|
| 1 | Demolition of cement concrete unreinforced of any description andin any position, not otherwise specifically provided for complete all as specified and directed. |
| 2 | Material and Labour for cement concrete1:2:4 type B-0, using 12.5mm graded stone aggregates for filleting, benching, slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platformfortanks wherever required complete all as specified and directed. |
| 3 | Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50 mtr but not exceeding 100 mtr as and where directed and Material and Labour for 10 mm thick screeding / rendering in cement mortar 1:4 on concrete roof surface, using Water Proofing Compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed.Note: Water Proofing Compound shall be measured and paid separately. |
| 4 | Supply only intergral water proofing compound complete all as specified and directed. |
| 5 | Material and Labour for cleaning the plastered /concrete surface with wire brush and applying water proofing treatment as under complete all as specified and directed:-(a)Apply one coat of water based bituminious primer @ 0.20 Kg per Sqm.(b)Laying APP polimerised modified membrane weighing not less than 3.5Kg / sqm by torch application method. (thickness of membrane shall not be less than 3 mm).(c) The overlap for APP membrane shall be 75 mm on longitudinal direction and100 mm on transverse direction.(d) Finally applying a coat of solar reflective bituminious aluminium paint @0.15 Kg/Sqm over the membrane. |
| 6 | Disconnecting existing tanks exc 250 Ltr & not exc 500 Ltr, setting asides (or lowering if required) for repairs, cleaning, waterproofing etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.. |
| 7 | Disconnecting existing tanks exc 500 Ltr & not exc 1000 Ltr, setting asides (or lowering if required) for repairs, cleaning, waterproofing etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 8 | Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and Material and Labour for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc. The PU foam shall have 100% solids and solvent free, and shall expand 30 to 40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and directed. Make: PIDILITE or equivalent |
| 9 | Making hole and Material and Labour for fixing metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30 to 40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and directed. Make: PIDILITE or equivalent |
| 10 | Material and Labour for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as specified and directed. |
| 11 | Material and Labour for water proofing treatment of External walls, chhajjas DFT: 110 microns by applying two coats of elestromeric coating Raincoat, material covering capabity 3 Sqm per litre in 2 Coats without dilution & 1 coat of efflorescent resistant primer 10sqm/litre/coat after cleaning the surface throughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications, complete all as specified and directed.Make :- Raincoat shall be of PlDlLlTE or equivalent. The product shall have following properties:Elongation > 100% as per ASTM D 412, Tensile strength : 2.5 Mpa as per ASTM D 412, Water Resistance conforming to SS 500, Crack bridging ability conforming to Class A4 as per EN 1062 Part 7, Positive hydrostatic pressure > 7 bar as per DIN 1048, Anti-carbonation property complying EN 1062 Part 6, RCPT conforming to ASTM C 1202. |
| 12 | Material and Labour for providing water proofing plaster at the junction of wall and slabat chajjas, lintels etc,ofaverage thickness 20mmin CM (1:3) with WPC,finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC Shall be measured and paid separately. |
| 13 | Taking down cement plaster in any description inclracking out jointshacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 14 | Material and Labour for 15 mm thick rendering on fair faces of brickwork / concrete surface on wall in CM 1:4 using WPC @ 3% by weight of cement, complete all as specified and directed.Note:- WPC shall be measured and paid seperately. |
| 15 | Material and Labour for PCC 1:3:6 type C1 (using 20mm graded aggregate) 75 mm thick as in Plinth, Path, floorwith fair finish surface with outusing extra cement complete all as specified and directed. |
| 16 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 17 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 18 | Supply and Fixingsteel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wallcomplete all as specified and directed. |
| 19 | Supply and Fixingsteel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall complete all as specified and directed. |
| 20 | Fixing onlysteel tubes of size 15 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallcomplete all as specified and directed. |
| 21 | Fixing onlysteel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallcomplete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling includingcement mortar bedding/complete and removingrubbish off the premises complete all as specified and directed. |
