|
| 1 | TABLE DINING 6/8 PERSONS: DRG NO: FD-273, 30(M) |
| 2 | Material and Labour for removing unserviceableTop and Supply and fix new top of table dining 6 persons of size 1500mmx900mm made of 18mm/19mm thick Prelaminated Particale Boardincluding 4mm thick TW edging alround to top to table dining 6 persons of size and shape all as shown on drg complete all as specified and directed. |
| 3 | All as per item No 1.01 above but for table dining 8 persons ofsize 1500mm x 900mm x 18/19 mm. |
| 4 | Replacement of legs of table dinning 6/8 persons with new legs of size 75mm x 40mm x 750mm made of 1st class hard wood teak, size and shape all as shown on drg complete all as specified and directed.. |
| 5 | All as per Sr.Item No. 1.03 but long rails for 6 persons size and shape all as shown on drg. |
| 6 | All as per Sr.Item No. 1.03 but long rails for 8 persons. |
| 7 | All as per Sr.Item No. 1.03 but side rails for 6/8 persons. |
| 8 | All as per Sr.Item No. 1.03 but wooden bracket of size 100mm x 100mm x 25mm for table 6/8 persons. |
| 9 | Supply and fixing PVC/hard rubber shoe |
| 10 | Chair Dinning Cushioned (FD/MAP-II/04):- Removing of unserviceable/broken following parts of Chair dining cushion without damaging of other parts of chair and supply and fixing same new parts as shown on drg complete all as specified and directed. |
| 11 | 12mm thick MR Gde Plywood seatwith cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestry cloth shall not be less than Rs. 250/- per RM). |
| 12 | Supply and fixing only seat cover of tapestry cloth (Tapestry cloth shall be not less than Rs. 250/- per RM). |
| 13 | Front leg of size 450mm x 35mm x 50mm |
| 14 | Rear leg of size 450mm x 35mm x 50mm |
| 15 | Back Vertical stripps of size 500mm x 15mm x 50mm |
| 16 | Back rest of size 450mm x 25mm x 45mm |
| 17 | Stiffener (Side & Central one) 450mm x 20mm x 25mm |
| 18 | Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. |
| 19 | PEG TABLE (FD-277) |
| 20 | Material and Labour for removing unserviceable Top and Supply and fix new top of size 450mm x 300mm made of 18mm/19mm thick Prelaminated Particale Board including 4mm thick TW edging alroundall as shown on drg. (Make of Partical board:-as per key specification) |
| 21 | Material and Labour for removing unserviceable legs and Supply and fix new legs of size 50mm x 30mm made of 1st class hard wood teak size & shape as shown on drg. |
| 22 | All as per item No 3.02 here-in-before but long batten/rail of size 40mm x 20mm of table peg. |
| 23 | All as per item No 3.02 here-in-before but short rail/stiffener of size 40mm x 20mm of table peg. |
| 24 | Corner made of 1st class hard wood teak wood to strengthen rail and leg all as specified by Engr-in Charge. |
| 25 | PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge. |
| 26 | SOFA SET 4 / 5SEATER (FD-281) |
| 27 | Material and Labour for removing Old unserviceable cushion of sofa seat/back and provide new 100mm thick cushion (cool foam) 40 density (Make : as per key specification) covered with new tapestory cloth (not less than Rs 250/- per running mtr) size as per Drg and all as specified and as direcred by the Engineer-in- charge. |
| 28 | Supply and Fixing new tapestry cloth of best quality not less than Rs 250/- per metre as per sample approved. size as per Drg and all as specified and directed by the Engr-in- charge |
| 29 | Material and Labour for removing unserviceable front/rear legs and Supply and fix new front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg. |
| 30 | All as per item No. 4.03 here-in-before but arms. |
| 31 | All as per item No. 4.03 here-in-before but side rails. |
| 32 | All as per item No. 4.03 here-in-before but front & back rail of single seater sofa. |
| 33 | All as per Sr.item No 4.03 here-in-before but front/back rail of sofa three seater (long seat). |
| 34 | TABLE DRESSING LADIES: DRG NO: FD-251 / FD- 232 |
| 35 | Material and Labour for removing unserviceable looking Mirror of table dressing and Supply and fix new looking mirror of 5 mm thick (Make:- as per key specification) ofsize and shape as shown on drg and as directed by Engineer -in- Charge. |
| 36 | Material and Labour for removing unserviceable frame of Mirror and Supply & fix new frame of mirror of table dressing ladies of teak wood 1st class hard wood of size and shape as shown on drg and directed by Engineer-in-Charge. |
| 37 | Material and Labour for removing unserviceable back of table dressing mirror and Supply & fix new back of 6mm thick MR Gde plywood complete all as specified and directed. |
| 38 | Material and Labour for removing unserviceable cabinet/box and Supply and Fixing of entire new cabinet/box of table dressing ladies made of 18mm/19mm thick Prelaminated Particale Board with 4mm thick teak wood beading all as shown on drg complete all as specified and directed. |
