Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of Brick tiles or terracing tiles, single layer on roofs. |
| 2 | S&F for Heat Resistant TerraceTiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet wallsin the same manner. |
| 3 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof). |
| 4 | Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight),complete all as specified and as directed. |
| 5 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inserting APP membrane, concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall. |
| 6 | M&L for providing cement concrete type 1:2:4 type B-0(12.5 mm graded agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified. |
| 7 | M&L PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface finished even and smooth complete all as specified and directed. |
| 8 | M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately) |
| 9 | Supply only of liquid water proofing compound complete all as specified and directed. |
| 10 | Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac.Notes:(1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Eight yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 11 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixingor removal to store complete all as specified and as directed by Engineer-in-Charge |
| 12 | S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 15 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge |
| 13 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixingor removal to store complete all as specified and as directed by Engineer-in-Charge |
| 14 | S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 20 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge |
| 15 | Taking up or down steel tubing 25 mm bore and connection including cleaning for refixingor removal to store complete all as specified and as directed by Engineer-in-Charge |
| 16 | S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 25 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge |
| 17 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 18 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 19 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 20 | Dismantling water tanks exc 250 Ltrs but not exc 500 ltr capacity and removing to store. |
| 21 | S&F rotantional moulded polythylene water storage tanks 500 ltr capacity tripple layered (cylindrical vertical with closedtop ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 25mm bore complete allas specified and directed. |
| 22 | Dismantling water tanks exc 500 Ltrs but not exc 1000 ltr capacity and removing to store. |
| 23 | S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity tripple layered (cylindrical vertical with closedtop) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 25mm bore complete allas specified and directed. |
| 24 | S&F in repair water tank cover complete set of capacity 500 Ltr to 2000 Ltr. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 26 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (GdeE- 250) qualityAcomplete all as directed and specified. |
| 27 | M&L for MS rolled section as in main and cross beams, hip and jack rafters , purlins, where connected to common rafter, post and running rails and guided for sliding doors fixed with angle cleats and other connecting plates complete all as specified. |
| 28 | M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed. |
| 29 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed. |
| 30 | M&L for providing RCC 1:2:4 type B-1 using 20 mm grade stone aggregate asin slab supportetd on walls, shelves, Chajjas, cantileversorsimilar workcomplete all as specified and as directed. |
| 31 | M&L for Formwork to Chajjas through and similar items including edges andsimilar work complete all as specified and as directed. |
| 32 | M&L TMT bars 10mm dia and over in reinforcementcut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified. |
| 33 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and bindersin reinforcementcut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified. |
| 34 | Demolition of brick work/stone bulder measonary built in cement mortar or cement lime mortar of any description and in any position all as specified. |
| 35 | M&L for brick work in CM (1:4) straight or curved on plan exc 6.0m mean radius and using old size sub class \"B\" bricks all as specified. |
| 36 | All as per item No 35 above but except bricks |
| 37 | M&L for providing and injecting chemical emulsion for post construction Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed. |
| 38 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc. complete all as specified and directed. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 40 | M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM (1:6) complete all as specified |
| 41 | M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM (1:6) complete all as specified |
| 42 | All as per item No. 41 above but on vertical surfaces such as skirting / dados with and including10 mm thick CM 1:4 as in backing coat complete all as specified. |
| 43 | M&L for Vitrified ceramic tiles ultra charged ( dark shade) 10mm thick (square/rectangular) area of each tileexc 0.42 sqm but notexceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM (1:4) complete all as specified |
| 44 | All as per item No. 43 above but on vertical surfaces such as skirting / dados with and including10 mm thick CM 1:4 as in backing coat complete all as specified. |
| 45 | M&L for Glazed ceramic coloured tiles in vertical surfaces 600 x 300 / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed. |
| 46 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar. |
| 47 | 20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window cills, cooking plateforms,dado/wall and like over 15mm thick cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed |
| 48 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 49 | Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/blankets, any thickness, including cover fiilets complete all as specified and directed. |
| 50 | M&L for aluminium anodised snap grid frame work of size 605 x 605mm for false ceiling with hanging arrangement of 6mm dia G.I.( upto 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made outof GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed. |