| 23 | Material and Labour for colouredceramic tiles in vertical surface 300 mm x 450 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 24 | Material and Labour for non-skid ceramic colouredtiles 7 mm to8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqmin floor etc set and jointed in neat cement slurry to match the work using colour tiles over screed bed on bedding layer of mortar 15mm thick is CM 1:6 over cement concrete type B-0, 1:2:4 using 12.50 mm graded stone aggregate as in floors 25 mm thick, complete all as specified and directed. |
| 25 | Material and Labour for non skidceramic coloured joint free tiles with matt finish, 7 mm to 8 mm thick ( square/ rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed in cm (1:6)complete all as specified and directed. |
| 26 | Supply and Fixing in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 mm x 440 mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete all as specified and directed. |
| 27 | Supply and Fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.. |
| 28 | Supply and Fixing in repairs stop valves cast copper alloy screwed down high pressure withcrutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed. |
| 29 | Supply and Fixing in repairsgrating square or circular 125mm diaof PTMT (minimum weight 100 gms,complete all as specified and directed. |
| 30 | Taking down drain pipes (any size or pattern), including all fittings, T,bends,etc., including cleaning for refixing or Sch of Credit (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed. |
| 31 | Supply and Fixing PVC (SWR) pipes 110 mm dia single sockets, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 32 | Supply and FixingPVC (SWR) pipes 75 mm dia single sockets, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 33 | Supply and Fixing PVC (SWR) 110mm dia bends any radius complete all as specified and directed. |
| 34 | Supply and Fixing PVC (SWR) branch 110mm bore pieces, single ( single Y ) equal or unequal complete all as specified and directed. |
| 35 | Supply and FixingPVC (SWR) junction110mm bore single ( single t) equal or unequal complete all as specified and directed. |
| 36 | Supply and Fixing PVC (SWR) 75 mm dia bends any radius complete all as specified and directed. |
| 37 | Supply and Fixing PVC (SWR) junction 75 mm bore single ( single t) equal or unequal complete all as specified and directed. |
| 38 | Supply and Fixing PVC (SWR) branch75 mm bore pieces, single ( single Y ) equal or unequal complete all as specified and directed. |
| 39 | Material and Labour for applying two coats of cement base paint to newly plastered surface of wall including preparation complete all as specified and directed.. |
| 40 | Cutting chases, pinning in brick walls, making good to facing where required and pointing in cementmortar (1:3) and making good , cutting n.exc 10cm girth, complete all as specified and directed. |
| 41 | Supply and Fixing in repair ball valves suitable for 20 mm boreiron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 42 | Supply and Fixing in repair ball valves suitable for 15 mm boreiron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 142 gms) complete all as specified and directed. |
| 43 | Supply and Fixing in repairs 15mm dia bore fency type Bib taps, cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 44 | Supply and Fixing in repairs CP two way bib taps screwed for iron pipe and fixed necessary fitting with and incl PVC connection complete all as specified and directed. |
| 45 | Supply and Fixing in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 46 | Supply and Fixing in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 47 | Supply and Fixing in repairs PVC waste outlet pipe for 32/40mm diafor WHB complete all as specified and directed. |
| 48 | Supply and Fixing in repairs PVC waste outlet pipe for 32/40mm for kitchen sink complete all as specified and directed. |
| 49 | Supply and Fixing Vitrified ceramic colouredtiles 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 , set and jointed in neat cement lsurry and pointed in white or coloured cement to match the surfaces of tiles complete all as specified and directed. |
| 50 | Supply and Fixing in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm dia and fixed complete all as specified and directed. |
| 51 | Supply and Fixing in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including hinging device complete all as specified and directed. |
| 52 | Supply and Fixing in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters to 1000 liters etc including hinging device complete all as specified and directed. |
| 53 | Supply and Fixing in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe 15 mm dia or union complete all as specified and directed. |
| 54 | Supply and Fixing in repairs Health faucet brass chromium platedwith connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe complete all as specified and directed. |
| 55 | Material and Labourfor rendering 10mm thick on fair faces of brick work or concrete surfacein cement mortar 1:6complete all as specified and directed. |