| 39 | All as per Sr.Item No. 5.04 but drawers of table dressing ladies. |
| 40 | Supply and fixing Chromium plated knob 25mm dia 24mm length of best quality as approved. |
| 41 | TABLE DRESSING GENTS :(FD-230/31) |
| 42 | Material and Labour for removing unserviceable Looking Mirror and Supply and fix new 5mm thick looking mirror to table dressing gents(Make:- as per key specification)size and shape as shown on drg complete all as specified and directed. |
| 43 | Material and Labour for removing unserviceable cabinet/box and Supply and Fixing new entire cabinet/box made of 12mm thickPrelaminated Particle Board teak face shade exterior gde including 4mm thick TW edging all as shown on drg complete all as specified and directed. |
| 44 | Material and Labour for removing unserviceable drawers and Supply and fix new drawers totable dressing gentsof 12mm thickPrelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging including aluminium anodise knob(dark black)allas specified and shown on drg complete all as specified and directed. |
| 45 | Material and Labour for removing unserviceable frame of mirror and Supply and fix new frame of mirror made of1st class hard wood teak incl key plate size and shape as shown on drg. |
| 46 | Material and Labour for removing unserviceable back and Supply and fix new back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg. |
| 47 | Fixing only fitting of loose / dismantaled / sagged table dressing gents to the wallwith \"L\" Bracket (Pair) as per drg and all accessories such as screw, clips, plugs, clamps, etc complete all as directed by Engr-in-Charge.Note : Rate of bracket (pair) shall be deemed to be included in unit rate quoted. |
| 48 | TABLE CENTRE: DRG NO: FD-274, FD-235 |
| 49 | Material and Labour for removing unserviceable and Supply and fix new top of table centre of size 900mm x 450mm made of 18mm / 19mm thick MDF board exterior gde including 4mm thick TW edging alround all as shown on drg. (Make as per key specification) |
| 50 | Material & Labour for removing unserviceable legs and Supply and fix new legs of table centre of size 60mm x 30mm made of 1st class hard wood teak size and shape as shown on drg. |
| 51 | All as per Sr.item No. 7.02 here-in-before but short rail/stiffener of size 50mm x 25mm. |
| 52 | All as per Sr.item No. 7.02 here-in-before but long rail of size 50mm x 25mm. |
| 53 | Supply and fixing triangular bracket (with steel screws) of size 75mm x 75mm x 25mm of 1st class hard wood teakbetween legs and rails of Table Centre. |
| 54 | Supply & fixing PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge. |
| 55 | TEAPOY WOODEN: DRG NO: FD-278 |
| 56 | Material and Labour for removing unserviceable Top and Supply and fix new top of teapoy of size 600mm x 450mm made of 18mm/19mm thick Prelaminated Particale Board exterior grade including 4mm thick teak wood beading alround all as shown on drg. (Make as per key specification) |
| 57 | Material and Labour for removing unserviceable legs and Supply and fix new legs of teapoy of size 60mm x 30mm made of 1st class hard wood teak of size and shape as shown on drg. |
| 58 | All as per item No 8.02 here-in-before but short stiffener/rail of size 60mm x 25mm and shape as per show on drg. |
| 59 | All as per item No 8.02 here-in-before but long batten/rail of size 50mm x 25mm & shape as per shown on drg. |
| 60 | Supply and fixing with steel screw of triangular bracket of size 75mm x 75mm x 25mm of 1st class hard wood teakbetween legs and rails of Teapoy. |
| 61 | Supply and fixing PVC/hard rubber shoe complete all as directed by Engr-in-Charge. |
| 62 | TABLE WRITING: DRG NO: FD-35/249/275 |
| 63 | Material and Labour for removing unserviceableTop and Supply and fix new top of size 1145mm x 600mm made of18mm/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top of table writing size and shape all as shown on drg .(Make of Partical board:-as per key specification) |
| 64 | Material & Labour for removing unserviceable legs and Supply and fix new legs of size 55mm x 35mm x 750mm made of 1st class hard wood teak size and shape all as shown on drg. |
| 65 | All as per Sr.Item No. 9.02 but stiffners (Centre) of size 50mm x 25mm x 1145mm made of 1st class hard wood teak. |
| 66 | All as per Sr.Item No. 9.02 but side stiffener/rails of size 50mm x 25mm x 550mm of Table writing made of 1st class hard wood teak wood. |
| 67 | Material and Labour for removing unserviceable drawers and Supply and Fixing new drawers of size (as per Drg)made of 18mm/19mm thick Prelaminated Particale Boardnatural teak face shade on front side including 6 mm thick ply wood to bottom of drawers including aluminium anodised knob and all as shown on drg. |