| 51 | M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed. |
| 52 | M&L forProviding and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work paid separately) |
| 53 | S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 54 | S&F in repair Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 55 | S&F in repair Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 56 | S&F in repair fancy type Stop valves, cast copper alloy, screwed down, high pressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed. |
| 57 | S&F in repair 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 58 | S&F in repair Plastic water closet seat cover White closed pattern with recessed bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete. |
| 59 | S&F in repair PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 60 | S&F in repair CP Bib taps, cast copper alloy with crutch orbutterfly handle, screwed down, screwed foriron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 61 | S&F in repair CP pillar tap, cast copper alloy with crutch orbutterfly handle, screwed down, screwed foriron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 63 | S&F in repair CP brass Tubular towel rail 20mm dia. |
| 64 | S&F in repair brackets for above item No 63. |
| 65 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws. |
| 66 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 67 | S&F in repair Corner Glass Shelf (with Bracket) |
| 68 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 69 | S&F in repair urinal Spreader complete all as specified and directed. |
| 70 | S&F in repair for Curved shaped urinal partition with frosted glass 10mm thickHeight: 900, Width: 450 |
| 71 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 72 | S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete. |
| 73 | S&Fin repairvitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including \"P\" or \"S\" trap complete all as specifed and directed. |
| 74 | S&F in repair vitreous china wash basin, white, flat back, size 550x400 excluding taps, chain and plug and porcelain stopper but including brackets, coupling, bottle trap/waste pipe complete all as specified and directed. |
| 75 | S&F in repair vitreous ChinaSquatting pan \"Orrisa\" pattren size 580x440mm white with integral foot rest complete. |
| 76 | S&F in repair Waste pipe of 1/1.5 mtr long complete. |
| 77 | S&F in repair CP Grating 125 mm dia with waste hole or without waste hole |
| 78 | S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mmmm diameter of outlet, all as specified. |
| 79 | Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75 to100 mm complete all as specified and directed. |
| 80 | S&F of 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed. |
| 81 | All as per item No 80 above but 75 mm dia PVC SWR pipe. |
| 82 | S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 83 | All as per item No 82 above but 75 mm dia PVC SWR bends. |
| 84 | Hacking out old broken glasses any thickness size, quality or description from wooden frames fixed with putty or with beads complete all as specified and as directed upto 8th floor Height. |
| 85 | Hacking out old broken glasses any thickness size, quality or description from metal frame includingpunching or drilling out old glazing pins/springclipsandprovidingand fixing new ones complete all as specified and as directed upto 8th floor Height. |
| 86 | M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed upto 8th floor Height. |
| 87 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed upto 8th floor Height. |
| 88 | Dismantling of old cabinet, cupboard/ wardrobe complete all as specified and as directed. |
| 89 | M&L for kitchen & Wardrobe / cupboardwith 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board levies of action Tesa and equivalent including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etcor sliding with track arrangement as directed including necessary accessories like stainless steel handle, Magnetic catch etcincluding all necessary fittings and fixture and8mm thick both sides PrelaminatedBSB (Both side balancing proper ) HDHMR of Action Tesa and equivalent as per IS:14587:1998 fixed. |
| 90 | Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters etc. |
| 91 | M&L for rendering 15 mm thickin cement mortor 1:4 on brick/ concrete surfaces with water proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed. Note :- The work shall be executed up to G+8th floor Height |
| 92 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth withoutusing extra cement on brick/concrete surfaces complete all specified and directed. |
| 93 | M&L for preparing New plasteres surfaces Wall and applying of Birla/JK white wall care putty approx 2 mm thickon Wall as per manufacturer\"s instruction on existingprepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper overa coat of primer paint on Wall complete all as specified and directed. |
| 94 | M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed . |
| 95 | M&L for Rendering 5mm thickwith water proofing compound incement mortar 1:3on fare faces of brick work or concrete surfaces and finished the surfaceeven and smooth without using extra cement in ceiling/ Chajjas complete all as specified. |
| 96 | M&L for prepration of new plastered surfaces of wall/ Ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces.complete all as specified and directed. |
| 97 | Complete removal of existing treatment of old surface of wall and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint interior grade over primer complete all as specified and directed by Engineer-in-Charge. |
| 98 | Complete removal of existing treatment of old surface of ceiling and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint interior grade over primer complete all as specified and directed by Engineer-in-Charge. |
| 99 | Preparation of old decorated internal wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth and applying two coats of oil bound distemper on wall surfaces complete all as specified and directed.(Note : Finishing coat to be applied with roller). |
| 100 | Preparation of old decorated internal ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth and applying one coats of Oil Bound distemper on ceilingsurface complete all as specified and directed.(Note : Finishing coat to be applied with roller). |
