeover switch 630 Amps, 415V, 3 phase - 01 No. iii) MCCB 250 Amps 4 Pole LN Frame : Adjustable thermal & Adjustable MagneticIcs 75% of Icu50KA -02 Nos. iv) MCCB 160 Amps 4Pole: Adjustable thermal & Adjustable MagneticIcs 75% of Icu25KA -02 Nos. v) Digital Volt Meter (o to 500Volt)-07 Nos. vi) DIgitalAmper Meter (0 to 800Amps)-07Nos. vii) CT 800/5A, Tape wounded, Cl-1-03Nos. viii) Selector Switch-14 Nos. ix) Indicator Lamp (set of Three) -01 Set |
| 43 | Supply & fix Bus bar Panel, Size:0.8x0.4x0.4 Mtr,Kisokoutdoor type, CPRI type tested, LT 440 Volts, 50 Hz , 3 Phase4 wire supply , floor mounted factory fabricated weather and vermin proof protection class IP 54 made out of 3.14 mm thick MS Sheet CRCA on angle iron 30X30X4mm frame of size suitable to incorporate following accessories with both side opening doors,locking arrangementpowder coated internally and externally, shall have channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1:3:6 typeC-2 , using 40 mm graded crushed stone aggregate as recommended by manufacturer or directed by the Engr -in - charge including earth work complete comprising of Bus bar chamber comprising 4 Nos Aluminium strip bus bars PVC insulated made of aluminium strip of size suitable for 300A current & 4 ways. PVC sheathed with colour coding including 250 AMPS MCCB 4 Pole with accessories |
| 44 | Supply and fixing of Bus Bar Chamber 100 Amps 8 Way. |
| 45 | SCHEDULE ‘A’ PART-II (SCHEDULE OF CREDIT) |
| 46 | Old U/S point wiring including switches (Rate should be quoted Rs.10.00 per point or more) |
| 47 | Old unserviceable earthing materialsof any size/capacity (Rate should be quoted Rs.65.00 each or more) |
| 48 | Old unserviceable Distrubution Board of any size/capacity (Rate should be quoted Rs.25.00 each or more) |
| 49 | Old unserviceableMCBsof any size/capacity (Rate should be quoted Rs. 5.00 each or more) |
| 50 | Old unserviceable light fittingof any size/capacity(Rate should be quoted Rs. 5.00 each or more) |
| 51 | Old unserviceable calling bell of any size/capacity (Rate should be quoted Rs. 2.00 each or more) |
| 52 | Old unserviceable Sub Main wiring of any size/capacity(Rate should be quoted Rs. 12.00 each or more) |
| 53 | Old unsv bus bar/panel of any type(Rate should be quoted Rs. 500.00 each or more) |