| 68 | Material and Labour for removing unserviceable box/cupboard and Supply and Fixing new Box/cup board of table writing made of 18mm/19mm thick Prelaminated Particale Board including wall catcher size and shape all as shown on drg. |
| 69 | All as per Sr.Item No. 9.02 but door shutter of cupboard. |
| 70 | Supply and fixing triangular bracket (with steel screws) of size 100mm x 100mm x 35mm of 1st class hard wood teakbetween legs and rails of Table writing complete all as specified and directed. |
| 71 | Supply and fixing PVC/hard rubber shoe complete all as directed by Engr-in-Charge. |
| 72 | BOOK CASE: DRG NO: FD-45(M) / FD-237 |
| 73 | Material and Labour for removing unserviceable Top and Supply and fix new Top of book case made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheel with 4mm thick teak wood beading alround size and shape as shown on drg. |
| 74 | All as per Sr.Item no. 10.01 but sides of book case. |
| 75 | All as per Sr.Item No. 10.01 but shutters of book case including piano hinges and aluminium anodized knob. |
| 76 | Material and Labour for removing unserviceable bottom and Supply and fix new bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beadling all as shown on drg. |
| 77 | All as per Sr.Item No.10.04 but shelf of book case. |
| 78 | Material and Labour for removing unserviceable back and Supply and fix new back of book case made of 6mm thick MR Gde plywood all as shown on drg. |
| 79 | Material and Labour for removing unserviceable and Supply and fix new leg with batten frame of book case made of 1st class hard wood teak of size and shape as shown on drg. |
| 80 | POLISHING:-Material and labour for french polishing with best quality french polish on exposed surfaces upto good looking after removing the old polish by emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 81 | All as per Sr.Item No. 11.00 here-in-before for Table dinning 6 persons |
| 82 | All as per Sr.Item No. 11.00 here-in-before for Book case small DRG NO: FD-237/45(M) |
| 83 | All as per Sr.Item No. 11.00 here-in-before for Chair Dinning Cushioned (FD/MAP-II/04) |
| 84 | All as per Sr.Item No. 11.00 here-in-before for Peg TableDRG NO:FD-277 |
| 85 | All as per Sr.Item No. 11.00 here-in-before for Table centre DRG NO: FD-274/235 |
| 86 | All as per Sr.Item No. 11.00 here-in-before for Teapoy DRG NO: FD-278/232 |
| 87 | All as per Sr.Item No. 11.00 here-in-before for Table Dressing Gents DRG No: FD-31(M)/230 |
| 88 | All as per Sr.Item No. 11.00 here-in-before for Hat stand DRG NO: FD-233 / 206 |
| 89 | All as per Sr.Item No. 11.00 here-in-before for Table dressing ladies DRG NO: FD-251 / 32 |
| 90 | All as per Sr.Item No. 11.00 here-in-before for Table writing DRG NO: FD-275/ 249 |
| 91 | All as per Sr.Item No. 11.00 here-in-before for Sofa Chair DRG NO: FD-258 / 281 |
| 92 | All as per Sr.Item No. 11.00 here-in-before for Sofa set 3 seater DRG NO: FD-258 / 281 |
| 93 | CHAIR VERANDAH: FD-359 |
| 94 | Taking down and removing the old cane of Chair Verandah and recanning with new half round 4/5mm wide plastic cane in oval shape with mat pattern .(Plastic cane shall be of white colour of Make: as per key specification) complete all as specified and directed by the EIC. |
| 95 | Material and Labour for painting to frame of chair verandah with one coat of white synthetic enamel paint including preparation of surface. (after removing of the cane) and provide 04 Nos hard Rubber shoes of black colour to legs of chair Verandah as specified and directed by Engr-in-Charge. |
| 96 | Material & Labour for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by EIC. |
| 97 | Almirah large/medium steel (FD-1031, 1032, 1033 and 1034) |
| 98 | Material and Labour for removing unserviceable Leg and Supply and fix new leg of almirah large/medium steel made of 1mm thick M S sheet size all as per drg and duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer.(shade of colour as per directed by Engr-in-charge) |
| 99 | Material and Labour for removing unserviceable lock and Supply and fix new lock of brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - as per sample approval) |
| 100 | Material and Labour for removing unserviceable handle and Supply and fix new handle mild steel CP 125mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. |
| 101 | Material and Labour for removing unserviceable Shelf and Supply and fix new shelf of almirah large/medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 102 | Material and Labour for removing unserviceable locking device and Supply and fix new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed by Engr-in-Charge. (FD-1032). |
| 103 | All as per Sr.Item No. 13.05 here-in-before but almirah large Steel. |