| 101 | Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 102 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and as directed. |
| 103 | M&L for preparation old decorated external wall surface and applying two coats of Cement base paint complete all as specified and directed by Engr-in-charge. |
| 104 | Preparation external wall and ceiling surface by complete removal of existing treatment of walls for multi storey buildings by mechanised sander of Asian Paints or equivalent as per list of makesviz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces complete all as specified and directed by Engr-in-charge. Note : 1. The work will be also executed upto four storied bldgs and necessary T&P, scaffoling is included in Quoted rates.2.Cleaning/washing and dusting of floor/wall/door/window/fittings and fixture to be carried out by contractor before handover the site |
| 105 | M&L for preparation of chequered tile or PCC or interlocking tiles surface and applying one coat of floor paint of Indigo/Berger/Asian complete all as specified and directed. |
| 106 | Complete removal of existing treatment of old surface of wall/ceiling and applying two coat of Asian paint Smartcare HYDRO LOC or Dr fixit Sure seal or Asian paint Smartcare Dampproof and applying 1mm thick putty with waterproof compound again sanding and appying two coats of acrylic emulsion paint interior grade over primer complete all as specified and directed by Engineer-in-Charge. |
| 107 | Taking down chowkats or frames with shutters(without taking offshutters from frames) areanot exceeding 1.50 sqm each complete all as specified |
| 108 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 square metre andnot exceeding 4.0 square metre each complete. |
| 109 | Taking downshutters of any description exc 1 sqm n .exc 2 Sqm each complete. |
| 110 | Taking down shutter and refixing in same opening exc1 sqm n exc 2 sqm |
| 111 | S&F for Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by E.I.C. |
| 112 | S&F for Pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by E.I.C. |
| 113 | S&F for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 114 | Forming jambs, etc. to openings (to foregoing item),CM 1:6including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 115 | Making good under cills or over arches, lintels and bressummers. Inc cement Mortar 1:6 luding allpinning when necessary |
| 116 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004. |
| 117 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020). |
| 118 | Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 119 | Factory made, Plain framed panelled shutters of 2nd class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed. |
| 120 | Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 121 | S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 122 | S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 123 | S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples |
| 124 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples |
| 125 | Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying twocoat of synthetic enamel paint, over a coat of primer complete all as specified and as directed. |
| 126 | S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 127 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 128 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 129 | S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc |
| 130 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . |
| 131 | S&F Extruded aluminum alloy handle,fabricated type,anodized 125mm size. |
| 132 | S&F Extruded aluminum alloy handle,fabricated type,anodized 150mm size. |
| 133 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 134 | S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. |
| 135 | S&F in repair Door closer hydraulically regulated, aluminum (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. |
| 136 | S&F in repair Rubber door seal 32mm wide with Aluminiumstrip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed. |
| 137 | S&F in repair fancy type Curtain rods decorative type stainless steel 25mm nominal dia of approved quality(Make VISTA) (1mm wall thickness)including fixing oftwo number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 1.80m long) complete all as directed and specified. |
| 138 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished |
| 139 | S&F in repair SS Drawer handles, projection drop (50mm to 65mm) on screwed plate complete |
| 140 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existingCGI/Asbestos sheet complete all as specified. |
| 141 | S&F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified. |
| 142 | M&L for 100 mm th Stamped cement concrete by using desin mix ofminimum cement content 250kg/cum and water cement ratio should be less than 0.55 along with maximum of10mm gradded stone aggregate, slump should not less than 100mm and addition of polpropylene fibers atthe rate of 0.6kg/Cum of any pattern like slate,cobblestone,wood plank etc of an texture and any colour by using approved sealent to protect the concrete and colour by applying color hardener,release agent, stamping mats of approved manufacturer all as per specified and as directed by engr in charge including preparation like demolation/dismantling / complete removal/ scrubbing/ of existing floor |
| 143 | Taking down hood covers of gear operated rolling shutters of opening width exc 4.00 m and height exc 5.00 m, keeping shutter for repair, cleaning old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels, complete lightening of shutter, strips and other parts, greasing/oiling of all moving components incl springs, minor welding works if required and replacement of worn out/unserviceability or rolling shutter for proper functioning. |
| 144 | All as per above item no 146 here-in-before but width n exc 4.00 m and height n exc 5.00 m. |
| 145 | Cutting of saplings of any size from buildings in any situation& at any height includingremoval of roots from roof/wall including applying root killer chemical as per manufacturers instructions and making good disturbed portion with PCC 1:2:4 Type Bo (using 12.5 mm graded stone aggregate) complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail