|
| 1 | Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. complete all as specified and directed. |
| 2 | Material and labour for applying evenly a priming/ tack coat with bituminous primer (using paving bitumen having grade of VG 10) at 2.50 KG per 10 sqm complete all as specified and directed. |
| 3 | Material and labour for bituminous premix semi-dense asphaltic concrete 30 mm (average) consolidated thickness with 5.5 % binder content (paving bitumen VG-30 Grade) by weight of total mix (design mix) rolled and compacted to required camber and gradient complete all as specified and directed. |
| 4 | Material and labour for preparing bituminous surfaces of road and marking paint 2.5 mm thick centre lines, stop lines, dashes, arrows etc.and the like n. exc 10 cm wide on roads with hot applied thermo plastic road marking paintwith 20% glass beads (intermixed) spread laid of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 5 | Repair to potholes n. exc 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges to at least 25 mm in depth by applying tack coat @ 5 Kg per 10 Sqm putting in bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm , binded with 0.09 Cum of stone chipping 6.3 mm size and again well rammed (incl supply of premixed macadam, binder and chippings) depth of pot holes n exc. 30 mm all as specified and directed. |
| 6 | Demolition of cement conrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed. |
| 7 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature,jointed with cement mortar 1:3 (1 Cement: 3 Coarse sand) including making joints with or without grooves (thickness of joint except at sharp curve shall not to more than 5 mm),including making drainage opening wherever required complete all as specified and directed. |
| 8 | Supply and fixing of cat eye solar reflective type of metal body alloy of size 100mm X 100mm X 20mm with PAMA striplens reflector of model No DA 972 fixed with and incl MS stud of suitable size as per manufactures instructions . Make: 3M, Dark eye and road star complete all as specified and directed. |
| 9 | Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel2.4V/ 0.3 Watt, oneNI-ed rechargeable battery (1.2V/ 1600 MA) consisting of six super bright LED with 10,000 mcd to 18,000 mcd completed as per manufacturers instructions etc all as specified and diretced. Make :3M, Dark eye and road star complete all as specified and directed. |
| 10 | Supply and fixing of metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steelpipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150X150X300mm) type B1 complete all as specified and directed.Make: 3M, Dark eye and Road star. |
| 11 | Dismantling of old/unsearviceable/ damaged road furniture items like cat eye,solar cat eye and delineator of any description. |