| 104 | Material and Labour for removing unserviceable door shutter and Supply and fix new door shutterof almirah medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 105 | All as per Sr.Item No. 13.07 here-in-before but almirah large Steel. |
| 106 | Material and Labour for welding in repairs exceeding 2.5cm but not exceeding 5cm length and thickness of metal to be welded not exceeding 6mm all as directed. |
| 107 | TABLE OFFICE CLERK STEEL: DRG NO: FD-84 / 1004 |
| 108 | Material and Labour for removing unserviceable Top and Supply and fix new top of table office clerk steel with top made of 18mm/19mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading alround of size 1220mm x 730mm all as shown on drg and directed by Engr-in-Charge.(Make of pre-laminated particle board:- As per particular specification) |
| 109 | Material and Labour for removing unserviceable drawers and Supply and fix new drawer of table office officer/clerks steel shape made out of 1mm thick MS sheet size and shape all as specified and shown on drg. |
| 110 | Material and Labour for removing unserviceable lock and Supply and fix new brass lock 4 lever of table office officers/ clerks steel of approved best quality with duplicate keys all as specified. (MakeAs per particular specification) |
| 111 | Material and labour for preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and painting one coat to uniform finish withsynthetic enamel paint , shade as directed by GE/Engr-in-charge for the following articles:- |
| 112 | Spray painting to Almirah Large Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. (FD-1031). |
| 113 | All as per Sr.item No. 15.01 here-in-before but spray painting with synthetic enamel Olive Green paint externally portion only toalmirah Large steel. (FD-1031) |
| 114 | Spray painting to table office clerk steel except top with synthetic enamel Olive Green paint internaly and externaly, after removing denting & dust, preparation of surfaces by providing putty and red oxide primer where required complete and providing 04 Nos rubber shoes to table all as specified and directed by Engineer-in-Charge. (FD-84,381 & 1004) |
| 115 | All as per Sr.item 15.03 here-in-before but table office officer. (FD-1002 & 1003) |
| 116 | REPAIRS TO CHAIR REVOLVING/ COMPUTER : FD/E6/MAP/01 |
| 117 | Material and Labour for removing old unserviceable Gas Lifter/hydraulic assembly and Supply and Fixing new gas lift/hydraulic assy as per sample inculding tighting the frame work etc complete all as specified and directed. |
| 118 | Material and Labour for removing old unserviceable Poly Urathene Armrest and Supply and Fixing new arm rest of superior quality as per sample including nut and bolts complete all as specified and directed. |
| 119 | Material and Labour for removing unserviceable pedestal assembly and Supply and Fixing new pedestal assembly including tighting the frame work complete all as specified and directed. |
| 120 | Material and Labour for removing unserviceable castor wheel and Supply and Fixing new castor wheel of superior quality including tighting the frame work complete all as specified and directed. |
| 121 | Material and Labour for removingold seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 122 | CHAIR CBA STEEL WITH ARMS FD-75 |
| 123 | Material and Labour for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11\" x 2\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\" x 2\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge.(a)Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint of Black colour or shades approved by Engr-in-Charge (b) Supply and Fixing new Plywood 12mm thick commercial size 18½\" x 18¼\" fixed on welded MS Flat (cleats) with the help of suitable Nut & Bolt with washer for a seat and paste 50mm U Foam on plywood for cushioning of Seat coverd with tepestry cloth with the help of suitable stappler pin for upholstery work . (as per sample kept in BSO Yard) (c) Supply and Fixing new Plywood 12mm thick commercial size 18¼\" x 16\"fixed on welded MS Flat (cleats) with the help of suitable Nut & Bolt with washer for a Back and paste 50mm U Foam on plywood for cushioning of Back coverd with tepestry cloth with the help of suitable stappler pin for upholstery work .(as per sample kept in BSO Yard) .Note : Tepastry cloth (Not less than 200/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge |
| 124 | Taking down old unserviceable hand rest and Supply and Fixing new hand rest made of 2nd class hard wood duly polished in black colour as per drg complete all as specified and directed. |
| 125 | Taking down old unserviceable PVC caps and Supply and Fixing new caps as per drg complete all as specified and directed. |
| 126 | Taking down old unserviceable shoe and Supply and Fixing new PVC/hard rubber shoes complete all as specified and directed. |
